Use of the concept “area efficiency of emission” in equations describing field emission from large-area electron sources

Author(s):  
Richard G. Forbes
Author(s):  
W.R. Bottoms ◽  
G.B. Haydon

There is great interest in improving the brightness of electron sources and therefore the ability of electron optical instrumentation to probe the properties of materials. Extensive work by Dr. Crew and others has provided extremely high brightness sources for certain kinds of analytical problems but which pose serious difficulties in other problems. These sources cannot survive in conventional system vacuums. If one wishes to gather information from the other signal channels activated by electron beam bombardment it is necessary to provide sufficient current to allow an acceptable signal-to-noise ratio. It is possible through careful design to provide a high brightness field emission source which has the capability of providing high currents as well as high current densities to a specimen. In this paper we describe an electrode to provide long-lived stable current in field emission sources.The source geometry was based upon the results of extensive computer modeling. The design attempted to maximize the total current available at a specimen.


2014 ◽  
Vol 2014 ◽  
pp. 1-23 ◽  
Author(s):  
Alireza Nojeh

Carbon nanotubes have a host of properties that make them excellent candidates for electron emitters. A significant amount of research has been conducted on nanotube-based field-emitters over the past two decades, and they have been investigated for devices ranging from flat-panel displays to vacuum tubes and electron microscopes. Other electron emission mechanisms from carbon nanotubes, such as photoemission, secondary emission, and thermionic emission, have also been studied, although to a lesser degree than field-emission. This paper presents an overview of the topic, with emphasis on these less-explored mechanisms, although field-emission is also discussed. We will see that not only is electron emission from nanotubes promising for electron-source applications, but also its study could reveal unusual phenomena and open the door to new devices that are not directly related to electron beams.


2010 ◽  
Vol 10 (1) ◽  
pp. 237-243 ◽  
Author(s):  
Huibiao Liu ◽  
Zheng Liu ◽  
Xuemin Qian ◽  
Yanbing Guo ◽  
Shuang Cui ◽  
...  

Author(s):  
Arash A. Fomani ◽  
Michael E. Swanwick ◽  
Luis F. Velasquez-Garcia ◽  
Akintunde I. Akinwande

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1931
Author(s):  
Minh Nhat Dang ◽  
Minh Dang Nguyen ◽  
Nguyen Khac Hiep ◽  
Phan Ngoc Hong ◽  
In Hyung Baek ◽  
...  

We herein present an alternative geometry of nanostructured carbon cathode capable of obtaining a low turn-on field, and both stable and high current densities. This cathode geometry consisted of a micro-hollow array on planar carbon nanostructures engineered by femtosecond laser. The micro-hollow geometry provides a larger edge area for achieving a lower turn-on field of 0.70 V/µm, a sustainable current of approximately 2 mA (about 112 mA/cm2) at an applied field of less than 2 V/µm. The electric field in the vicinity of the hollow array (rim edge) is enhanced due to the edge effect, that is key to improving field emission performance. The edge effect of the micro-hollow cathode is confirmed by numerical calculation. This new type of nanostructured carbon cathode geometry can be promisingly applied for high intensity and compact electron sources.


Sign in / Sign up

Export Citation Format

Share Document