MULTIPLE APPROACHES TO QUANTIFYING EFFECTIVE POROSITY OF THE DEVONIAN-AGED WOODFORD SHALE IN OKLAHOMA

2020 ◽  
Author(s):  
Chen Zhao ◽  
◽  
Hu Qinhong ◽  
Qiming Wang ◽  
Jing Zhang ◽  
...  
2017 ◽  
Author(s):  
Gabin Archambault

This 5 km resolution grid presents groundwater storage in Africa (in mm). This parameter was estimated by combining the saturated aquifer thickness and effective porosity of aquifers across Africa. For each aquifer flow/storage type an effective porosity range was assigned based on a series of studies across Africa and surrogates in other parts of the world. Groundwater storage is given in millimeters. Detailed description of the methodology, and a full list of data sources used to develop the layer can be found in the peer-reviewed paper available here: http://iopscience.iop.org/article/10.1088/1748-9326/7/2/024009/pdf The raster and a high resolution PDF file are available for download on the website of British Geological Survey (BGS): http://www.bgs.ac.uk/research/groundwater/international/africanGroundwater/mapsDownload.html Groundwater Storage


Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 208
Author(s):  
Takuma Hasegawa ◽  
Kotaro Nakata ◽  
Rhys Gwynne

For radioactive waste disposal, it is important that local groundwater flow is slow as groundwater flow is the main transport medium for radioactive nuclides in geological formations. When the groundwater flow is very slow, diffusion is the dominant transport mechanism (diffusion-dominant domain). Key pieces of evidence indicating a diffusion-dominant domain are the separation of components and the fractionation of isotopes by diffusion. To prove this, it is necessary to investigate the different diffusion coefficients for each component and the related stable isotope fractionation factors. Thus, in this study, through-diffusion and effective-porosity experiments were conducted on selected artificial materials and natural rocks. We also undertook measurements relating to the isotope fractionation factors of Cl and Br isotopes for natural samples. For natural rock samples, the diffusion coefficients of water isotopes (HDO and H218O) were three to four times higher than those of monovalent anions (Cl−, Br- and NO3−), and the isotope fractionation factor of 37Cl (1.0017–1.0021) was slightly higher than that of free water. It was experimentally confirmed that the isotope fractionation factor of 81Br was approximately 1.0007–1.0010, which is equivalent to that of free water. The enrichment factor of 81Br was almost half that of 37Cl. The effective porosity ratios of HDO and Cl were slightly different, but the difference was not significant compared to the ratio of their diffusion coefficients. As a result, component separation was dominated by diffusion. For artificial samples, the diffusion coefficients and effective porosities of HDO and Cl were almost the same; it was thus difficult to assess the component separation by diffusion. However, isotope fractionation of Cl and Br was confirmed using a through-diffusion experiment. The results show that HDO and Cl separation and isotope fractionation of Cl and Br can be expected in diffusion-dominant domains in geological formations.


2017 ◽  
Vol 902 ◽  
pp. 60-64
Author(s):  
Judith Alejandra Velázquez Perez ◽  
Wilfrido Martínez Molina ◽  
Hugo Luis Chávez García ◽  
Elia Mercedes Alonso Guzmán ◽  
Rosalía Ruiz Ruiz

This research is an investigation about the use of powder material additions with mortars lime base for a possible implementation in construction and/or restoration of historical sites. Mortars were elaborated in laboratory conditions with a 1:2.5 in weight proportion. One of the proofs to which these mortars were submitted was the test of capillary absorption; this way, the influence of the materials added to powder in these mortars determined porosity. Mortars were made with different percentages of materials. These powder materials are brick manufacturing ash, quarry powder, clay and maize starch. The test was run during 350 to 700 days. It obtained better results with 700 days than with 350 days.


2014 ◽  
Vol 602-605 ◽  
pp. 528-532
Author(s):  
Shen Chun Wu ◽  
Chang Yu Wu ◽  
Weie Jhih Lin ◽  
Jia Ruei Chen ◽  
Yau Ming Chen

This paper specifically addresses the effect of changing the constant temperature region of the sintering temperature curve in manufacturing nickel powder capillary structure (wick) on the performance of a flat loop heat pipe (FLHP). The sintering temperature curve is composed of three regions: a region of increasing temperature, a region of constant temperature, and a region of decreasing temperature, with the sintering time and temperature in the region of constant temperature having significant effect on the permeability of the wick. In this study, for wick manufacturing the temperatures in this region tested range from 550°C to 650°C and the time from 30 minutes to 60 minutes. The properties and internal parameters of the wick are measured, and the wick is placed into FLHP for performance testing. Experimental results show that at sintering temperature of 550°C and lasting about 45 minutes, maximum heat load is 200W, minimum thermal resistance is 0.32°C/W, permeability is , porosity is 66%, effective porosity is 3.8and heat flux is around 21W/cm2; related literatures have only reported maximum heat load increase of 25%.


Sign in / Sign up

Export Citation Format

Share Document