Fluctuations of total electron content in the ionosphere as deduced from measurements by single-frequency GPS receivers

2010 ◽  
Vol 50 (7) ◽  
pp. 868-872
Author(s):  
O. A. Gorbachev ◽  
V. B. Ivanov ◽  
P. V. Ryabkov
Keyword(s):  
Total Electron Content ◽  
Single Frequency ◽  
Electron Content ◽  
Total Electron ◽  
Gps Receivers

Performance Evaluation of USTEC Product for Single-Frequency Precise Point Positioning

GEOMATICA ◽  
2013 ◽  
Vol 67 (4) ◽  
pp. 253-257 ◽  
Author(s):  
Mahmoud Abd El-Rahman ◽  
Ahmed El-Rabbany
Keyword(s):  
Total Electron Content ◽  
Precise Point Positioning ◽  
Ionospheric Delay ◽  
Single Frequency ◽  
Electron Content ◽  
Dual Frequency ◽  
Total Electron ◽  
Gps Receivers ◽  
Mitigation Techniques ◽  
Point Positioning

Geodetic-grade dual-frequency GPS receivers are typically used for precise point positioning (PPP). Unfortunately, these receiver systems are expensive and may not provide a cost-effective solution in many instances. The use of low-cost single-frequency GPS receivers, on the other hand, are limited by the effect of ionospheric delay. A number of mitigation techniques have been proposed to account for the effect of ionospheric delay for single-frequency GPS users. Unfortunately, however, those mitigation techniques are not suitable for PPP. More recently, the U.S. Total Electron Content (USTEC) product has been developed by the National Oceanic and Atmospheric Administration (NOAA), which describes the ionospheric total electron content in high resolution over most of North America. This paper investigates the performance of USTEC and studies its effect on single-frequency PPP solution. A performance comparison with two widely-used ionospheric mitigation models is also presented.

scholarly journals Real-Time Global Ionospheric Map and Its Application in Single-Frequency Positioning

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1138 ◽  
Author(s):  
Liang Zhang ◽  
Yibin Yao ◽  
Wenjie Peng ◽  
Lulu Shan ◽  
Yulin He ◽  
...  
Keyword(s):  
Real Time ◽  
Total Electron Content ◽  
Precise Point Positioning ◽  
Single Frequency ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Total Electron ◽  
Time Service ◽  
Point Positioning ◽  
Raw Observations

The prevalence of real-time, low-cost, single-frequency, decimeter-level positioning has increased with the development of global navigation satellite systems (GNSSs). Ionospheric delay accounts for most errors in real-time single-frequency GNSS positioning. To eliminate ionospheric interference in real-time single-frequency precise point positioning (RT-SF-PPP), global ionospheric vertical total electron content (VTEC) product is designed in the next stage of the International GNSS Service (IGS) real-time service (RTS). In this study, real-time generation of a global ionospheric map (GIM) based on IGS RTS is proposed and assessed. There are three crucial steps in the process of generating a real-time global ionospheric map (RTGIM): estimating station differential code bias (DCB) using the precise point positioning (PPP) method, deriving slant total electron content (STEC) from PPP with raw observations, and modeling global vertical total electron content (VTEC). Experiments were carried out to validate the algorithm’s effectiveness. First, one month’s data from 16 globally distributed IGS stations were used to validate the performance of DCB estimation with the PPP method. Second, 30 IGS stations were used to verify the accuracy of static PPP with raw observations. Third, the modeling of residuals was assessed in high and quiet ionospheric activity periods. Afterwards, the quality of RTGIM products was assessed from two aspects: (1) comparison with the Center for Orbit Determination in Europe (CODE) global ionospheric map (GIM) products and (2) determination of the performance of RT-SF-PPP with the RTGIM. Experimental results show that DCB estimation using the PPP method can realize an average accuracy of 0.2 ns; static PPP with raw observations can achieve an accuracy of 0.7, 1.2, and 2.1 cm in the north, east, and up components, respectively. The average standard deviations (STDs) of the model residuals are 2.07 and 2.17 TEC units (TECU) for moderate and high ionospheric activity periods. Moreover, the average root-mean-square (RMS) error of RTGIM products is 2.4 TECU for the one-month moderate ionospheric period. Nevertheless, for the high ionospheric period, the RMS is greater than the RMS in the moderate period. A sub-meter-level horizontal accuracy and meter-level vertical accuracy can be achieved when the RTGIM is employed in RT-SF-PPP.

scholarly journals Influence of the Ionosphere Model on the Solution of a VLBI Geodetic Experiment

1988 ◽  
Vol 129 ◽  
pp. 551-552
Author(s):  
G. Petit ◽  
J. F. Lestrade ◽  
C. Boucher ◽  
F. Biraud ◽  
A. Rius ◽  
...  
Keyword(s):  
South America ◽  
Total Electron Content ◽  
Dual Band ◽  
Single Frequency ◽  
Electron Content ◽  
Critical Aspect ◽  
Total Electron ◽  
Geodetic Vlbi ◽  
Ionosphere Model ◽  
First Time

The GRIG-2 geodetic VLBI experiment was conducted in 1985, linking for the first time South America, Europe and Africa. At the single frequency band of 1.66 GHz which was used, the monitoring of the ionosphere is a critical aspect and several predictions of Total Electron Content (TEC) were used. One of them is derived from dual band Doppler observations of TRANSIT satellites, which were simultaneously conducted. The influence of these models on the solution is presented, with comparisons with other VLBI solutions. Decimetric accuracy has been achieved.

scholarly journals A Refinement Method of Real-Time Ionospheric Model for China

2020 ◽  
Vol 12 (20) ◽  
pp. 3354
Author(s):  
Yang Wang ◽  
Yibin Yao ◽  
Liang Zhang ◽  
Mingshan Fang
Keyword(s):  
Real Time ◽  
Total Electron Content ◽  
Global Navigation Satellite Systems ◽  
Single Frequency ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Ionospheric Model ◽  
Total Electron ◽  
Satellite Systems ◽  
Refinement Method

Ionospheric delay is a crucial error source and determines the source of single-frequency precise point positioning (SF-PPP) accuracy. To meet the demands of real-time SF-PPP (RT-SF-PPP), several international global navigation satellite systems (GNSS) service (IGS) analysis centers provide real-time global ionospheric vertical total electron content (VTEC) products. However, the accuracy distribution of VTEC products is nonuniform. Proposing a refinement method is a convenient means to obtain a more accuracy and consistent VTEC product. In this study, we proposed a refinement method of a real-time ionospheric VTEC model for China and carried out experiments to validate the model effectiveness. First, based on the refinement method and the Centre National d’Études Spatiales (CNES) VTEC products, three refined real-time global ionospheric models (RRTGIMs) with one, three, and six stations in China were built via GNSS observations. Second, the slant total electron content (STEC) and Jason-3 VTEC were used as references to evaluate VTEC accuracy. Third, RT-SF-PPP was used to evaluate the accuracy in the positioning domain. Results showed that even if using only one station to refine the global ionospheric model, the refined model achieved a better performance than CNES and the Center for Orbit Determination in Europe (CODE). The refinement model with six stations was found to be the best of the three refinement models.

scholarly journals NeQuick-G performance assessment for space applications

GPS Solutions ◽  
2019 ◽  
Vol 24 (1) ◽  
Author(s):  
Oliver Montenbruck ◽  
Belén González Rodríguez
Keyword(s):  
Electron Density ◽  
Total Electron Content ◽  
Thick Layer ◽  
Computational Effort ◽  
Low Earth Orbit ◽  
Single Frequency ◽  
Electron Content ◽  
Path Delay ◽  
Space Applications ◽  
Total Electron

AbstractOther than traditional single-layer ionosphere models for global navigation satellite system (GNSS) receivers, the NeQuick-G model of Galileo provides a fully three-dimensional description of the electron density and obtains the ionospheric path delay by integration along the line of sight. While optimized for users on or near the surface of the earth, NeQuick-G can thus as well be used for ionospheric correction of single-frequency observations from spaceborne platforms. Based on slant and total electron content measurements obtained in the Swarm mission, the performance of NeQuick-G for users in low earth orbit is assessed for periods of high and low solar activity as well as different orientations of the orbital plane with respect to the sun and the region of high total electron content. A slant range correction performance of better than 70% is achieved in more than 85% of the examined epochs in good accord with the performance reported for terrestrial users. Likewise, the positioning errors can be notably reduced when applying the NeQuick-G corrections in single-frequency navigation solutions. For users at orbital altitudes, it is furthermore shown that vertical total electron predictions from NeQuick-G may be favorably combined with an elevation-dependent thick-layer mapping function to reduce the high computational effort associated with the integration of the electron density along the ray path for each tracked GNSS satellite.

Sign in / Sign up

Export Citation Format

Share Document