scholarly journals Development of a field-portable small-size impedance analyzer for structural health monitoring using the electromechanical impedance technique

2004 ◽  
Author(s):  
Victor Giurgiutiu ◽  
Buli Xu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Impedance Analyzer ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Impedance Technique

Method for removing temperature effect in impedance-based structural health monitoring systems using polynomial regression

2020 ◽  
pp. 147592172091712 ◽  
Author(s):  
Bárbara M Gianesini ◽  
Nicolás E Cortez ◽  
Rothschild A Antunes ◽  
Jozue Vieira Filho
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Temperature Effect ◽  
Health Monitoring ◽  
Monitoring Systems ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Detection Systems ◽  
Impedance Technique ◽  
Health Monitoring Systems

Structural health monitoring systems are employed to evaluate the state of structures to detect damage, bringing economical and safety benefits. The electromechanical impedance technique is a promising damage detection tool since it evaluates structural integrity by only measuring the electrical impedance of piezoelectric transducers bonded to structures. However, in real-world applications, impedance-based damage detection systems exhibit strong temperature dependence; therefore, variations associated with temperature changes may be confused as damage. In this article, the temperature effect on the electrical impedance of piezoelectric ceramics attached to structures is analyzed. Besides, a new methodology to compensate for the temperature effect in the electromechanical impedance technique is proposed. The method is very general since it can be applied to nonlinear (polynomial) temperature and/or frequency dependences observed on the horizontal and vertical shifts of the impedance signatures. A computer algorithm that performs the compensation was developed, which can be easily incorporated into real-time damage detection systems. This compensation technique is applied successfully to two aluminum beams and one steel pipe, minimizing the effect of temperature variations on damage detection structural health monitoring systems in the temperature range from −40°C to 80°C and the frequency range from 10 to 90 kHz.

Research on Miniaturized and Portable Impedance-Measuring Device for Structural Health Monitoring

2011 ◽  
Vol 230-232 ◽  
pp. 587-591
Author(s):  
Yu Xiang Zhang ◽  
Dong Dong Wen ◽  
Hua Cheng Li ◽  
Fu Hou Xu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Damage ◽  
Electric Impedance ◽  
Measuring Device ◽  
Line System ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Impedance Technique ◽  
On Line

Electromechanical impedance technique which based on smart material is a new method for structural damage detection, and it could be widely applied in structural health monitoring field. However, a very expensive and bulky analyzer is being used to measure the impedance, which is not practical for on-line system. Therefore, this paper developed a device that can measure the electric impedance using small modular electric components and reasonable circuit. Experiments are carried out to test the aluminum beam crack. Results indicate that the device can measure the electric impedance and detect the damage effectively. The proposed method provides a solution to miniaturize the impedance-measuring equipment and reduce the cost of measurement.

scholarly journals Performance of three transducer mounting methods in impedance-based structural health monitoring applications

2017 ◽  
Vol 28 (17) ◽  
pp. 2349-2362 ◽  
Author(s):  
Ricardo Zanni Mendes da Silveira ◽  
Leandro Melo Campeiro ◽  
Fabricio Guimarães Baptista
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Health Monitoring ◽  
Piezoelectric Ceramics ◽  
Alternative Methods ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Damage Indices ◽  
Monitoring Applications ◽  
Impedance Technique

Piezoelectric transducers are widely used in many nondestructive methods for damage detection in structural health monitoring applications. Among the various methods for detecting damage, the electromechanical impedance technique is known for using thin and small piezoelectric ceramics operating simultaneously as actuators and sensors. The basic method of installing these piezoelectric ceramics in the host structure is using a high-stiffness adhesive such as epoxy or cyanoacrylate glue. However, some studies have proposed alternative methods of transducer mounting, therein aiming to reuse the transducer or allowing for the monitoring of structures under adverse conditions under which the direct installation of the sensor would not be possible. Thus, the objective of this study is to analyze and compare the performance of three main mounting methods for metal structures for applications based on the electromechanical impedance technique: magnetic mounting, metal-wire-based mounting, and conventional mounting using adhesives. Tests were conducted on aluminum beams, and the performances of the three transducer mounting methods were compared using basic damage indices and the pencil-lead-break test. The experimental results indicate that the mounting method has a significant effect on the frequency response and sensitivity for damage detection.

Diagnosis and validation of damaged piezoelectric sensor in electromechanical impedance technique

2016 ◽  
Vol 28 (7) ◽  
pp. 837-850 ◽  
Author(s):  
Demi Ai ◽  
Hui Luo ◽  
Hongping Zhu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Damage ◽  
Piezoelectric Sensor ◽  
Bonding Layer ◽  
The Real ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Validity Assessment ◽  
Impedance Technique

Piezoelectric sensor diagnosis and validity assessment as a prior component of structural health monitoring system are necessary in the practical application of electromechanical impedance technique. This article proposed an innovative sensor self-diagnosis process based on extracting the characterization of the real admittance (inverse of impedance) signature within a high-frequency range, which covered both diagnosis on damaged sensor after its installation and discrimination of sensor and structural damages during structural health monitoring process. Theoretical analysis was derived from the impedance model of piezoelectric-bonding layer-structure dynamic interaction system. Experimental investigations on piezoelectric sensor-bonded steel beam involved with structural damages of mass addition and notch damage were conducted to verify the process. It was found that the real admittance was reliable and critical in sensor diagnosis, and sensor faults of debonding, scratch, and breakage can be identified and differentiated from structural damage. Validity assessment of the diagnosed damaged sensor was addressed through resonant frequency shift method. The results showed that the validity of damaged sensor for structural health monitoring was inordinately depreciated by sensor damage. This article is expected to be useful for structural health monitoring application especially when damaged piezoelectric sensors existed.

Review of piezoelectric impedance based structural health monitoring: Physics-based and data-driven methods

2021 ◽  
pp. 136943322110384
Author(s):  
Xingyu Fan ◽  
Jun Li ◽  
Hong Hao
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Damage ◽  
Low Frequency ◽  
Data Driven ◽  
Mode Shapes ◽  
Monitoring Methods ◽  
Destructive Testing ◽  
Electromechanical Impedance ◽  
Structural Health

Vibration based structural health monitoring methods are usually dependent on the first several orders of modal information, such as natural frequencies, mode shapes and the related derived features. These information are usually in a low frequency range. These global vibration characteristics may not be sufficiently sensitive to minor structural damage. The alternative non-destructive testing method using piezoelectric transducers, called as electromechanical impedance (EMI) technique, has been developed for more than two decades. Numerous studies on the EMI based structural health monitoring have been carried out based on representing impedance signatures in frequency domain by statistical indicators, which can be used for damage detection. On the other hand, damage quantification and localization remain a great challenge for EMI based methods. Physics-based EMI methods have been developed for quantifying the structural damage, by using the impedance responses and an accurate numerical model. This article provides a comprehensive review of the exciting researches and sorts out these approaches into two categories: data-driven based and physics-based EMI techniques. The merits and limitations of these methods are discussed. In addition, practical issues and research gaps for EMI based structural health monitoring methods are summarized.

Sign in / Sign up

Export Citation Format

Share Document