Experimental realization of an active non-reciprocal metamaterial using an eigen-structure assignment control strategy

2021 ◽  
Vol 150 (2) ◽  
pp. 1092-1107
Author(s):  
H. Zhou ◽  
A. Baz
2009 ◽  
Vol 06 (02) ◽  
pp. 205-240 ◽  
Author(s):  
JUNG-YUP KIM ◽  
ILL-WOO PARK ◽  
JUN-HO OH

In this paper, dynamic stair climbing and descending are experimentally realized for a biped humanoid robot, HUBO. Currently, in addition to biped walking on the ground, other types of biped walking such as running, jogging, and stair walking (climbing and descending) have been also studied since the end of 1990. In spite of many years of research works on stair walking, it is still a challengeable topic that requires high performance of control technique. For dynamic stair walking, we designed stair climbing and descending patterns according to a known stair configuration. Next, we defined stair climbing and descending stages for a switching control strategy. In each stage, we designed and adopted several online controllers to maintain the balance. For the simplicity and easy application, the online controllers only use the force and torque signals of the force/torque sensors of the feet. Finally, the effectiveness and performance of the proposed strategy are verified through stair climbing and descending experiments of HUBO.


1980 ◽  
Author(s):  
Harold F. Engler ◽  
Esther L. Davenport ◽  
Joanne Green ◽  
William E. Sears

TAPPI Journal ◽  
2018 ◽  
Vol 17 (05) ◽  
pp. 295-305
Author(s):  
Wesley Gilbert ◽  
Ivan Trush ◽  
Bruce Allison ◽  
Randy Reimer ◽  
Howard Mason

Normal practice in continuous digester operation is to set the production rate through the chip meter speed. This speed is seldom, if ever, adjusted except to change production, and most of the other digester inputs are ratioed to it. The inherent assumption is that constant chip meter speed equates to constant dry mass flow of chips. This is seldom, if ever, true. As a result, the actual production rate, effective alkali (EA)-to-wood and liquor-to-wood ratios may vary substantially from assumed values. This increases process variability and decreases profits. In this report, a new continuous digester production rate control strategy is developed that addresses this shortcoming. A new noncontacting near infrared–based chip moisture sensor is combined with the existing weightometer signal to estimate the actual dry chip mass feedrate entering the digester. The estimated feedrate is then used to implement a novel feedback control strategy that adjusts the chip meter speed to maintain the dry chip feedrate at the target value. The report details the results of applying the new measurements and control strategy to a dual vessel continuous digester.


Sign in / Sign up

Export Citation Format

Share Document