Effects of acoustic nonlinearity on through-tissue communication performance

2021 ◽  
Vol 149 (4) ◽  
pp. A132-A132
Author(s):  
Gizem Tabak ◽  
Michael L. Oelze ◽  
Andrew C. Singer
2020 ◽  
pp. 87-97
Author(s):  
Sourish Chatterjee ◽  
Biswanath Roy

In an office space, an LED-based lighting system allows you to perform the function of a data transmitter. This article discusses the cost-effective design and development of a data-enabled LED driver that can transmit data along with its receiving part. In addition, this paper clearly outlines the application of the proposed VLC system in an office environment where ambient light interference is a severe issue of concern. The result shows satisfactory lighting characteristics in general for this area in terms of average horizontal illuminance and illuminance uniformity. At the same time, to evaluate real-time and static communication performance, Arduino interfaced MATLAB Simulink model is developed, which shows good communication performance in terms of BER (10–7) even in presence of ambient light noise with 6 dB signal to interference plus noise ratio. Our designed system is also flexible to work as a standalone lighting system, whenever data communication is not required.


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Anderson Augusto Simiscuka ◽  
Gabriel-Miro Muntean

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 600
Author(s):  
Sunghwan Park ◽  
Yeryoung Suh ◽  
Jaewoo Lee

Federated learning is a learning method that collects only learned models on a server to ensure data privacy. This method does not collect data on the server but instead proceeds with data directly from distributed clients. Because federated learning clients often have limited communication bandwidth, communication between servers and clients should be optimized to improve performance. Federated learning clients often use Wi-Fi and have to communicate in unstable network environments. However, as existing federated learning aggregation algorithms transmit and receive a large amount of weights, accuracy is significantly reduced in unstable network environments. In this study, we propose the algorithm using particle swarm optimization algorithm instead of FedAvg, which updates the global model by collecting weights of learned models that were mainly used in federated learning. The algorithm is named as federated particle swarm optimization (FedPSO), and we increase its robustness in unstable network environments by transmitting score values rather than large weights. Thus, we propose a FedPSO, a global model update algorithm with improved network communication performance, by changing the form of the data that clients transmit to servers. This study showed that applying FedPSO significantly reduced the amount of data used in network communication and improved the accuracy of the global model by an average of 9.47%. Moreover, it showed an improvement in loss of accuracy by approximately 4% in experiments on an unstable network.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sourish Chatterjee ◽  
Biswanath Roy

AbstractIn recent time of looming radio frequency (RF) spectrum crisis, visible light communication using lighting infrastructure emerged as a potential alternative at an indoor environment. This paper addresses the setback associated with ambient light interference in an indoor Visible Light Communication (VLC) system to ensure joint communication and illumination performance inside an office room. A novel VLC architecture with suitable white light emitting diode (WLED) luminaire arrangement is presented to minimize the dispersion of signal to interference plus noise ratio (SINR) across the room. Luminaires are categorized in two groups viz. data transmitting illuminants and illuminants for lighting purpose. The first group is dedicated to transmit data as well as serves the purpose of illumination. The other set creates only ambient illumination to achieve quality lighting attributes. The proposed forward error corrected receiver configuration discards the ambient light noise originated by the illuminants that serve the ambient illumination. Tail biting convolutional encoder and viterbi decoder are used at the encoding section of the transmitter and decoding section of the receiver respectively to improve bit error rate. Results obtained through MATLAB simulation shows better average bit error rate (BER) in the order of 10−8 measured at uniformly distributed 25 grid points over the working plane. At the same time achieved average horizontal illuminance with good uniformity comply with ISO recommendation.


Sign in / Sign up

Export Citation Format

Share Document