Determination of Young’s modulus and internal friction coefficient from flexural wave in thin bars

1999 ◽  
Vol 105 (2) ◽  
pp. 1348-1348 ◽  
Author(s):  
Qiushuang Guo ◽  
David A. Brown
Keyword(s):  
Friction Coefficient ◽  
Internal Friction ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Flexural Wave ◽  
Internal Friction Coefficient

scholarly journals Study of the nature of the dynamic coefficient of internal friction of grainmaterials

2019 ◽  
Vol 135 ◽  
pp. 01102
Author(s):  
Dmitriy Savenkov ◽  
Oleg Kirischiev ◽  
Ylia Kirischieva ◽  
Tatiana Tupolskikh ◽  
Tatiana Maltseva ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Internal Friction ◽  
Agricultural Production ◽  
Mechanical Characteristics ◽  
Dynamic Coefficient ◽  
Bulk Materials ◽  
Dynamic Coefficients ◽  
Internal Friction Coefficient ◽  
Physical And Mechanical Characteristics

The article highlights the issues related to the study of physical and mechanical characteristics of bulk materials, namely internal friction coefficients in static and dynamic modes. An innovative device of the carousel type for determining the frictional characteristics of bulk materials is described, which allows to implement the tasks of practical determination of dynamic coefficients of internal friction. Presented the program, methodology and results of research on the practical study of the internal friction coefficient of typical bulk products of agricultural production in the range of linear velocities of displacement of layers from 0 to 2.79 m/s, the reliability of which is not lower than 0.878.

A Method for the Determination of Young's Modulus and Internal Friction in Metallic Glasses

1971 ◽  
Vol 42 (6) ◽  
pp. 885-886 ◽  
Author(s):  
M. Barmatz ◽  
H. J. Leamy ◽  
H. S. Chen
Keyword(s):  
Internal Friction ◽  
Young’S Modulus ◽  
Metallic Glasses ◽  
Young's Modulus

scholarly journals Determination of temperature dependences of Young's modulus and internal friction of fuel cladding by resonance method

2019 ◽  
Vol 277 ◽  
pp. 03011
Author(s):  
A A Moshev ◽  
S P Martynenko ◽  
S S Martynenko ◽  
E M Kudryavtsev ◽  
A N Ableyev ◽  
...  
Keyword(s):  
Internal Friction ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Resonance Method ◽  
Temperature Dependences ◽  
Computer Codes ◽  
Measuring Module ◽  
Cladding Material ◽  
Elastic Characteristics

We study elastic characteristics and internal friction of fuel claddings to improve computer codes for VVER-1000 fuel rods. We analytically described elastic characteristics of cladding material and obtained coefficient of the form of the first longitudinal frequency numerically. We described new measuring module for automatic acquisition data. We’ve established temperature dependences of Young’s modulus and internal friction via high-temperature facility and developed electronic module and noted maximum of these characteristics at the temperature 1160 K. It can be explained by the destruction of the texture in the material of claddings.

Is it necessary to calculate Young’s modulus in AFM nanoindentation experiments regarding biological samples?

2020 ◽  
Vol 12 ◽  
Author(s):  
S.V. Kontomaris ◽  
A. Malamou ◽  
A. Stylianou
Keyword(s):  
Young’S Modulus ◽  
Biological Samples ◽  
Young's Modulus ◽  
Reference Sample ◽  
Nonlinear Behavior ◽  
Accurate Method ◽  
Accurate Solution ◽  
Hertz Model ◽  
Work Done

Background: The determination of the mechanical properties of biological samples using Atomic Force Microscopy (AFM) at the nanoscale is usually performed using basic models arising from the contact mechanics theory. In particular, the Hertz model is the most frequently used theoretical tool for data processing. However, the Hertz model requires several assumptions such as homogeneous and isotropic samples and indenters with perfectly spherical or conical shapes. As it is widely known, none of these requirements are 100 % fulfilled for the case of indentation experiments at the nanoscale. As a result, significant errors arise in the Young’s modulus calculation. At the same time, an analytical model that could account complexities of soft biomaterials, such as nonlinear behavior, anisotropy, and heterogeneity, may be far-reaching. In addition, this hypothetical model would be ‘too difficult’ to be applied in real clinical activities since it would require very heavy workload and highly specialized personnel. Objective: In this paper a simple solution is provided to the aforementioned dead-end. A new approach is introduced in order to provide a simple and accurate method for the mechanical characterization at the nanoscale. Method: The ratio of the work done by the indenter on the sample of interest to the work done by the indenter on a reference sample is introduced as a new physical quantity that does not require homogeneous, isotropic samples or perfect indenters. Results: The proposed approach, not only provides an accurate solution from a physical perspective but also a simpler solution which does not require activities such as the determination of the cantilever’s spring constant and the dimensions of the AFM tip. Conclusion: The proposed, by this opinion paper, solution aims to provide a significant opportunity to overcome the existing limitations provided by Hertzian mechanics and apply AFM techniques in real clinical activities.

scholarly journals Apparent Young’s Modulus of the Adhesive in Numerical Modeling of Adhesive Joints

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 328
Author(s):  
Kamil Anasiewicz ◽  
Józef Kuczmaszewski
Keyword(s):  
Numerical Model ◽  
Young’S Modulus ◽  
Adhesive Joint ◽  
Young's Modulus ◽  
Precise Determination ◽  
Adhesive Joints ◽  
Experimental Conditions ◽  
Element Simulation ◽  
Joint Material

This article is an evaluation of the phenomena occurring in adhesive joints during curing and their consequences. Considering changes in the values of Young’s modulus distributed along the joint thickness, and potential changes in adhesive strength in the cured state, the use of a numerical model may make it possible to improve finite element simulation effects and bring their results closer to experimental data. The results of a tensile test of a double overlap adhesive joint sample, performed using an extensometer, are presented. This test allowed for the precise determination of the shear modulus G of the cured adhesive under experimental conditions. Then, on the basis of the research carried out so far, a numerical model was built, taking the differences observed in the properties of the joint material into account. The stress distribution in a three-zone adhesive joint was analyzed in comparison to the standard numerical model in which the adhesive in the joint was treated as isotropic. It is proposed that a joint model with three-zones, differing in the Young’s modulus values, is more accurate for mapping the experimental results.

scholarly journals A parametric prediction of the Young’s modulus of polymers enhanced with ΜWCNTs

2018 ◽  
Vol 233 ◽  
pp. 00025
Author(s):  
P.V. Polydoropoulou ◽  
K.I. Tserpes ◽  
Sp.G. Pantelakis ◽  
Ch.V. Katsiropoulos
Keyword(s):  
Young’S Modulus ◽  
Elastic Properties ◽  
Young's Modulus ◽  
Experimental Results ◽  
Scale Model ◽  
Fe Model ◽  
Multi Scale ◽  
Unit Cells ◽  
Random Dispersion

In this work a multi-scale model simulating the effect of the dispersion, the waviness as well as the agglomerations of MWCNTs on the Young’s modulus of a polymer enhanced with 0.4% MWCNTs (v/v) has been developed. Representative Unit Cells (RUCs) have been employed for the determination of the homogenized elastic properties of the MWCNT/polymer. The elastic properties computed by the RUCs were assigned to the Finite Element (FE) model of a tension specimen which was used to predict the Young’s modulus of the enhanced material. Furthermore, a comparison with experimental results obtained by tensile testing according to ASTM 638 has been made. The results show a remarkable decrease of the Young’s modulus for the polymer enhanced with aligned MWCNTs due to the increase of the CNT agglomerations. On the other hand, slight differences on the Young’s modulus have been observed for the material enhanced with randomly-oriented MWCNTs by the increase of the MWCNTs agglomerations, which might be attributed to the low concentration of the MWCNTs into the polymer. Moreover, the increase of the MWCNTs waviness led to a significant decrease of the Young’s modulus of the polymer enhanced with aligned MWCNTs. The experimental results in terms of the Young’s modulus are predicted well by assuming a random dispersion of MWCNTs into the polymer.

Sign in / Sign up

Export Citation Format

Share Document