Data driven Vertical Total Electron Content workflow for GNSS positioning for single frequency receivers

2016 ◽  
Author(s):  
Susana Sanchez-Naranjo ◽  
Fabio A. Gonzalez ◽  
Raul Ramos-Pollan ◽  
Marc Sole
Keyword(s):  
Total Electron Content ◽  
Data Driven ◽  
Single Frequency ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Total Electron ◽  
Gnss Positioning

scholarly journals Real-Time Global Ionospheric Map and Its Application in Single-Frequency Positioning

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1138 ◽  
Author(s):  
Liang Zhang ◽  
Yibin Yao ◽  
Wenjie Peng ◽  
Lulu Shan ◽  
Yulin He ◽  
...  
Keyword(s):  
Real Time ◽  
Total Electron Content ◽  
Precise Point Positioning ◽  
Single Frequency ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Total Electron ◽  
Time Service ◽  
Point Positioning ◽  
Raw Observations

The prevalence of real-time, low-cost, single-frequency, decimeter-level positioning has increased with the development of global navigation satellite systems (GNSSs). Ionospheric delay accounts for most errors in real-time single-frequency GNSS positioning. To eliminate ionospheric interference in real-time single-frequency precise point positioning (RT-SF-PPP), global ionospheric vertical total electron content (VTEC) product is designed in the next stage of the International GNSS Service (IGS) real-time service (RTS). In this study, real-time generation of a global ionospheric map (GIM) based on IGS RTS is proposed and assessed. There are three crucial steps in the process of generating a real-time global ionospheric map (RTGIM): estimating station differential code bias (DCB) using the precise point positioning (PPP) method, deriving slant total electron content (STEC) from PPP with raw observations, and modeling global vertical total electron content (VTEC). Experiments were carried out to validate the algorithm’s effectiveness. First, one month’s data from 16 globally distributed IGS stations were used to validate the performance of DCB estimation with the PPP method. Second, 30 IGS stations were used to verify the accuracy of static PPP with raw observations. Third, the modeling of residuals was assessed in high and quiet ionospheric activity periods. Afterwards, the quality of RTGIM products was assessed from two aspects: (1) comparison with the Center for Orbit Determination in Europe (CODE) global ionospheric map (GIM) products and (2) determination of the performance of RT-SF-PPP with the RTGIM. Experimental results show that DCB estimation using the PPP method can realize an average accuracy of 0.2 ns; static PPP with raw observations can achieve an accuracy of 0.7, 1.2, and 2.1 cm in the north, east, and up components, respectively. The average standard deviations (STDs) of the model residuals are 2.07 and 2.17 TEC units (TECU) for moderate and high ionospheric activity periods. Moreover, the average root-mean-square (RMS) error of RTGIM products is 2.4 TECU for the one-month moderate ionospheric period. Nevertheless, for the high ionospheric period, the RMS is greater than the RMS in the moderate period. A sub-meter-level horizontal accuracy and meter-level vertical accuracy can be achieved when the RTGIM is employed in RT-SF-PPP.

scholarly journals A Refinement Method of Real-Time Ionospheric Model for China

2020 ◽  
Vol 12 (20) ◽  
pp. 3354
Author(s):  
Yang Wang ◽  
Yibin Yao ◽  
Liang Zhang ◽  
Mingshan Fang
Keyword(s):  
Real Time ◽  
Total Electron Content ◽  
Global Navigation Satellite Systems ◽  
Single Frequency ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Ionospheric Model ◽  
Total Electron ◽  
Satellite Systems ◽  
Refinement Method

Ionospheric delay is a crucial error source and determines the source of single-frequency precise point positioning (SF-PPP) accuracy. To meet the demands of real-time SF-PPP (RT-SF-PPP), several international global navigation satellite systems (GNSS) service (IGS) analysis centers provide real-time global ionospheric vertical total electron content (VTEC) products. However, the accuracy distribution of VTEC products is nonuniform. Proposing a refinement method is a convenient means to obtain a more accuracy and consistent VTEC product. In this study, we proposed a refinement method of a real-time ionospheric VTEC model for China and carried out experiments to validate the model effectiveness. First, based on the refinement method and the Centre National d’Études Spatiales (CNES) VTEC products, three refined real-time global ionospheric models (RRTGIMs) with one, three, and six stations in China were built via GNSS observations. Second, the slant total electron content (STEC) and Jason-3 VTEC were used as references to evaluate VTEC accuracy. Third, RT-SF-PPP was used to evaluate the accuracy in the positioning domain. Results showed that even if using only one station to refine the global ionospheric model, the refined model achieved a better performance than CNES and the Center for Orbit Determination in Europe (CODE). The refinement model with six stations was found to be the best of the three refinement models.

Analysis of ionospheric vertical total electron content before the 1 April 2014 Mw 8.2 Chile earthquake

2017 ◽  
Vol 21 (6) ◽  
pp. 1599-1612 ◽  
Author(s):  
Weiping Jiang ◽  
Yifang Ma ◽  
Xiaohui Zhou ◽  
Zhao Li ◽  
Xiangdong An ◽  
...  
Keyword(s):  
Total Electron Content ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Total Electron ◽  
Chile Earthquake

scholarly journals Adaptive Modeling of the Global Ionosphere Vertical Total Electron Content

2020 ◽  
Vol 12 (11) ◽  
pp. 1822
Author(s):  
Eren Erdogan ◽  
Michael Schmidt ◽  
Andreas Goss ◽  
Barbara Görres ◽  
Florian Seitz
Keyword(s):  
Total Electron Content ◽  
Temporal Variations ◽  
Model Parameters ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Model Uncertainties ◽  
Data Set ◽  
Total Electron ◽  
B Spline ◽  
Run Time

The Kalman filter (KF) is widely applied in (ultra) rapid and (near) real-time ionosphere modeling to meet the demand on ionosphere products required in many applications extending from navigation and positioning to monitoring space weather events and naturals disasters. The requirement of a prior definition of the stochastic models attached to the measurements and the dynamic models of the KF is a drawback associated with its standard implementation since model uncertainties can exhibit temporal variations or the time span of a given test data set would not be large enough. Adaptive methods can mitigate these problems by tuning the stochastic model parameters during the filter run-time. Accordingly, one of the primary objectives of our study is to apply an adaptive KF based on variance component estimation to compute the global Vertical Total Electron Content (VTEC) of the ionosphere by assimilating different ionospheric GNSS measurements. Secondly, the derived VTEC representation is based on a series expansion in terms of compactly supported B-spline functions. We highlight the morphological similarity of the spatial distributions and the magnitudes between VTEC values and the corresponding estimated B-spline coefficients. This similarity allows for deducing physical interpretations from the coefficients. In this context, an empirical adaptive model to account for the dynamic model uncertainties, representing the temporal variations of VTEC errors, is developed in this work according to the structure of B-spline coefficients. For the validation, the differential slant total electron content (dSTEC) analysis and a comparison with Jason-2/3 altimetry data are performed. Assessments show that the quality of the VTEC products derived by the presented algorithm is in good agreement, or even more accurate, with the products provided by IGS ionosphere analysis centers within the selected periods in 2015 and 2017. Furthermore, we show that the presented approach can be applied to different ionosphere conditions ranging from very high to low solar activity without concerning time-variable model uncertainties, including measurement error and process noise of the KF because the associated covariance matrices are computed in a self-adaptive manner during run-time.

Estimating the quality of GEMTEC total electron content model in autonomous GNSS positioning

2015 ◽  
Vol 6 (3) ◽  
pp. 241-245 ◽  
Author(s):  
O. A. Gorbachev ◽  
V. T. Zalutskii ◽  
V. B. Ivanov ◽  
D. V. Khazanov ◽  
A. A. Kholmogorov
Keyword(s):  
Total Electron Content ◽  
Electron Content ◽  
Total Electron ◽  
Gnss Positioning ◽  
Content Model

scholarly journals Influence of the Ionosphere Model on the Solution of a VLBI Geodetic Experiment

1988 ◽  
Vol 129 ◽  
pp. 551-552
Author(s):  
G. Petit ◽  
J. F. Lestrade ◽  
C. Boucher ◽  
F. Biraud ◽  
A. Rius ◽  
...  
Keyword(s):  
South America ◽  
Total Electron Content ◽  
Dual Band ◽  
Single Frequency ◽  
Electron Content ◽  
Critical Aspect ◽  
Total Electron ◽  
Geodetic Vlbi ◽  
Ionosphere Model ◽  
First Time

The GRIG-2 geodetic VLBI experiment was conducted in 1985, linking for the first time South America, Europe and Africa. At the single frequency band of 1.66 GHz which was used, the monitoring of the ionosphere is a critical aspect and several predictions of Total Electron Content (TEC) were used. One of them is derived from dual band Doppler observations of TRANSIT satellites, which were simultaneously conducted. The influence of these models on the solution is presented, with comparisons with other VLBI solutions. Decimetric accuracy has been achieved.

Sign in / Sign up

Export Citation Format

Share Document