Performance-Based Analysis of Coupled Support Structures and Piping Systems Subject to Seismic Loading

2015 ◽  
Author(s):  
Oreste S. Bursi ◽  
Fabrizio Paolacci ◽  
Md Shahin Reza
Keyword(s):  
Seismic Design ◽  
Seismic Analysis ◽  
Design Method ◽  
Design Guidelines ◽  
Piping System ◽  
Support Structures ◽  
Limit States ◽  
Piping Systems ◽  
Allowable Stress Design

The prevailing lack of proper and uniform seismic design guidelines for piping systems impels designers to follow standards conceived for other structures, such as buildings. The modern performance-based design approach is yet to be widely adopted for piping systems, while the allowable stress design method is still the customary practice. This paper presents a performance-based seismic analysis of petrochemical piping systems coupled with support structures through a case study. We start with a concept of performance-based analysis, followed by establishing a link between limit states and earthquake levels, exemplifying Eurocode and Italian prescriptions. A brief critical review on seismic design criteria of piping, including interactions between piping and support, is offered thereafter. Finally, to illustrate actual applications of the performance-based analysis, non-linear analyses on a realistic petrochemical piping system is performed to assess its seismic performance.

Seismic Assessment of Petrochemical Piping Systems Using a Performance-Based Approach

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Oreste S. Bursi ◽  
Fabrizio Paolacci ◽  
Md Shahin Reza ◽  
Silvia Alessandri ◽  
Nicola Tondini
Keyword(s):  
Seismic Design ◽  
Seismic Analysis ◽  
Design Method ◽  
Limit States ◽  
Design Rules ◽  
Analysis And Design ◽  
Actual Application ◽  
Piping Systems ◽  
Critical Issues ◽  
Allowable Stress Design

The need of enhanced seismic analysis and design rules for petrochemical piping systems is widely recognized, where the allowable stress design method is still the customary practice. This paper presents an up-to-date performance-based seismic analysis (PBSA) of piping systems. The concept of performance-based analysis is introduced and a link between limit states and earthquake levels is proposed, exemplifying international code prescriptions. A brief review on seismic design criteria of piping systems is then provided by identifying the main critical issues. Finally, the actual application of the performance-based approach is illustrated through nonlinear seismic analyses of two realistic petrochemical piping systems.

Main Issues on the Seismic Design of Industrial Piping Systems and Components

2013 ◽  
Author(s):  
Fabrizio Paolacci ◽  
Md. Shahin Reza ◽  
Oreste S. Bursi ◽  
Arnold M. Gresnigt ◽  
Anil Kumar
Keyword(s):  
Seismic Design ◽  
Seismic Analysis ◽  
Experimental Investigations ◽  
Piping System ◽  
Analysis And Design ◽  
Correct Definition ◽  
Component Design ◽  
Piping Systems ◽  
Current Design ◽  
Bolted Flange

A significant number of damages in piping systems and components during recent seismic events have been reported in literature which calls for a proper seismic design of these structures. Nevertheless, there exists an inadequacy of proper seismic analysis and design rules for a piping system and its components. Current seismic design Codes are found to be over conservative and some components, e.g., bolted flange joints, do not have guidelines for their seismic design. Along this line, this paper discusses about the main issues on the seismic analysis and design of industrial piping systems and components. Initially, seismic analysis and component design of refinery piping systems are described. A review of current design approaches suggested by European (EN13480:3) and American (ASME B31.3) Codes is performed through a Case Study on a piping system. Some limits of available Codes are identified and a number of critical aspects of the problem e.g., dynamic interaction between pipes and rack, correct definition of the response factor and strain versus stress approach, are illustrated. Finally, seismic performance of bolted flange joints based on the results of experimental investigations carried out by the University of Trento, Italy, will be discussed.

Seismic Qualification of Piping System by Detailed Inelastic Response Analysis: Part 2 — A Guideline for Piping Seismic Inelastic Response Analysis

2017 ◽  
Author(s):  
Akihito Otani ◽  
Tadahiro Shibutani ◽  
Masaki Morishita ◽  
Izumi Nakamura ◽  
Tomoyoshi Watakabe ◽  
...  
Keyword(s):  
Strain Amplitude ◽  
Seismic Design ◽  
Seismic Analysis ◽  
Equivalent Strain ◽  
Design Rule ◽  
Design Evaluation ◽  
Response Analysis ◽  
Piping System ◽  
Inelastic Response ◽  
Equivalent Strain Amplitude

A Code Case in the framework of JSME Nuclear Codes and Standards is currently being developed to incorporate seismic design evaluation of piping by detailed elastic-plastic response analysis and strain-based fatigue criteria as an alternative design rule to the current rule, in order to provide a more rational seismic design evaluation. The Code Case provides two strain-based criteria; one is a limit to maximum amplitude of equivalent strain amplitude derived from detailed analysis and the other is a limit to the fatigue usage factor also based on the equivalent strain amplitude. A guideline for piping seismic analysis based on inelastic response analysis is also being developed as a mandatory appendix for the code case. The guideline provides the methodology to obtain the elastic and plastic strains in seismic response and contains descriptions for analysis code, FE modeling including material property definition, time history analysis method, damping, seismic input condition and verification and validation method. This paper introduces the outlines of them.

The OECD-NEA Programme on Metallic Component Margins Under High Seismic Loads (MECOS)

2016 ◽  
Author(s):  
Pierre B. Labbé ◽  
G. R. Reddy ◽  
Cedric Mathon ◽  
François Moreau ◽  
Spyros A. Karamanos
Keyword(s):  
Seismic Analysis ◽  
Evaluation Criteria ◽  
Piping System ◽  
Seismic Loads ◽  
Metallic Component ◽  
Design Practices ◽  
Piping Systems ◽  
Current Design ◽  
New Criteria ◽  
Experimental Background

MECOS is Post-Fukushima OECD/NEA initiative, with the following main objectives: - To quantify the existing margins in seismic analysis of safety class components and assess the existing design practices within a benchmark activity. - To make proposals for new design/evaluation criteria of pressurized piping systems, accounting for their actual failure mode under strong input motions. The first part of MECOS consisted of gathering information on i) current design practices and ii) piping system experimentation carried out around the world that could be suitable for benchmarking. Part 2 is the benchmark itself and Part 3 proposals for new criteria. The purpose of the proposed paper is to present the experimental background and the benchmark exercise.

Application of Expansion Double Spherical Seismic Isolation Bearing in Seismic Design of Continuous Girder Bridges

2011 ◽  
Vol 243-249 ◽  
pp. 1928-1934 ◽  
Author(s):  
Tian Bo Peng ◽  
Zhen Nan Wang ◽  
Xun Tao Yu ◽  
Cheng Yu Yang
Keyword(s):  
Seismic Design ◽  
Seismic Isolation ◽  
Seismic Analysis ◽  
Design Method ◽  
Longitudinal Direction ◽  
Vertical Displacement ◽  
Girder Bridges ◽  
Earthquake Effect ◽  
Continuous Girder Bridge ◽  
Girder Bridge

The double spherical seismic isolation (DSSI for short) bearing has been adopted in seismic design of several important engineering projects since developed recently. It was used generally as fixed bearings in a continuous girder bridge in these projects, and only a few fixed piers, usually just one fixed pier would transmit the horizontal earthquake action to the foundation, which is uneconomical and results in the much larger seismic risk in the longitudinal direction of a continuous girder bridge than that in the transverse direction. In order to share the earthquake effect with all the piers and avoid relative vertical displacement among all the bearings under the normal traffic conditions, a new seismic design method of continuous girder bridges is introduced. The configuration and working mechanism of two kinds of DSSI bearings used to make the new seismic design possible are introduced. It’s shown that the method is preferable for the seismic design of continuous girder bridges by a numerical seismic analysis with a four-span continuous girder bridge.

The Design of Performance-Based Seismic Analysis of Main Power Plant of the Conventional Island

2011 ◽  
Vol 243-249 ◽  
pp. 3992-3996
Author(s):  
Gui Xuan Wang ◽  
Jie Zhao ◽  
Zhen Liu ◽  
Yang Zheng
Keyword(s):  
Power Plant ◽  
Seismic Design ◽  
Nuclear Power ◽  
Seismic Analysis ◽  
Design Method ◽  
Development Trend ◽  
Design Procedures ◽  
New Development ◽  
Practical Engineering ◽  
Performance Based Seismic Design

The performance-based design is a new development trend of seismic design. It is a breakthrough of the seismic design procedures. Based on the existing performance design method and some documents provided performance objective, computing and seismic structural measures, the performance-based seismic design is applied to the special structure of conventional island of the nuclear power plant. The performance-based seismic design is proved to be feasible according to a practical engineering case, as well the performance-based seismic design is needed to be further improved.

Response Characteristics of Piping System Supported by Visco-Elastic and Elasto-Plastic Dampers

1990 ◽  
Vol 112 (1) ◽  
pp. 34-38 ◽  
Author(s):  
T. Chiba ◽  
H. Kobayashi
Keyword(s):  
Energy Dissipation ◽  
Seismic Design ◽  
Damping Ratio ◽  
The Other ◽  
Piping System ◽  
Response Level ◽  
Response Characteristics ◽  
Damping Effect ◽  
Component Test ◽  
Piping Systems

Improving the reliability of the piping systems can be achieved by eliminating the mechanical snubber and by reducing the response of the piping. In the seismic design of piping system, damping is one of the important parameters to reduce the seismic response. It is reported that the energy dissipation at piping supports contributes to increasing the damping ratio of piping system. Visco-elastic damper (VED) and elasto-plastic damper (EPD) were developed as more reliable, high-damping piping supports. The dynamic characteristics of these dampers were studied by the component test and the full-scale piping model test. Damping effect of VED is independent of the piping response and VED can be modeled as a complex spring in the dynamic analysis. On the other hand, damping ratio of piping system supported by EPD increases with the piping response level. So, these dampers are helpful to increase the damping ratio and to reduce the dynamic response of piping system.

Improvement of the Damping Constants for Seismic Design of Piping System for NPP

2002 ◽  
Author(s):  
Kei Kobayashi ◽  
Takashi Satoh ◽  
Nobuyuki Kojima ◽  
Kiyoshi Hattori ◽  
Masaki Nakagawa ◽  
...  
Keyword(s):  
Power Plant ◽  
Seismic Design ◽  
Nuclear Power ◽  
Power Plants ◽  
Estimation Method ◽  
Piping System ◽  
Piping Systems ◽  
Support Element ◽  
Present Design ◽  
Bolt Support

The present design damping constants for nuclear power plant (NPP)’s piping system in Japan were developed through discussion among expert researchers, electric utilities and power plant manufactures. They are standardized in “Technical guidelines for seismic design of Nuclear Power Plants” (JEAG 4601-1991 Supplemental Edition). But some of the damping constants are too conservative because of a lack of experimental data. To improve this excessive conservatism, piping systems supported by U-bolts were chosen and U-bolt support element test and piping model excitation test were performed to obtain proper damping constants. The damping mechanism consists of damping due to piping materials, damping due to fluid interaction, damping due to plastic deformation of piping and supports, and damping due to friction and collision between piping and supports. Because the damping due to friction and collision was considered to be dominant, we focused our effort on formulating these phenomena by a physical model. The validity of damping estimation method was confirmed by comparing data that was obtained from the elemental tests and the actual scale piping model test. New design damping constants were decided from the damping estimations for piping systems in an actual plant. From now on, we will use the new design damping constants for U-bolt support piping systems, which were proposed from this study, as a standard in the Japanese piping seismic design.

Recent Developments in the Seismic Analysis of Multiply Supported Piping Systems

2004 ◽  
Author(s):  
Abhinav Gupta
Keyword(s):  
System Analysis ◽  
Seismic Analysis ◽  
Coupled System ◽  
Coupled Systems ◽  
Coupled Analysis ◽  
Piping System ◽  
Modal Damping ◽  
Peak Broadening ◽  
Piping Systems ◽  
Recent Developments

This paper presents results from some of the recent studies on seismic analysis of multiply supported piping systems. The seismic responses for an actual feedwater piping system as evaluated from the conventional uncoupled analysis are compared with those obtained from an analysis of the coupled building-piping system. A discussion is also presented on the significance of non-classical damping in such analyses. It is illustrated that the composite modal damping is just another form of classical damping. Consideration of composite modal damping in a coupled analysis can give inaccurate piping responses when the modes of uncoupled systems are nearly tuned. In such systems, the effect of nonclassical damping is quite significant. Since the floor spectra are neither generated nor required in a coupled systems analysis, methods like peak broadening or peak shifting cannot be used directly to account for the effect of uncertainties. Formulations are presented to evaluate the design response from a coupled system analysis by considering the effect of uncertainties in modal properties of uncoupled systems.

Sign in / Sign up

Export Citation Format

Share Document