Catalytic pathways in the ethanolysis of fenitrothion, an organophosphorothioate pesticide. A dichotomy in the behaviour of crown/cryptand cation complexing agents

2001 ◽  
Vol 79 (2) ◽  
pp. 157-173 ◽  
Author(s):  
Vimal K Balakrishnan ◽  
Julian M Dust ◽  
Gary W vanLoon ◽  
Erwin Buncel

The rates of displacement of 3-methyl-4-nitrophenoxide ion from the pesticide, fenitrothion, by alkali metal ethoxides in anhydrous ethanol were followed spectrophotometrically. Through product analysis experiments, which included 31P NMR and GC-MS, as well as spectrophotometric analysis, three reaction pathways were identified: nucleophilic attack at the phosphorus centre, attack at the aliphatic carbon, and a minor SNAr route ([Formula: see text]7%). Furthermore, a consecutive process was found to occur on the product of attack at the phosphorus centre. For purposes of kinetic treatment, the processes at the aliphatic and aromatic carbon were combined (i.e., the minor SNAr pathway was neglected), and the observed reaction rate constants were dissected into rate coefficients for nucleophilic attack at phosphorus and at aliphatic carbon. Attack at phosphorus was found to be catalyzed by the alkali metal ethoxides in the order KOEt > NaOEt > LiOEt. Catalysis arises from alkali metal ethoxide aggregates in the base solutions used (0–1.8 M); treatment of the system as a mixture of free ethoxide, ion-paired metal ethoxide, and metal ethoxide dimers resulted in a good fit with the kinetic data. An unexpected dichotomy in the kinetic behaviour of complexing agents (e.g., DC-18-crown-6, [2.2.2]cryptand) indicated that the dimers are more reactive than free ethoxide anions, which are in turn more reactive than ion-paired metal ethoxide. The observed relative order of reactivity is explained in the context of the Eisenman theory in which the free energy of association of the metal ion with the rate-determining transition state is largely determined by the solvent reorganization parameter. In contrast with displacement at the phosphorus centre, attack at the aliphatic carbon was not found to be catalyzed by alkali metals. In this case, the free ethoxide anion was more reactive than either the ion-paired metal ethoxide or the dimeric aggregate. The differing effects of alkali metals on the two pathways is ascribed largely to the leaving group pKa. For carbon attack, the pKa value estimated for demethyl fenitrothion, 2.15, is sufficiently low that metal ions are not required to stabilize the rate-determining transition state. In contrast, for phosphorus attack, 3-methyl-4-nitrophenoxide, with a pKa of 7.15, requires stabilization by metal ion interactions. Hence, alkali metal ions catalyze attack at phosphorus, but not attack at the carbon centres.Key words: organophosphorothioate, pesticide, fenitrothion, ethanolysis, alkali metal ethoxide, ion-pair reactivity, dimers, catalysis, competitive pathways.

1990 ◽  
Vol 68 (10) ◽  
pp. 1837-1845 ◽  
Author(s):  
Edward J. Dunn ◽  
Robert Y. Moir ◽  
Erwin Buncel ◽  
J. Garfield Purdon ◽  
Robert A. B. Bannard

The reactions of p-nitrophenyl diphenylphosphinate (1) with lithium, sodium, potassium, and benzyltrimethylammonium phenoxides (BTMAOPh) have been studied by spectrophotometric techniques in anhydrous ethanol at 25 °C. The reactivity (kobs) of the alkali metal phenoxides increases in the order BTMAOPh < KOPh < NaOPh < LiOPh. The rate of reaction of 1 with LiOPh is enhanced when lithium salts (LiSCN, LiNO3, LiClO4, LiOAc) are added to the reaction media. The addition of the alkali metal complexing agents dicyclohexyl-18-crown-6 ether or [2.2.2]cryptand for Na+, and [2.1.1]cryptand for Li+, to each of the alkali metal phenoxide reactions resulted in a decrease in rate, indicating catalysis by the alkali metal ions. The kinetic data are analyzed to obtain specific rate coefficients of reactions of phenoxide and ethoxide as the dissociated ions and as alkali metal – phenoxide ion pairs. Reactivities follow the order [Formula: see text]; [Formula: see text]; [Formula: see text]; [Formula: see text]. A mechanism is proposed in which the ion-paired metal phenoxide is more reactive towards the substrate than is the dissociated phenoxide. Analysis of the data in terms of initial state and transition state interactions with metal ions indicates that the increased reactivity of the ion-paired species results from greater stabilization of the negatively charged transition state relative to stabilization of the ion-paired nucleophile. Keywords: nucleophilic displacement at phosphorus by phenoxide, alkali-metal-ion catalysis.


1989 ◽  
Vol 67 (9) ◽  
pp. 1440-1448 ◽  
Author(s):  
Edward J. Dunn ◽  
Erwin Buncel

The effect of macrocyclic crown ether and cryptand complexing agents on the rate of the nucleophilic displacement reaction of p-nitrophenyl diphenylphosphinate by alkali metal ethoxides in ethanol at 25 °C has been studied by spectrophotometric techniques. For the reactions of potassium ethoxide, sodium ethoxide, and lithium ethoxide, the observed rate constant increased in the order KOEt < NaOEt < LiOEt. Crown ether and cryptand cation-complexing agents have a retarding effect on the rate. Increasing the ratio of complexing agent to base results in a decrease in kobs to a minimum value corresponding to the rate of reaction of free ethoxide ion. In complementary experiments, alkali metal ions were added to these reaction systems in the form of unreactive salts, causing an increase in reaction rate. The kinetic data were analysed in terms of ion-pairing treatments, which allowed evaluation of rate coefficients due to free ethoxide ions and metal ion – ethoxide ion pairs. Possible roles of the metal cations are discussed in terms of ground state and transition state stabilization. Evaluation of the equilibrium constants for association of the metal ion with ground state (Ka) and the transition state (K′a) shows that catalysis occurs as a result of enhanced association between the metal ion and the transition state, with (K′a) values increasing in the order K+ < Na+ < Li+. A model is proposed in which transition state stabilization arises largely from chelation of the solvated metal ion to two charged oxygen centers. This appears to be the first reported instance of catalysis by alkali metal cations in nucleophilic displacement at phosphoryl centers. Keywords: nucleophilic displacement at phosphorus, alkali-metal-ion catalysis.


2003 ◽  
Vol 81 (1) ◽  
pp. 53-63 ◽  
Author(s):  
Erwin Buncel ◽  
Ruby Nagelkerke ◽  
Gregory RJ Thatcher

In continuation of our studies of alkali metal ion catalysis and inhibition at carbon, phosphorus, and sulfur centers, the role of alkali metal ions in nucleophilic displacement reactions of p-nitrophenyl phenylphosphonate (PNPP) has been examined. All alkali metal ions studied acted as catalysts. Alkali metal ions added as inert salts increased the rate while decreased rate resulted on M+ complexation with 18-crown-6 ether. Kinetic analysis indicated the interaction of possibly three potassium ions, four sodium ions, and five lithium ions in the transition state of the reactions of ethoxide with PNPP. Pre-association of the anionic substrate with two metals ions in the ground state gave the best fit to the experimental data of the sodium system. Thus, the study gives evidence of the role of several metal ions in nucleophilic displacement reactions of ethoxide with anionic PNPP, both in the ground state and in the transition state. Molecular modeling of the anionic transition state implies that the size of the monovalent cation and the steric requirement of the pentacoordinate transition state are the primary limitations on the number of cations that can be brought to bear to stabilize the transition state and catalyze nucleophilic substitution at phosphorus. The bearing of the present work on metal ion catalysis in enzyme systems is discussed, in particular enzymes that catalyze phosphoryl transfer, which often employ multiple metal ions. Our results, both kinetic and modeling, reveal the importance of electrostatic stabilization of the transition state for phosphoryl transfer that may be effected by multiple cations, either monovalent metal ions or amino acid residues. The more such cations can be brought into contact with the anionic transition state, the greater the catalysis observed.Key words: alkali metal ion catalysis, nucleophilic displacement at phosphorus, multiple metal ion catalysis, phosphoryl transfer.


1990 ◽  
Vol 68 (10) ◽  
pp. 1846-1858 ◽  
Author(s):  
Marko J. Pregel ◽  
Edward J. Dunn ◽  
Erwin Buncel

The rate of the nucleophilic displacement reaction of p-nitrophenyl benzenesulfonate (1) with alkali metal ethoxides in ethanol at 25 °C has been studied by spectrophotometric techniques. For lithium ethoxide, sodium ethoxide, potassium ethoxide, and cesium ethoxide, the observed rate constants increase in the order LiOEt < NaOEt < CsOEt < KOEt. The effect of added crown ether and cryptand complexing agents was also investigated. Addition of complexing agent to the reaction of KOEt results in the rate decreasing to a minimum value corresponding to the reaction of free ethoxide. Conversely, addition of complexing agent to the reaction of LiOEt results in the rate increasing to a maximum value that is identical to the minimum value seen in the reaction of KOEt in the presence of excess complexing agent. In complementary experiments, alkali metal ions were added in the form of unreactive salts. Addition of a K+ salt to the reaction of KOEt increases the reaction rate, while addition of a Li+ salt to the reaction of LiOEt decreases the rate. The involvement of metal ions in the reaction of 1 is proposed to occur via reactive alkali metal – ethoxide ion pairs. The kinetic data are analyzed in terms of an ion pairing treatment that allows the calculation of second-order rate constants for free ethoxide and metal–ethoxide ion pairs; the rate constants increase in the order LiOEt < EtO−< NaOEt < CsOEt < KOEt. Thus, Li+isaninhibitorofthereactionofethoxidewith1, whiletheothermetalsionsstudiedareallcatalysts. Equilibrium constants for the association of the various metal ions with the transition state are calculated using a thermodynamic cycle, and are compared to association constants in the ground state. Consistent with the observed kinetic results, Li+ is found to stabilize the ground state more than the transition state, while Na+, K+, and Cs+ all stabilize the transition state more than the ground state. The trend in the magnitude of the transition state stabilization is interpreted in terms of interactions of the transition state with bare or solvated metal ions. It is concluded that the transition state for the reaction of 1 with ethoxide forms solvent separated ion pairs with alkali metal ions. Analogous data were available for the reaction of p-nitrophenyl diphenylphosphinate (2) with ethoxides, where Li+, Na+, K+, and Cs+ all function as catalysts, and the results are analyzed as above. In contrast to the sulfonate system, it is proposed that the phosphinate transition state forms contact ion pairs with alkali metal ions. The difference is attributed to a greater localization of negative charge in the phosphinate transition state, leading to stronger interactions with metal ions, which overcome metal ion – solvent interactions. Keywords: nucleophilic substitution at sulfur, alkali metal ion catalysis.


1981 ◽  
Vol 59 (12) ◽  
pp. 1734-1744 ◽  
Author(s):  
Thomas M. Fyles ◽  
Virginia A. Malik-Diemer ◽  
Dennis M. Whitfield

An artificial membrane system based on a series of macrocyclic polyether carriers (crown ethers) is described. Under the influence of a proton gradient the carriers move alkali metal ions from basic to acidic solution through a chloroform membrane phase. Transport occurs against the concentration gradient of the transported ion as a result of a coupled counterflow of protons. Different transport behaviors are observed depending upon the metal ion concentration. At high metal ion concentration the amount transported is a linear function of time; at lower metal ion concentration the amount transported is a complex function of time which may be described as the result of a pair of consecutive first order processes. Effects of metal ion, carrier, and proton concentration on transport rate are considered. The rate increases with increasing metal ion or carrier concentration but is essentially independent of the pH of either aqueous phase. Increased lipophilicity of the carrier also results in a rate increase. Carriers derived from 18-crown-6 transport potassium selectively and all ions more rapidly than 15-crown-5 derivatives which are, however, selective for sodium. The overall efficiency of the system is discussed in terms of competing "leak" reactions, either of cations from the basic phase or of anions from the acidic phase.


1989 ◽  
Vol 67 (11) ◽  
pp. 1708-1710 ◽  
Author(s):  
Zaihui Zhang ◽  
T. L. Thomas Hui ◽  
Chris Orvig

A series of tris(3-hydroxy-2-methyl-4-pyridinonato)metal(III) and tris(3-hydroxy-6-hydroxymethyl-4-pyridinonato)metal(III) complexes have been prepared in water by one-pot synthesis directly from maltol and kojic acid, respectively, and the metal ion (M = Al, Ga, In) with an appropriate amine. The pyridinones have substituents at the ring nitrogen atom (CH3, C2H5). The tris(3-hydroxy-4-pyronato)metal(III) complexes are formed insitu and these undergo nucleophilic attack by the primary amine; the appropriate tris(3-hydroxy-4-pyridinonato)metal(III) complexes are obtained. This method bypasses the sequential syntheses of ligand and metal complex, and has improved the yields of the tris(ligand)metal complexes, in particular by making them much more easily accessible. The electronic effects of binding the pyrone to the metal ions and of the substituents on the pyrone ring on the reactivity are discussed. Keywords: 3-hydroxy-4 pyridinone complexes, group 13 metal ions, one-pot synthesis.


2016 ◽  
Vol 18 (10) ◽  
pp. 7269-7277 ◽  
Author(s):  
Juehan Gao ◽  
Giel Berden ◽  
M. T. Rodgers ◽  
Jos Oomens

Dimeric metal ion complexes of cytosine C–M+–C display divergent coordination motifs for coinage versus alkali metal ions.


Sign in / Sign up

Export Citation Format

Share Document