scholarly journals Minimal Universal Model for Chaos in Laser with Feedback

2021 ◽  
Vol 31 (04) ◽  
pp. 2130013
Author(s):  
Riccardo Meucci ◽  
Stefano Euzzor ◽  
F. Tito Arecchi ◽  
Jean-Marc Ginoux

We revisit the model of the laser with feedback and the minimal nonlinearity leading to chaos. Although the model has its origin in laser physics, with peculiarities related to the [Formula: see text] laser, it belongs to the class of the three-dimensional paradigmatic nonlinear oscillator models giving chaos. The proposed model contains three key nonlinearities, two of which are of the type [Formula: see text], where [Formula: see text] and [Formula: see text] are the fast and slow variables. The third one is of the type [Formula: see text], where [Formula: see text] is an intermediate feedback variable. We analytically demonstrate that it is essential for producing chaos via local or global homoclinic bifurcations. Its electronic implementation in the range of kilo Hertz region confirms its potential in describing phenomena evolving on different time scales.

1966 ◽  
Vol 25 ◽  
pp. 227-229 ◽  
Author(s):  
D. Brouwer

The paper presents a summary of the results obtained by C. J. Cohen and E. C. Hubbard, who established by numerical integration that a resonance relation exists between the orbits of Neptune and Pluto. The problem may be explored further by approximating the motion of Pluto by that of a particle with negligible mass in the three-dimensional (circular) restricted problem. The mass of Pluto and the eccentricity of Neptune's orbit are ignored in this approximation. Significant features of the problem appear to be the presence of two critical arguments and the possibility that the orbit may be related to a periodic orbit of the third kind.


2021 ◽  
Vol 13 (1) ◽  
pp. 39-48
Author(s):  
Chao Luo ◽  
Ailin Jia ◽  
Jianlin Guo ◽  
Wei Liu ◽  
Nanxin Yin ◽  
...  

Abstract Although stochastic modeling methods can achieve multiple implementations of sedimentary microfacies model in dense well blocks, it is difficult to realize continuous convergence of well spacing. Taking the small high-sinuosity meandering river sediments of the third member of Quantou Formation in Songliao Basin as an example, a deterministic modeling method based on geological vector information was explored in this article. Quantitative geological characteristics of point bar sediments were analyzed by field outcrops, modern sediments, and dense well block anatomy. The lateral extension distance, length, and spacing parameters of the point bar were used to quantitatively characterize the thickness, dip angle, and frequency of the lateral layer. In addition, the three-dimensional architecture modeling of the point bar was carried out in the study. The established three-dimensional architecture model of well X24-1 had continuous convergence near all wells, which conformed to the geological knowledge of small high-sinuosity meandering river, and verified the reliability of this method in the process of geological modeling in dense well blocks.


2021 ◽  
pp. 108128652110258
Author(s):  
Yi-Ying Feng ◽  
Xiao-Jun Yang ◽  
Jian-Gen Liu ◽  
Zhan-Qing Chen

The general fractional operator shows its great predominance in the construction of constitutive model owing to its agility in choosing the embedded parameters. A generalized fractional viscoelastic–plastic constitutive model with the sense of the k-Hilfer–Prabhakar ( k-H-P) fractional operator, which has the character recovering the known classical models from the proposed model, is established in this article. In order to describe the damage in the creep process, a time-varying elastic element [Formula: see text] is used in the proposed model with better representation of accelerated creep stage. According to the theory of the kinematics of deformation and the Laplace transform, the creep constitutive equation and the strain of the modified model are established and obtained. The validity and rationality of the proposed model are identified by fitting with the experimental data. Finally, the influences of the fractional derivative order [Formula: see text] and parameter k on the creep process are investigated through the sensitivity analyses with two- and three-dimensional plots.


1967 ◽  
Vol 22 (4) ◽  
pp. 422-431 ◽  
Author(s):  
Kyozaburo Kambe

A general theory of electron diffraction by crystals is developed. The crystals are assumed to be infinitely extended in two dimensions and finite in the third dimension. For the scattering problem by this structure two-dimensionally expanded forms of GREEN’S function and integral equation are at first derived, and combined in single three-dimensional forms. EWALD’S method is applied to sum up the series for GREEN’S function.


2002 ◽  
Vol 124 (4) ◽  
pp. 953-957 ◽  
Author(s):  
D. Lornage ◽  
E. Chatelet ◽  
G. Jacquet-Richardet

Rotating parts of turbomachines are generally studied using different uncoupled approaches. For example, the dynamic behavior of shafts and wheels are considered independently and the influence of the surrounding fluid is often taken into account in an approximate way. These approaches, while often sufficiently accurate, are questionable when wheel-shaft coupling is observed or when fluid elements are strongly coupled with local structural deformations (leakage flow between wheel and casing, fluid bearings mounted on a thin-walled shaft, etc.). The approach proposed is a step toward a global model of shaft lines. The whole flexible wheel-shaft assembly and the influence of specific fluid film elements are considered in a fully three-dimensional model. In this paper, the proposed model is first presented and then applied to a simple disk-shaft assembly coupled with a fluid film clustered between the disk and a rigid casing. The finite element method is used together with a modal reduction for the structural analysis. As thin fluid films are considered, the Reynolds equation is solved using finite differences in order to obtain the pressure field. Data are transferred between structural and fluid meshes using a general method based on an interfacing grid concept. The equations governing the whole system are solved within a time-marching procedure. The results obtained show significant influence of specific three-dimensional features such as disk-shaft coupling and local disk deformations on global behavior.


2005 ◽  
Vol 74 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Reese E. Jones

A Greenwood and Williamson based model for interfacial friction is presented that incorporates the presliding transition phenomenon that can significantly affect small devices. This work builds on previous similar models by developing: an analytical estimate of the transition length in terms of material and surface parameters, a general recursion formula for the case of slip in one direction with multiple reversals and constant normal loading, and a numerical method for the general three-dimensional loading case. In addition, the proposed model is developed within a plasticity-like framework and is shown to have qualitative similarities with published experimental observations. A number of model problems illustrate the response of the proposed model to various loading conditions.


2011 ◽  
Vol 97 (5) ◽  
pp. 728-733
Author(s):  
Yang Liu ◽  
Xiasheng Guo ◽  
Zhao Da ◽  
Dong Zhang ◽  
Xiufen Gong

This article proposes an acoustic nonlinear approach combined with the time reversal technique to image cracks in long bones. In this method, the scattered ultrasound generated from the crack is recorded, and the third harmonic nonlinear component of the ultrasonic signal is used to reconstruct an image of the crack by the time reversal process. Numerical simulations are performed to examine the validity of this approach. The fatigue long bone is modeled as a hollow cylinder with a crack of 1, 0.1, and 0.225 mm in axial, radial and circumferential directions respectively. A broadband 500 kHz ultrasonic signal is used as the exciting signal, and the extended three-dimensional Preisach-Mayergoyz model is used to describe the nonclassical nonlinear dynamics of the crack. Time reversal is carried out by using the filtered third harmonic component. The localization capability depends on the radial depth of the crack.


1987 ◽  
Vol 31 (02) ◽  
pp. 101-106
Author(s):  
Kyu Nam Cho ◽  
William S. Vorus

A new three-dimensional method is proposed for analyzing orthogonally stiffened grillage structures. The method is based on earlier work related to bridge decks. The relationship between system displacement and loads is described mathematically, and matrices are developed to examine the shear compatibility between plate and beam elements. The paper concludes with a comparison between deflections obtained by several different procedures and the proposed model.


2021 ◽  
pp. 31-52
Author(s):  
Marina G. Kurgan ◽  

The House of the Dead was repeatedly compared with the first part of Dante’s The Divine Comedy even in F.M. Dostoevsky’s lifetime. However, his contemporaries usually focused on general analogies, while later scholars paid more attention to the narrative features or individual reminiscences. This research studies the main aspects of the artistic structure of the Dante code, constructing the space of Hell in Dostoevsky’s novel. 1. The organization of space. Alexander Petrovich Goryanchikov, the narrator in The House of the Dead, recreates a three-dimensional image that resembles a gradually narrowing funnel: from a bird’s-eye view, where the prison is seen in its entirety, the focus slowly descends, passing to smaller objects, and finally reaching the “three boards”, which limit Goryanchikov’s personal space. The same principle is employed to construct the space of Hell in Dante’s poem. In The House of the Dead, there is another significant indication of the spatial affinity of Dante’s hell and Dostoevsky’s katorga – active imagery associated with cobwebs and spiders. In the centre of the system of images associated with the designated semantic network is the parade- major, the head of the fortress and the owner of the inmate web. 2. The character system as an element constituting the space of Hell. The character system of The House of the Dead follows the compositional principle of Divine Comedy, where sinners are located in different circles in accordance with their main passion. There are three circles in the prison: the first is formal, according to the court decision; the second is informal, internal, formed by crafts and occupations; the third represents Goryanchikov’s perspective as an exponent of human and humane judgment, which distinguishes another person’s moral state. 3. Torment. The House of the Dead demonstrate a hierarchy in describing the tortures, while freedom becomes a fundamental category to embody the most important motif of physical and moral torment connecting Dostoevsky’s novel with Dante’s experience. The bodily torment ceases to be only the torment of the body to become a pain of the soul, comparable to physical torment, so the soul suffers and burns. Hell as a moral topos was the key for Dostoevsky. In The House of the Dead, he chooses the same way as Dante in The Divine Comedy: vivid corporeality conveys an esoteric metaphor of moral suffering and deep inner movements of the soul.


Processes ◽  
2018 ◽  
Vol 6 (11) ◽  
pp. 230 ◽  
Author(s):  
Lei Wang ◽  
Mengting Wang ◽  
Mingming Guo ◽  
Xingqian Ye ◽  
Tian Ding ◽  
...  

Understanding the hydration behavior of cereals during cooking is industrially important in order to optimize processing conditions. In this study, barley porridge was cooked in a sealed tin can at 100, 115, and 121 °C, respectively, and changes in water uptake and hygroscopic swelling in dehulled barley grains were measured during the cooking of canned porridge. In order to describe and better understand the hydration behaviors of barley grains during the cooking process, a three-dimensional (3D) numerical model was developed and validated. The proposed model was found to be adequate for representing the moisture absorption characteristics with a mean relative deviation modulus (P) ranging from 4.325% to 5.058%. The analysis of the 3D simulation of hygroscopic swelling was satisfactory for describing the expansion in the geometry of barley. Given that the model represented the experimental values adequately, it can be applied to the simulation and design of cooking processes of cereals grains, allowing for saving in both time and costs.


Sign in / Sign up

Export Citation Format

Share Document