COMPARISON BETWEEN PIXE AND XRF FOR OLD JAPANESE COPPER COIN ANALYSIS

1999 ◽  
Vol 09 (03n04) ◽  
pp. 181-188 ◽  
Author(s):  
YOICHI HARUYAMA ◽  
MANABU SAITO ◽  
TAKAHIRO MUNEDA ◽  
MASAKI MITANI ◽  
RIE YAMAMOTO ◽  
...  
Keyword(s):  
Uniform Distribution ◽  
Elemental Concentration ◽  
Two Dimensional ◽  
Minor Components ◽  
Edo Period ◽  
Old Japanese ◽  
Copper Coin ◽  
Place Identification ◽  
Main Components ◽  
Made In

We have measured elemental concentration of old Japanese copper coins made in the Edo period (1600-1860) by PIXE and XRF to study the availability of elemental concentration analysis for production place identification of copper-based archaeological alloys. We also aimed to compare the effectiveness of these two methods for this purpose. We used 2.5 MeV proton beam for PIXE measurement. For XRF measurement we operated a XRF equipment with rhodium target at 50 kV Since elemental uniformity is indispensable for concentration analysis, we also measured the elemental distributions by SEM at 25 kV. Two dimensional images obtained by SEM showed nearly uniform distribution for iron, tin and antimony but not for lead. Besides of main components, copper and lead, many minor components were measured by PIXE and XRF. The relative concentrations of arsenic, silver, antimony and tin showed clear difference by the place the coins were made.

Spectrophotometric measurements of objective-prism spectra

1966 ◽  
Vol 24 ◽  
pp. 118-119
Author(s):  
Th. Schmidt-Kaler
Keyword(s):  
Progress Report ◽  
Two Dimensional ◽  
Objective Prism ◽  
Made In

I should like to give you a very condensed progress report on some spectrophotometric measurements of objective-prism spectra made in collaboration with H. Leicher at Bonn. The procedure used is almost completely automatic. The measurements are made with the help of a semi-automatic fully digitized registering microphotometer constructed by Hög-Hamburg. The reductions are carried out with the aid of a number of interconnected programmes written for the computer IBM 7090, beginning with the output of the photometer in the form of punched cards and ending with the printing-out of the final two-dimensional classifications.

Wrist strength limitations to manual exertion capability

1998 ◽  
Vol 1 (2) ◽  
pp. 107-121
Author(s):  
Khaled W. Al-Eisawi ◽  
Carter J. Kerk ◽  
Jerome J. Congleton
Keyword(s):  
Biomechanical Modeling ◽  
Two Dimensional ◽  
Wrist Flexion ◽  
College Age ◽  
Biomechanical Models ◽  
Radial Deviation ◽  
Flexion Strength ◽  
Made In

This study evaluated wrist strength limitations to manual exertion capability in two-dimensional static biomechanical modeling. The researchers hypothesized that wrist strength does not limit manual exertion capability - an assumption commonly made in many strength biomechanical models. An experiment was conducted on 15 right-handed males of college age. Isometric wrist flexion strength was measured at two elbow angles: 90 degree and 135 degree and in two wrist positions: neutral and 45 degree extended. Isometric wrist radial deviation strength was measured at the same two elbow angles and in two wrist positions: neutral and 30 degree ulnarly deviated. Minimum wrist strength limits for which wrist strength does not limit maximal moments about the elbow in manual hand exertions were calculated and compared to their corresponding measured wrist strength moments using paired t-tests. In general, wrist strength was non-limiting. However, wrist flexion strength in the 45 degree extended wrist posture was limiting. Weak-wrist subjects showed more wrist strength limitations than strong-wrist subjects.

scholarly journals Determination of Environmental Factors for the Implementation of the Exploitability Index in Industrial Aggregate Mining Using Multi-Criteria Analysis

2021 ◽  
Vol 10 (4) ◽  
pp. 196
Author(s):  
Julio Manuel de Luis-Ruiz ◽  
Benito Ramiro Salas-Menocal ◽  
Gema Fernández-Maroto ◽  
Rubén Pérez-Álvarez ◽  
Raúl Pereda-García
Keyword(s):  
Environmental Factors ◽  
Environmental Factor ◽  
Human Life ◽  
Accurate Estimation ◽  
Analytic Hierarchy ◽  
Main Components ◽  
Hierarchy Process ◽  
Made In

The quality of human life is linked to the exploitation of mining resources. The Exploitability Index (EI) assesses the actual possibilities to enable a mine according to several factors. The environment is one of the most constraining ones, but its analysis is made in a shallow way. This research is focused on its determination, according to a new preliminary methodology that sets the main components of the environmental impact related to the development of an exploitation of industrial minerals and its weighting according to the Analytic Hierarchy Process (AHP). It is applied to the case of the ophitic outcrops in Cantabria (Spain). Twelve components are proposed and weighted with the AHP and an algorithm that allows for assigning a normalized value for the environmental factor to each deposit. Geographic Information Systems (GISs) are applied, allowing us to map a large number of components of the environmental factors. This provides a much more accurate estimation of the environmental factor, with respect to reality, and improves the traditional methodology in a substantial way. It can be established as a methodology for mining spaces planning, but it is suitable for other contexts, and it raises developing the environmental analysis before selecting the outcrop to be exploited.

scholarly journals Study of the industrial contaminations containing hydrocarbon components and their effect on correlation of protective properties of textiles for clothes

2018 ◽  
Vol 226 ◽  
pp. 02027
Author(s):  
Irina Cherunova ◽  
Elena Yakovleva ◽  
Ekaterina Stefanova
Keyword(s):  
Ministry Of Education ◽  
State Technical ◽  
Potential Influence ◽  
Saturated Hydrocarbons ◽  
Protective Properties ◽  
Textile Materials ◽  
Wet Processing ◽  
Main Components ◽  
High Level ◽  
Made In

The article represents trends and results of world investigations for safety of textile materials for humans and environment. The algorithm for identification of potential influence vector of chemical emissions from textile and the environmentally aimed methods based on the alternative chemical substances for textile wet processing were presented. Using the procedure for oleophobic effect determination, the oil resistance levels of a number of modern fabrics for clothes were established. The experimental research results of the oil products concentration in the textile materials after chemical treatment based on the method of the capillary gas chromatography were presented. It was found out that hydrocarbons from C14H30 Tetradecane to С36Н74 Hexatriacontane are the main components with high level of contaminants concentration. The average values of hydrocarbon concentration on the cleaned up samples for the main areas of the clothe surface were determined. Accumulation of residual contaminations, based on saturated hydrocarbons (С17Н36 – С25Н52 block) and related special-purpose clothes areas, was identified. Recommendations for target-oriented correlation of the clothes protective properties were proposed. UWO (unified work order). The research was made in Don State Technical University within the framework of State Assignment of the Ministry of education and science of Russia under the project 11.9194.2017/BCh.

The response of a turbulent boundary layer to lateral divergence

1979 ◽  
Vol 94 (2) ◽  
pp. 243-268 ◽  
Author(s):  
A. J. Smits ◽  
J. A. Eaton ◽  
P. Bradshaw
Keyword(s):  
Boundary Layer ◽  
Circular Cylinder ◽  
Turbulent Boundary Layer ◽  
Structural Parameters ◽  
Axial Flow ◽  
Turbulence Structure ◽  
Two Dimensional ◽  
Transition Section ◽  
Two Dimensional Flow ◽  
Made In

Measurements have been made in the flow over an axisymmetric cylinder-flare body, in which the boundary layer developed in axial flow over a circular cylinder before diverging over a conical flare. The lateral divergence, and the concave curvature in the transition section between the cylinder and the flare, both tend to destabilize the turbulence. Well downstream of the transition section, the changes in turbulence structure are still significant and can be attributed to lateral divergence alone. The results confirm that lateral divergence alters the structural parameters in much the same way as longitudinal curvature, and can be allowed for by similar empirical formulae. The interaction between curvature and divergence effects in the transition section leads to qualitative differences between the behaviour of the present flow, in which the turbulence intensity is increased everywhere, and the results of Smits, Young & Bradshaw (1979) for a two-dimensional flow with the same curvature but no divergence, in which an unexpected collapse of the turbulence occurred downstream of the curved region.

Uniform Distribution of the Weighted Sum-of-Digits Functions

2021 ◽  
Vol 16 (1) ◽  
pp. 93-126
Author(s):  
Ladislav Mišík ◽  
Štefan Porubský ◽  
Oto Strauch
Keyword(s):  
Uniform Distribution ◽  
Weighted Sum ◽  
Two Dimensional ◽  
Sum Of Digits ◽  
Higher Dimensional ◽  
Distribution Modulo One ◽  
Sum Of Digits Function ◽  
Uniform Distribution Modulo One ◽  
Van Der Corput Sequence ◽  
Distribution Modulo

Abstract The higher-dimensional generalization of the weighted q-adic sum-of-digits functions sq,γ (n), n =0, 1, 2,..., covers several important cases of sequences investigated in the theory of uniformly distributed sequences, e.g., d-dimensional van der Corput-Halton or d-dimensional Kronecker sequences. We prove a necessary and sufficient condition for the higher-dimensional weighted q-adic sum-of-digits functions to be uniformly distributed modulo one in terms of a trigonometric product. As applications of our condition we prove some upper estimates of the extreme discrepancies of such sequences, and that the existence of distribution function g(x)= x implies the uniform distribution modulo one of the weighted q-adic sum-of-digits function sq,γ (n), n = 0, 1, 2,... We also prove the uniform distribution modulo one of related sequences h 1 sq, γ (n)+h 2 sq,γ (n +1), where h 1 and h 2 are integers such that h 1 + h 2 ≠ 0 and that the akin two-dimensional sequence sq,γ (n), sq,γ (n +1) cannot be uniformly distributed modulo one if q ≥ 3. The properties of the two-dimensional sequence sq,γ (n),s q,γ (n +1), n =0, 1, 2,..., will be instrumental in the proofs of the final section, where we show how the growth properties of the sequence of weights influence the distribution of values of the weighted sum-of-digits function which in turn imply a new property of the van der Corput sequence.

scholarly journals Use of palmae wax hydrocarbon fractions as chemotaxonomical markers in Butia and Syagrus

2009 ◽  
Vol 69 (2) ◽  
pp. 353-361 ◽  
Author(s):  
N. Paroul ◽  
RL. Cansian ◽  
M. Rossato ◽  
GF. Pauletti ◽  
LA. Serafini ◽  
...  
Keyword(s):  
Geographical Distribution ◽  
Rio Grande ◽  
Statistical Analyses ◽  
Rio Grande Do Sul ◽  
Chemotaxonomic Markers ◽  
Main Components ◽  
Made In

The wax hydrocarbon fractions of native Butia and Syagrus species collected from Palms in different regions of the of Rio Grande do Sul state (Brazil) and in Rocha (Uruguay) were analyzed to evaluate their potential as chemotaxonomic markers. The wax was extracted with chloroform and the resulting wax was fractionated by preparative TLC. The hydrocarbon fractions were analyzed by GC-MS. Statistical analyses were completed with the Statistica 5.0 program. The total crude wax yields averaged 0.31% w.w-1 dried leaves for Butia samples and 0.28% for Syagrus samples. The linear hydrocarbons represented on average 15% of the total waxes in the case of Butia samples and 13.7% in Syagrus samples. Hentriacontane and triacontane were the main components of all samples. The comparison of the means showed significant differences among Butia and Syagrus samples, and amongst Butia samples collected in different localities. In the case of the Syagrus collections no consistent groupings could be made. In the case of Butia samples the formation of three groupings could be observed, which were consistent with the species described for their geographical distribution. These results are discussed in the paper.

Complete Photonic Band Gaps of Two-Dimensional Triangular Lattice Photonic Crystals Based on Copper-Coin-Shaped Air Hole

2015 ◽  
Vol 44 (6) ◽  
pp. 623001
Author(s):  
李传起 LI Chuan-qi ◽  
范庆斌 FAN Qing-bin ◽  
杨梦婕 YANG Meng-jie ◽  
张秀容 ZHANG Xiu-rong
Keyword(s):  
Photonic Crystals ◽  
Triangular Lattice ◽  
Band Gaps ◽  
Two Dimensional ◽  
Photonic Band Gaps ◽  
Copper Coin ◽  
Photonic Band ◽  
Air Hole

scholarly journals An Algorithm of Image Encryption Using Logistic and Two-Dimensional Chaotic Economic Maps

Entropy ◽  
2019 ◽  
Vol 21 (1) ◽  
pp. 44 ◽  
Author(s):  
Sameh Askar ◽  
Abdel Karawia ◽  
Abdulrahman Al-Khedhairi ◽  
Fatemah Al-Ammar
Keyword(s):  
Image Encryption ◽  
Security Level ◽  
Two Dimensional ◽  
Secret Key ◽  
Large Space ◽  
Cryptographic Algorithm ◽  
Key Space ◽  
Contrast Analysis ◽  
Encryption Algorithms ◽  
Made In

In the literature, there are many image encryption algorithms that have been constructed based on different chaotic maps. However, those algorithms do well in the cryptographic process, but still, some developments need to be made in order to enhance the security level supported by them. This paper introduces a new cryptographic algorithm that depends on a logistic and two-dimensional chaotic economic map. The robustness of the introduced algorithm is shown by implementing it on several types of images. The implementation of the algorithm and its security are partially analyzed using some statistical analyses such as sensitivity to the key space, pixels correlation, the entropy process, and contrast analysis. The results given in this paper and the comparisons performed have led us to decide that the introduced algorithm is characterized by a large space of key security, sensitivity to the secret key, few coefficients of correlation, a high contrast, and accepted information of entropy. In addition, the results obtained in experiments show that our proposed algorithm resists statistical, differential, brute-force, and noise attacks.

Intermediate filament proteins immunologically related to cytokeratins in the oocyte of the fish Cyprinus carpio

Zygote ◽  
1997 ◽  
Vol 5 (3) ◽  
pp. 207-212 ◽  
Author(s):  
Caterina Mencarelli ◽  
Franco Cotelli
Keyword(s):  
Cyprinus Carpio ◽  
Intermediate Filament ◽  
Mature Oocyte ◽  
Major Protein ◽  
Two Dimensional ◽  
Minor Components ◽  
Vertebrate Species ◽  
Intermediate Filament Proteins ◽  
Molecular Weights ◽  
Antigen Antibody

SummaryWe have used monoclonal antibodies specific for different sets of human cytokeratins and the anti-IFA (Intermediate Filament Antigen) antibody to investigate the expression of intermediate filament proteins in the mature oocyte of the teleostCyprinus carpio. Several polypeptides have been identified, showing molecular weights ranging from 43 to 65kDa. Two-dimensional analysis of the immunoreactive species revealed the presence of at least six major protein spots and a series of minor components, grouped in quite a narrow pI range from 5.52 to 6.28. The general complexity of the carp oocyte cytokeratin-related cytoskeleton appears to be higher than those described for oocytes of other vertebrate species.

Sign in / Sign up

Export Citation Format

Share Document