Mineral chemistry of the Qitianling granitoid and the Furong tin ore deposit in Hunan Province, South China: implication for the genesis of granite and related tin mineralization

2005 ◽  
Vol 17 (4) ◽  
pp. 635-648 ◽  
Author(s):  
Kui-Dong Zhao ◽  
Shao-Yong Jiang ◽  
Yao-Hui Jiang ◽  
Ru-Chen Wang
2017 ◽  
Vol 88 ◽  
pp. 638-654 ◽  
Author(s):  
Zhilin Wang ◽  
Deru Xu ◽  
Guoxiang Chi ◽  
Yongjun Shao ◽  
Jianqing Lai ◽  
...  

2021 ◽  
pp. 104306
Author(s):  
Yueqiang Zhou ◽  
Deru Xu ◽  
Guojun Dong ◽  
Guoxiang Chi ◽  
Teng Deng ◽  
...  

2017 ◽  
Vol 90 ◽  
pp. 998-1017 ◽  
Author(s):  
Xuefei Liu ◽  
Qingfei Wang ◽  
Qizuan Zhang ◽  
Shujuan Yang ◽  
Ying Zhang ◽  
...  

2018 ◽  
Vol 92 ◽  
pp. 42-60 ◽  
Author(s):  
Shaohao Zou ◽  
Fenghui Zou ◽  
Juntao Ning ◽  
Teng Deng ◽  
Deshui Yu ◽  
...  

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 446
Author(s):  
Zhiming Xu ◽  
Chengquan Wu ◽  
Zhengwei Zhang ◽  
Jinhong Xu ◽  
Xiyao Li ◽  
...  

Manganese and Fe have similar geochemical properties in the supergene environment. Separation of Mn and Fe is an important process for the formation of high-grade sedimentary manganese deposits. Large-scale manganese carbonate deposits (total reserves of approximately 700 Mt) were formed during the interglacial of the Sturtian and Marinoan in South China. The orebodies are hosted in the black rock series at the basal Datangpo Formation of the Cryogenian period. The Fe contents in ores range from 1.15 to 7.18 wt.%, with an average of 2.80 wt.%, and the average Mn/Fe ratio is 8.9, indicating a complete separation of Mn and Fe during the formation of manganese ores. Here, we present element data of manganese carbonates and sulfur isotopes of pyrite from the Dawu deposit, Guizhou, China, aiming to investigate the separation mechanism of Mn and Fe and the ore genesis. The Fe in ores mainly occurs as carbonate (FeCO3) and pyrite (FeS2). The Mn, Ca, Mg and Fe exist in the form of isomorphic substitutions in manganese carbonate. The contents of FeCO3 in manganese carbonates are similar in different deposits, with averages of 2.6–2.8 wt.%. The whole-rock Fe and S contents have an obvious positive correlation (R = 0.69), indicating that the difference of whole-rock Fe content mainly comes from the pyrite content. The δ34SV-CDT of pyrite varies from 40.0 to 48.3‰, indicating that the pyrite formed in a restricted basin where sulfate supply was insufficient and the sulfate concentrations were extremely low. Additionally, the whole-rock Fe content is negatively correlated with the δ34S values of the whole-rock and pyrite, with correlation coefficients of −0.78 and −0.83, respectively. Two stages of separations of Mn and Fe might have occurred during the mineralization processes. The reduced seawater became oxidized gradually after the Sturtian glaciation, and Fe2+ was oxidized and precipitated before Mn2+, which resulted in the first-stage separation of Mn and Fe. The residual Mn-rich and Fe-poor seawater flowed into the restricted rift basin. Mn and Fe were then precipitated in sediments as oxyhydroxide as the seawater was oxidized. At the early stage of diagenesis, organic matter was oxidized, and manganese oxyhydroxide was reduced, forming the manganese carbonate. H2S was insufficient in the restricted basin due to the extremely low sulfate concentration. The Fe2+ was re-released due to the lack of H2S, resulting in the second-stage separation of Mn and Fe. Finally, the manganese carbonate deposit with low Fe and very high δ34S was formed in the restricted basin after the Sturtian glaciation.


2018 ◽  
Vol 6 (3) ◽  
pp. T635-T647 ◽  
Author(s):  
Zhenghui Xiao ◽  
Jisong Liu ◽  
Jingqiang Tan ◽  
Rongfeng Yang ◽  
Jason Hilton ◽  
...  

We have investigated the geologic features of the lower Cambrian-aged Niutitang Shale in the northwestern Hunan province of South China. Our results indicate that the Niutitang Shale has abundant and highly mature algal kerogen with total organic carbon (TOC) content ranging from 0.6% to 18.2%. The equivalent vitrinite reflectance (equal-Ro) value is between 2.5% and 4.3%. Mineral constituents are dominated by quartz and clay. The average quartz content (62.8%) is much higher than that of clay minerals (26.1%), and this suggests a high brittleness index. Organic-matter pores, interparticle pores, intraparticle pores, interlaminated fractures, and structural fractures are all well developed. The porosity ranges from 0.6% to 8.8%, with an average of 4.8%, whereas the permeability varies from 0.0018 to [Formula: see text] (microdarcy) (averaging [Formula: see text]). The porosity of TOC- and clay-rich shale samples is generally higher than that of quartz-rich shale samples. The gas adsorption capacity of the Niutitang Shale varies from 2.26 to [Formula: see text], with a mean value of [Formula: see text]. The TOC content appears to significantly influence gas adsorption capacity. In general, TOC-rich samples exhibit a much higher adsorption capacity than TOC-poor samples.


Sign in / Sign up

Export Citation Format

Share Document