A method for determination of frequency‐dependent effective scatterer number density

1994 ◽  
Vol 95 (1) ◽  
pp. 77-85 ◽  
Author(s):  
Jian‐Feng Chen ◽  
Ernest L. Madsen ◽  
James A. Zagzebski
1984 ◽  
Vol 2 (4) ◽  
pp. 449-465 ◽  
Author(s):  
C. Deutsch

This survey is devoted to a few basic atomic problems associated with the stopping of nonrelativistic pointlike ions in dense and hot matter, and also to the Stark broadening diagnostics of the resulting beam-produced plasmas.First, we consider the free electron contribution, taken in the RPA approximation with an exact dynamic dielectric function, valid at any temperature. Therefore, we obtain stopping power and straggling for any projectile velocity. The temperature dependence is of special relevance for a projectile energy smaller than 5 MeV/a.m.u.Next, we revise the Barkas effect (Z3 corrections) through a novel and compact formulation, which is based on an analogy with electron impact broadening theory. It facilitates inclusion of the non hydrogenic and electronic structure of the target ions, in a more selective way. The results may increase the usual Z2-stopping by 15 to 30 per cent corrections.Then, we show how the Stark broadening diagnostics of the compressed D + T fuel, seeded with high Z species, arising from the surrounding envelopes, may provide accurate determination of the electron number density ne. In this connection, it should be appreciated that the relatively long compression times (≃ 20 nsec) suggested by the HIBALL numerical simulation allow for a nearly Local Thermodynamic Equilibrium (LTE) state in the target, with Te ≃ Ti. As a consequence, spectroscopic measurements are expected to be easier to implement in HIF targets, than in laser ones.A tentative proposal for the use of Stark broadening diagnostics of inflight excited and highly stripped ion projectiles is displayed in § 5.Experiments involving an HIB produced by a standard accelerator, and interacting with an independently produced coronal plasma are finally outlined.


2000 ◽  
Vol 180 ◽  
pp. 190-195
Author(s):  
J. Souchay

AbstractDespite the fact that the main causes of the differences between the observed Earth nutation and that derived from analytical calculations come from geophysical effects associated with nonrigidity (core flattening, core-mantle interactions, oceans, etc…), efforts have been made recently to compute the nutation of the Earth when it is considered to be a rigid body, giving birth to several “rigid Earth nutation models.” The reason for these efforts is that any coefficient of nutation for a realistic Earth (including effects due to nonrigidity) is calculated starting from a coefficient for a rigid-Earth model, using a frequency-dependent transfer function. Therefore it is important to achieve high quality in the determination of rigid-Earth nutation coefficients, in order to isolate the nonrigid effects still not well-modeled.After reviewing various rigid-Earth nutation models which have been established recently and their relative improvement with respect to older ones, we discuss their specifics and their degree of agreement.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Stefano Perni ◽  
Polina Prokopovich

AbstractDespite the well-established dependence of cartilage mechanical properties on the frequency of the applied load, most research in the field is carried out in either load-free or constant load conditions because of the complexity of the equipment required for the determination of time-dependent properties. These simpler analyses provide a limited representation of cartilage properties thus greatly reducing the impact of the information gathered hindering the understanding of the mechanisms involved in this tissue replacement, development and pathology. More complex techniques could represent better investigative methods, but their uptake in cartilage research is limited by the highly specialised training required and cost of the equipment. There is, therefore, a clear need for alternative experimental approaches to cartilage testing to be deployed in research and clinical settings using more user-friendly and financial accessible devices. Frequency dependent material properties can be determined through rheometry that is an easy to use requiring a relatively inexpensive device; we present how a commercial rheometer can be adapted to determine the viscoelastic properties of articular cartilage. Frequency-sweep tests were run at various applied normal loads on immature, mature and trypsinased (as model of osteoarthritis) cartilage samples to determine the dynamic shear moduli (G*, G′ G″) of the tissues. Moduli increased with increasing frequency and applied load; mature cartilage had generally the highest moduli and GAG depleted samples the lowest. Hydraulic permeability (KH) was estimated from the rheological data and decreased with applied load; GAG depleted cartilage exhibited higher hydraulic permeability than either immature or mature tissues. The rheometer-based methodology developed was validated by the close comparison of the rheometer-obtained cartilage characteristics (G*, G′, G″, KH) with results obtained with more complex testing techniques available in literature. Rheometry is relatively simpler and does not require highly capital intensive machinery and staff training is more accessible; thus the use of a rheometer would represent a cost-effective approach for the determination of frequency-dependent properties of cartilage for more comprehensive and impactful results for both healthcare professional and R&D.


Sign in / Sign up

Export Citation Format

Share Document