Studying of Quaternary Salt of 2-Allyl-4-isooctyl-6-piperidinomethylphenol As Corrosion Inhibitor in Water–Salt and Hydrocarbon Media

2019 ◽  
Vol 93 (11) ◽  
pp. 2163-2166
Author(s):  
A. M. Maharramov ◽  
M. R. Bayramov ◽  
Y. Kh. Shakhverdiev ◽  
I. G. Mamedov ◽  
Z. M. Javadova ◽  
...  
2016 ◽  
Vol 5 (3) ◽  
pp. 38-43
Author(s):  
Windi Monica Surbakti ◽  
Gerson Rico M.H ◽  
Mersi Suriani Sinaga

Glycerol as a byproduct of biodiesel production was approximately formed 10% of the biodiesel weight. Impurities which contained in the glycerol such as catalyst, soap, methanol, water, salt, and matter organic non glycerol (MONG) have a significant effect on the glycerol concentration. So, it is necessary to treat the impurities. The purpose of this study is to know the effect of chloroform to glycerol purification process with acidification method using hydrochloric acid as pretreatment process. This research was begun with acid addition to the glycerol to neutralize the base content and to split the soap content into free fatty acid and salt, that are more easily separated from glycerol. Then the process was continued with extraction by the solvent chloroform using the variable of test volume ratio (v/v) (1:1, 1:1.5, 1:2)  and the extraction time (20, 40, and 60 minutes). The results showed that the more volume of solvent used, gave less extraction time to produce high purity of glycerol. The highest purity produced in this study amounted to 90,9082% is obtained at the ratio of the volume solvent (v/v) 1:1 with extraction time 60 minutes.


1998 ◽  
Vol 34 (6) ◽  
pp. 28-35
Author(s):  
V. I. Lavrik ◽  
A. N. Bilyk ◽  
N. A. Nikiforovich

Author(s):  
Ya. G. Avdeev ◽  
◽  
D.S. Kuznetsov ◽  
Yu.I. Kuznetsov ◽  
◽  
...  

Author(s):  
A.M. Semiletov ◽  
◽  
Yu.B. Makarychev ◽  
A.A. Chirkunov ◽  
L.P. Kazansky ◽  
...  

The application of mixed corrosion inhibitor (CI), which is an equimolar composition of oleoyl sarcosinate (SOS) and sodium flufenamate (SFF), for protection of D16 aluminum alloy from atmospheric corrosion has been studied. The polarization measurements used to assess the effectiveness of preliminary passivation of the alloy with solutions of SOS, SFF and their composition showed significant advantages of mixed CI. The XPS method was used to study features of CI adsorption on the surface of D16 alloy. It has been established that upon adsorption of SOS and SFF separately a monolayer is formed, firmly bonded to the alloy surface, thickness of which is not exceeding 2.6—3.2 nm. After the joint adsorption of these CI, the layer thickness reaches 12—20 nm. The composition of this layer includes a considerable amount of Al3+ ions (~20%) related to their compounds with SFF and SOS, as well as to aluminum hydroxides. A possible mechanism for the formation of such a protective layer is proposed. The results of corrosion tests in a humid atmosphere with daily water condensation on samples of D16 alloy confirmed the high protective ability of the mixed CI film.


2017 ◽  
Vol 54 (6) ◽  
pp. 467-478
Author(s):  
Tiantian Wang ◽  
Yuming Zhou ◽  
Qingzhao Yao ◽  
Ao Zhang ◽  
Jun Li ◽  
...  

2019 ◽  
Vol 24 (2) ◽  
pp. 52-58
Author(s):  
N.Sh. Rzaeva ◽  
V.M. Abbasov ◽  
L.I. Aliyeva ◽  
L.I. Nasibova

Sign in / Sign up

Export Citation Format

Share Document