V-line: a new interconnect for packaging and microwave applications

Author(s):  
Jose E. Schutt-Aine ◽  
Jin-Fa Lee
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions


2019 ◽  
Vol 76 (3-4) ◽  
pp. 180-188
Author(s):  
Bianca Nicla Romano

Art. 24 of the 1948 Declaration of Human Rights recognises and protects the right of the individual to rest and leisure. This right has to be fully exercised without negative consequences on the right to work and the remuneration. Tourism can be considered one of the best ways of rest and leisure because it allows to enrich the personality of the individual. Even after the reform of the Title V this area is no longer covered by the Italian Constitution, the Italian legal system protects and guarantees it as a real right, so as to get to recognize its existence and the consequent compensation of the so-called “ruined holiday damage”. This kind of damage has not a patrimonial nature, but a moral one, and the Tourist-Traveler can claim for it when he has not been able to fully enjoy his holiday - the essential fulcrum of tourism - intended as an opportunity for leisure and/or rest, essential rights of the individual.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Tariqul Islam ◽  
Md. Moniruzzaman ◽  
Touhidul Alam ◽  
Md Samsuzzaman ◽  
Qutaiba A. Razouqi ◽  
...  

AbstractIn this paper, a meander-lines-based epsilon negative (ENG) metamaterial (MTM) with a high effective medium ratio (EMR) and near-zero refractive index (NZI) is designed and investigated for multiband microwave applications. The metamaterial unit cell is a modification of the conventional square split-ring resonator in which the meander line concept is utilized. The meander line helps to increase the electrical length of the rings and provides strong multiple resonances within a small dimension. The unit cell of proposed MTM is initiated on a low-cost FR4 substrate of 1.5 mm thick and electrical dimension of 0.06λ × 0.06λ, where wavelength, λ is calculated at the lowest resonance frequency (2.48 GHz). The MTM provides four major resonances of transmission coefficient (S21) at 2.48, 4.28, 9.36, and 13.7 GHz covering S, C, X, and Ku bands. It shows negative permittivity, near-zero permeability, and near-zero refractive index in the vicinity of these resonances. The equivalent circuit is designed and modeled in Advanced Design System (ADS) software. The simulated S21 of the MTM unit cell is compared with the measured one and both show close similarity. The array performance of the MTM is also evaluated by using 2 × 2, 4 × 4, and 8 × 8 arrays that show close resemblance with the unit cell. The MTM offers a high effective medium ratio (EMR) of 15.1, indicating the design's compactness. The frequency hopping characteristics of the proposed MTM is investigated by open and short-circuited the three outer rings split gaps by using three switches. Eight different combinations of the switching states provide eight different sets of multiband resonances within 2–18 GHz; those give the flexibility of using the proposed MTM operating in various frequency bands. For its small dimension, NZI, high EMR, and frequency hopping characteristics through switching, this metamaterial can be utilized for multiband microwave applications, especially to enhance the gain of multiband antennas.


Sign in / Sign up

Export Citation Format

Share Document