Injection d'ancrages à base de ciment Portland dans l'arctique

1987 ◽  
Vol 14 (5) ◽  
pp. 690-693 ◽  
Author(s):  
Brahim Benmokrane ◽  
Pierre-Claude Aïtcin ◽  
Gérard Ballivy

During summer, it is possible to inject Portland cement grout in the Arctic because there is a layer of unfrozen rock surface which is approximately 2 m deep. During the month of August, the temperature of the unfrozen rock layer reaches +5 °C at a depth of 1 m, which allows the Portland cement to harden in good conditions and to acquire its full strength.After 7 days, the mean shear strength to failure at the rod–group contact, determined when the anchorages were pulled out, was 10 MPa. After 1 year, this strength was close to 20 MPa. These results are similar to those recorded in Sherbrooke for the same grout formulas. Key words: anchorage, cement grout, rock, Arctic, tearing off. [Journal translation]

2003 ◽  
Vol 25 (7) ◽  
pp. 729-735 ◽  
Author(s):  
Mahdi Moosavi ◽  
William F. Bawden

2011 ◽  
pp. 52-59
Author(s):  
Binh Bao Son Bui

Objective and methods: a prospective questionnaire based study on 71 parents (caretakers) of consecutive children treated at the Pediatric Department, Hue Central Hospital and on 47 health professionals at the department was conducted from September until December 2009 to investigate the knowledge, attitude and practices of the caretakers, nurses and postgraduated doctors toward teething in infants. Results: Most responders believed that teething causes fever, irritability, feeding problems, drooling, biting, sleep disturbance, swollen gums, crying, lose of appetite for solids; and fever over 38oC was also believed to be associated with teething. The mean eruption time of the first tooth was from 6 months. Most caretakers had normal attitude to manifestations ascribed to teething (54.9%). The most common management to symptoms attributed to teething included increased breast-feeding, oral paracetamol, increased fluid supplying and physician consulting. Conclusion: Correct knowledge to teething in infants need to be educated for parents (caretakers) and even for health professionals. Key words: knowledge, attitude, practices, teething, infants.


2015 ◽  
pp. 29-34
Author(s):  
Van Nam Phan ◽  
Ba Kien Tran

Purpose: To determine the clinical characteristics of the chronic dacryocystitis and the success rate of external dacryocystorhinostomy. Methods: The retrospective, interventional study without comparing on 27 patients (32 eyes) of chronic dacryocystitis who underwent dacryocystorhinostomy (DCR) from 2010 to 2011. Results were evaluated with standards: epiphora, purelence, lacrimal duct irrigation. Results: Over period of 6 months, 27 patients including 25 (92.59%) female, 2 (7.41%) male. The mean age was 49.8 years (range, 22-79 years). All patients demonstrated epiphera (range, 3 months – 11 years). Dacryocystorhinostomy was performed unilaterally in 81.48%, bilateral 18.52%. Successrate was 90.06% overall. Conclusions: Although techniques in dacryocystorhinostomy of DUPUY-DUTEMPS is old, its result is mainstay of treatment for chronic dacryocystitis in Vietnam. Key words: Dupuy-Dutemps, chronic dacryocystitis


2011 ◽  
pp. 100-104
Author(s):  
Thi Thu Nguyen ◽  
Viet Hien Vo ◽  
Thi Em Do

The study use intralesional triamcinolone acetonide injection proceduce for chalazion treatment.1. Objectives: To evaluate results of intralesional triamcinolone acetonide injection for chalazion treatment. 2. Method: This noncomparative prospective interventional trial included 72 chalazions of 61 patients. 3. Results: 61 patients (72 chalazions) with 19 males (31.1%) và 42 females (68.9%), the mean age was 24 ± 9,78 years. 31.1% patients was the first time chalazion and 68.9% patients was more than one times chalazion including 78.6% patients was recurrent at the first position and 21.4% patients occur at new position. 72 chalazions with 16 (22.2%) chalazions was treated before and 56 (77.8%) chalazions wasn’t done that. 72 chalazions with 49 chalazions (68.1%) are local in upper eyelid and 23 chalazions (31.9%) are local in lower eyelid. The mean of chalazion diameter is 6.99 ± 3.03mm. Intralesional triamcinolone acetonide is injected to treat 72 chalazions with 16 (22.2%) chalazions are injected through the route of skin and 56 (77.8%) chalazions are injected through the route of conjunctiva. After 2 weeks follow-up, the success rate was 93.1% and 6.9% failed. 4. Conclusion: intralesional triamcinolone acetonide injection for chalazion treatment is really effective. Key words: chalazion, intralesional triamcinolone acetonide.


1970 ◽  
Vol 6 (1) ◽  
pp. 45-51 ◽  
Author(s):  
T Farjana ◽  
KR Islam ◽  
MMH Mondal

 A study was conducted to investigate the population density of helminth parasites in domestic ducks (Anas boschas domesticus) in relation to host's age, sex, breed and seasons of the year from March 2002 to May 2003. A total of 300 ducks were collected from different villages of Netrokona and Mymensingh districts of Bangladesh and autopsied to collect the parasites and counted to determine the population density of parasites. Off 300 ducks examined, 290 (96.66%) were infected with 17 species of helminth parasites in which 11 species were trematodes, 4 were cestodes and 2 nematodes. Among the parasites, density of cestodes was the highest (33.15±5.26), followed by trematodes (5.98±1.32); and nematodes (2.95±0.68). Mean density of parasites increased with the increase of age (young: 21.23±1.09, adult: 26.18±2.14 and old: 27.87±2.98) while the mean density of most of the helminth parasites was higher in female ducks (31.35±4.72) than in males (27.52±3.32). Indigenous ducks (33.72±3.61) were infected with the highest load of helminths than Khaki Campbell breed (29.61±4.32) of ducks. Mean density of most trematodes (5.42±0.80) were highest in winter season whereas mean density of all cestodes (48.43±4.85) and nematodes (4.13±1.76) were highest in summer.  The present study suggests that age, sex, breed of ducks and seasons of the year influence the parasitic infection to a greater extend. Key words: Population density, helminths, duck, Bangladesh DOI = 10.3329/bjvm.v6i1.1338 Bangl. J. Vet. Med. (2008). 6 (1): 45-51


2019 ◽  
Vol 276 ◽  
pp. 05009
Author(s):  
Alatas Idrus M ◽  
Simatupang Pintor T ◽  
Kuswaya Wawan ◽  
Panji

Clay shale is a claystone which in fresh condition has a very high shear strength. When it reacts with the atmosphere or hydrosphere it will weather so that the shear strength of clay shale will drop drastically. The weathering potential of clay shale is generally done by the slake durability test and the weathering process is measured by disintegration ratio test (DR). The strength of clay shale that has fully weathered will increase again when it is stabilized with a minimum of 6% PC (Portland Cement). It was found from the wetting drying cycle process testing that durability of re-weathering of stabilized clay shale with PC is increased compared to natural clay shale. Disintegration ratio of natural clay shale DR was smaller than stabilized clay shale with 6% PC. Additionally, more than 6% PC increased the durability of re-weathering of clay shale.


2017 ◽  
Vol 5 (9) ◽  
Author(s):  
M. H. Badii ◽  
J. Castillo ◽  
A. Guillen

Key words: Bias, estimation, population, sampleAbstract. The basics of sample size estimation process are described. Assuming the normal distribution, the procedures for estimation of sample size for the mean; with and without knowledge of the population variance, and population proportion are noted. Sample size for more than one population feature is also given.Palabras clave: Estimación, muestra, población, sesgoResumen. Se describen los fundamentos del proceso de la estimación del tamaño óptimo de la muestra. Suponiendo una distribución normal para una población, se notan los procedimientos de la estimación del tamaño óptimo de la muestra para la media muestral con y sin el conocimiento de la varianza poblacional. Se presenta el tamaño óptimo de la muestra con más de una característica poblacional.


2021 ◽  
Author(s):  
Tyler Wizenberg ◽  
Kimberly Strong ◽  
Kaley Walker ◽  
Erik Lutsch ◽  
Tobias Borsdorff ◽  
...  

Abstract. ACE/TROPOMI Abstract for AMT submission The TROPOspheric Monitoring Instrument (TROPOMI) provides a daily, spatially-resolved (initially 7 × 7 km2, upgraded to 7 × 5.6 km2 in August 2019) global data set of CO columns, however, due to the relative sparseness of reliable ground-based data sources, it can be challenging to characterize the validity and accuracy of satellite data products in remote regions such as the high Arctic. In these regions, satellite inter-comparisons can supplement model- and ground-based validation efforts and serve to verify previously observed differences. In this paper, we compare the CO products from TROPOMI, the Atmospheric Chemistry Experiment (ACE) Fourier Transform Spectrometer (FTS), and a high-Arctic ground-based FTS located at the Polar Environment Atmospheric Research Laboratory (PEARL) in Eureka, Nunavut (80.05° N, 86.42° W). A global comparison of TROPOMI reference profiles scaled by the retrieved total column with ACE-FTS CO partial columns for the period from 10 November 2017 to 31 May 2020 displays excellent agreement between the two data sets (R = 0.93), and a small relative bias of −0.68 ± 0.25 % (bias ± standard error). Additional comparisons were performed within five latitude bands; the north Polar region (60° N to 90° N), northern Mid-latitudes (20° N to 60° N), the Equatorial region (20° S to 20° N), southern Mid-latitudes (60° S to 20° S), and the south Polar region (90° S to 60° S). Latitudinal comparisons of the TROPOMI and ACE-FTS CO datasets show strong correlations ranging from R = 0.93 (southern Mid-latitudes) to R = 0.85 (Equatorial region) between the CO products, but display a dependence of the mean differences on latitude. Positive mean biases of 7.92 ± 0.58 % and 7.98 ± 0.51 % were found in the northern and southern Polar regions, respectively, while a negative bias of −9.16 ± 0.55 % was observed in the Equatorial region. To investigate whether these differences are introduced by cloud contamination which is reflected in the TROPOMI averaging kernel shape, the latitudinal comparisons were repeated for cloud-covered pixels and clear-sky pixels only, and for the unsmoothed and smoothed cases. Clear-sky pixels were found to be biased higher with poorer correlations on average than clear+cloudy scenes and cloud-covered scenes only. Furthermore, the latitudinal dependence on the biases was observed in both the smoothed and unsmoothed cases. To provide additional context to the global comparisons of TROPOMI with ACE-FTS in the Arctic, both satellite data sets were compared against measurements from the ground-based PEARL-FTS. Comparisons of TROPOMI with smoothed PEARL-FTS total columns in the period of 3 March 2018 to 27 March 2020 display a strong correlation (R = 0.88), however a positive mean bias of 14.3 ± 0.16 % was also found. A partial column comparison of ACE-FTS with the PEARL-FTS in the period from 25 February 2007 to 18 March 2020 shows good agreement (R = 0.82), and a mean positive bias of 9.83 ± 0.22 % in the ACE-FTS product relative to the ground-based FTS. The magnitude and sign of the mean relative differences are consistent across all inter-comparisons in this work, as well as with recent ground-based validation efforts, suggesting that current TROPOMI CO product exhibits a positive bias in the high-Arctic region. However, the observed bias is within the TROPOMI mission accuracy requirement of ±15 %, providing further confirmation that the data quality in these remote high-latitude regions meets this specification.


Author(s):  
F. Kiptach

The level of material well-being of population of cities of regional value and administrative districts of the Lviv area is calculated by forest resources. Their classification is conducted on the rating values of indexes of index of provision of forest resources from a calculation to the mean values for cities and districts. Key words: forest resources, populations, cities of regional value, administrative districts.


2021 ◽  
Vol 72 ◽  
pp. 215-222
Author(s):  
Mohanad R.A. Al-Owaidi ◽  
◽  
Mohammed L. Hussein ◽  
Ruaa Issa Muslim ◽  
◽  
...  

The Portland cement industry is one of the strategic industries in any country. The basis of an industry success is the availability of raw materials and, the low extraction in addition to transportation costs. The Bahr Al-Najaf region is abundant with limestone rocks but lacks primary gypsum. An investigation had been carried out to identify the source of secondary gypsum as an alternative to primary gypsum. Twelve boreholes were drilled for a depth of 2 m, as the thickness of suitable secondary gypsum layer ranges from 1 to 1.5 m. The mineralogical study revealed the predominance of gypsum followed by quartz and calcite, with an average of 62.9%, 19.6% and 14.35%, respectively. The geochemical analysis revealed that the content of SO3 is appropriate and ranging from 41.92% to 32.89% with an average of 37.73%. The SO3 content is within an acceptable range. The mean abundance of the major oxides of the study area may be arranged as SO3 > CaO> SiO2> MgO> Al2O> Fe2O3. The insoluble residue was at an acceptable rate. The laboratory experiments for milling secondary gypsum with clinker has successfully proven the production of Portland cement that matches the limits of the Iraqi Quality Standard (IQS) No. 5 of 1984. Great care must be taken when using secondary gypsum; secondary gypsum must be mixed well to maintain the chemical properties before blending with clinker and utilizing in the cement mill in the cement plant.


Sign in / Sign up

Export Citation Format

Share Document