Multi-point sensor based on SMS fiber structure

Author(s):  
Yadira Fuentes-Rubio ◽  
Rene Fernando F. Dominguez-Cruz ◽  
Oscar Baldovino-Pantaleón ◽  
Daniel Alberto May-Arrioja
Keyword(s):  
TAPPI Journal ◽  
2010 ◽  
Vol 9 (7) ◽  
pp. 15-21 ◽  
Author(s):  
JI-YOUNG LEE ◽  
CHUL-HWAN KIM ◽  
JEONG-MIN SEO ◽  
HO-KYUNG CHUNG ◽  
KYUNG-KIL BACK ◽  
...  

Eco-friendly cushioning materials were made with thermomechanical pulps (TMPs) from waste woods collected from local mountains in Korea, using a suction-forming method without physical pressing. The TMP cushions had superior shock-absorbing performance, with lower elastic moduli than expanded polystyrene (EPS) or molded pulp. Even though the TMP cushions made using various suction times had many voids in their inner fiber structure, their apparent densities were a little higher than that of EPS and much lower than that of molded pulp. The addition of cationic starch contributed to an increase in the elastic modulus of the TMP cushions without increasing the apparent density, an effect which was different from that of surface sizing with starch. In the impact test, the TMP cushions showed a more ductile pattern than the brittle EPS. The porosity of the TMP cushion was a little less than that of EPS and much greater than that of molded pulp. The porous structure of the TMP cushions contributed to their excellent thermal insulating capacity, which was equivalent to that of EPS. In summary, the TMP packing cushions showed great potential for surviving external impacts during product distribution.


TAPPI Journal ◽  
2018 ◽  
Vol 17 (08) ◽  
pp. 437-443
Author(s):  
Lebo Xu ◽  
Jeremy Meyers ◽  
Peter Hart

Coffee edge-wicking testing was conducted on two groups of highly-sized paperboard manufactured at two mills with similar manufacturing processes, but with vastly different local fiber sources. Although the Hercules size test (HST) indicated similar internal size levels between the two types of board, the edge-wicking behavior was noticeably different. Analysis of fiber structure revealed that the board with more edge-wicking had fibers with thicker fiber walls, which kept the fiber lumen more open after pressing and drying on a paper machine. It was demonstrated that liquid penetration through voids between fibers in highly-sized paperboard was limited, because the fiber surface was well protected by the presence of sufficient sizing agent. Nevertheless, freshly exposed fiber walls and lumens at the cut edge of the sheet were not protected by sizing material, which facilitated edge-wicking. The correlation between fiber structure and edge-wicking behavior was highlighted in this work to inspire development of novel sizing strategies that protect the freshly cut edge of the sheet from edge-wicking.


Author(s):  
Volker A. Coenen ◽  
Bastian E. Sajonz ◽  
Peter C. Reinacher ◽  
Christoph P. Kaller ◽  
Horst Urbach ◽  
...  

Abstract Background An increasing number of neurosurgeons use display of the dentato-rubro-thalamic tract (DRT) based on diffusion weighted imaging (dMRI) as basis for their routine planning of stimulation or lesioning approaches in stereotactic tremor surgery. An evaluation of the anatomical validity of the display of the DRT with respect to modern stereotactic planning systems and across different tracking environments has not been performed. Methods Distinct dMRI and anatomical magnetic resonance imaging (MRI) data of high and low quality from 9 subjects were used. Six subjects had repeated MRI scans and therefore entered the analysis twice. Standardized DICOM structure templates for volume of interest definition were applied in native space for all investigations. For tracking BrainLab Elements (BrainLab, Munich, Germany), two tensor deterministic tracking (FT2), MRtrix IFOD2 (https://www.mrtrix.org), and a global tracking (GT) approach were used to compare the display of the uncrossed (DRTu) and crossed (DRTx) fiber structure after transformation into MNI space. The resulting streamlines were investigated for congruence, reproducibility, anatomical validity, and penetration of anatomical way point structures. Results In general, the DRTu can be depicted with good quality (as judged by waypoints). FT2 (surgical) and GT (neuroscientific) show high congruence. While GT shows partly reproducible results for DRTx, the crossed pathway cannot be reliably reconstructed with the other (iFOD2 and FT2) algorithms. Conclusion Since a direct anatomical comparison is difficult in the individual subjects, we chose a comparison with two research tracking environments as the best possible “ground truth.” FT2 is useful especially because of its manual editing possibilities of cutting erroneous fibers on the single subject level. An uncertainty of 2 mm as mean displacement of DRTu is expectable and should be respected when using this approach for surgical planning. Tractographic renditions of the DRTx on the single subject level seem to be still illusive.


Optik ◽  
2020 ◽  
Vol 223 ◽  
pp. 165420
Author(s):  
Jing He ◽  
He You ◽  
Qi Zhang ◽  
Xiangjun Xin ◽  
Haokun Yang ◽  
...  

2006 ◽  
Vol 10 (4) ◽  
pp. 380-388 ◽  
Author(s):  
Claudio RONCO ◽  
Nathan LEVIN ◽  
Alessandra BRENDOLAN ◽  
Federico NALESSO ◽  
Dinna CRUZ ◽  
...  

Author(s):  
Song Wang ◽  
Weigang Zhang ◽  
LEI CHEN ◽  
Yanxin Zhang ◽  
Pengcheng Geng ◽  
...  

1975 ◽  
Vol 5 (3) ◽  
pp. 424-432 ◽  
Author(s):  
J. E. Nicholson ◽  
W. E. Hillis ◽  
N. Ditchburne

The relationship between level of longitudinal growth strain and stress, modulus of elasticity, basic density, volumetric shrinkage, fiber classification, and stem form was investigated with 10 Eucalyptusregnans regrowth trees. Close relationships were observed. It is suggested that variations in these properties within trees are closely controlled, possibly to enable optimum positioning of the tree crown in relation to its immediate environment. The concept of fiber structure varying as a response to environment is supported by the observed variation in wood properties within and between trees of this species. The often-reported association between eccentric radial growth and reaction wood was not substantiated in this study.The data indicate that if economically justifiable, it would be possible to segregate trees that are likely to contain material that is hard to season.


2012 ◽  
Vol 134 (30) ◽  
pp. 12658-12667 ◽  
Author(s):  
Emily B. Dunkelberger ◽  
Lauren E. Buchanan ◽  
Peter Marek ◽  
Ping Cao ◽  
Daniel P. Raleigh ◽  
...  

1987 ◽  
Vol 44 (5) ◽  
pp. 375-382 ◽  
Author(s):  
Kensuke SAKURAI ◽  
Kooji HAYAKAWA ◽  
Toshisada TAKAHASHI

Sign in / Sign up

Export Citation Format

Share Document