MOMENT ARMS OF THE ARM MUSCLES AT THE GLENOHUMERAL JOINT USING THE TENDON EXCURSION METHOD

2008 ◽  
Vol 11 (02) ◽  
pp. 45-53 ◽  
Author(s):  
Eiji Itoi ◽  
Seok-Beom Lee ◽  
Lawrence J. Berglund ◽  
Fredrick M. Schultz ◽  
Patricia G. Neale ◽  
...  

Muscle moment arm defines the function of the muscle. To date, moment arms of the arm muscles at the glenohumeral joint using the tendon excursion method have not been reported. As the functions of these muscles at the shoulder joint are controversial, this study was undertaken to determine the moment arms of the long and short heads of the biceps (LHB, SHB), the coracobrachialis, and the long head of the triceps muscles. The moment arms were determined in 10 cadaveric shoulders by measuring the tendon excursion when the arm was rotated by 1 radian (57.3°) in 22 different motions. The LHB was a flexor, horizontal flexor, and abductor. The SHB and coracobrachialis were flexors, horizontal flexors, and adductors. The long head of the triceps was an extensor and adductor. Arm rotation significantly affected the function of the LHB only: it was an internal rotator in flexion and an external rotator in abduction. This study clarifies the individual function of the arm muscles at the glenohumeral joint.

2018 ◽  
Author(s):  
Josh R Baxter ◽  
Stephen J Piazza

AbstractGeometric and tendon excursion methods have both been used extensively for estimating plantarflexor muscle moment arm in vivo. Geometric measures often utilize magnetic resonance imaging, which can be costly and impractical for many investigations. Estimating moment arm from tendon excursion measured with ultrasonography may provide a cost-effective alternative to geometric measures of moment arm, but how well such measures represent geometry-based moment arms remains in question. The purpose of this study was to determine whether moment arms from tendon excursion can serve as a surrogate for moment arms measured geometrically. Magnetic resonance and ultrasound imaging were performed on 19 young male subjects to quantify plantarflexor moment arm based on geometric and tendon excursion paradigms, respectively. These measurements were only moderately correlated (R2 = 0.21, p = 0.052), and moment arm from tendon excursion under-approximated geometric moment arm by nearly 40% (p < 0.001). This moderate correlation between methods is at odds with a prior report (N = 9) of a very strong correlation (R2 = 0.94) in a similar study. Therefore, we performed 92,378 regression analyses (19 choose 9) to determine if such a strong correlation existed in our study population. We found that certain sub-populations of the current study generated similarly strong coefficients of determination (R2 = 0.92), but 84% of all analyses revealed no correlation (p > 0.05). Our results suggest that the moment arms from musculoskeletal geometry cannot be otherwise obtained by simply scaling moment arms estimated from tendon excursion.


2003 ◽  
Vol 83 (6) ◽  
pp. 1249-1259 ◽  
Author(s):  
S.C. Mitchell ◽  
M.E. DeMont

This research reports on the kinematics of lobster and snow crab walking, documents changes in the moment arms of the mero-carpopodite joint during rotation, and examines scaling effects of morphological and mechanical variables in these crustacean species. Forward walking lobsters and lateral walking crabs were recorded and images analysed to describe the kinematics of these animals, and subsequently morphometric and moment arm measurements made. During forward walking the lobster maintains fixed mero-carpopodite joint angles during both the power and recovery strokes, though each of the walking legs maintains different joint angles. Legs 3 and 5 are maintained at angles which appear to equalize the flexor and extensor moment arms, and leg 4 joint angle appears to maximize the extensor moment arm. The snow crab has a joint excursion angle of between approximately 50° to 150° and, during flat bed walking, the leading and trailing legs move through similar excursion angles. The length of the meropodite for both species are longer for the anterior two leg pairs relative to the posterior two pairs and the rate of growth of the meropodite is largely isometric for the lobster while consistently increases with positive allometry in the crab. The flexor and extensor moment arms generated as the joint undergoes flexion/extension show two distinct patterns with the extensor moment arm being maximized at relatively low joint angles (55°–115°) and the flexor moment arm reaching a plateau at joint extension with angles between 95° and 155°. The flexor apodeme possesses the largest moment arms in all legs for both species, suggesting the flexors are able to generate greater torques. It appears that, mechanically, these laterally moving animals may be ‘pulling’ with the leading legs to a greater extent than ‘pushing’ with the trailing legs.


2016 ◽  
Vol 26 (6) ◽  
pp. 537-542 ◽  
Author(s):  
Alexandre Terrier ◽  
Valérie Parvex ◽  
Hannes A. Rüdiger

Introduction In total hip arthroplasty, cup medialisation with compensatory increase of femoral offset has been proposed to increase the moment arms of abductor muscles. However, this technique is associated with a loss of acetabular bone stock. Previous data indicates that the potential benefit is not constant among patients and is likely related to patient anatomy. Method Therefore, to be able to select patients who would benefit most from this technique, we measured several anatomical parameters of the pelvis and femur in 15 patients; and evaluated correlations between them and the changes of moment arms associated with cup medialisation. The anatomical measurements were performed on 3-D reconstructions of preoperative CT scans. The moment arms of the gluteus medius and gluteus minimus were calculated for an abduction and flexion movement using patient-specific finite element models. Results 6 anatomical parameters were correlated with muscle moment arm variations after cup medialisation. This effect was not systematic for either muscles or movements. Among all parameters, femoral anteversion was the most important parameter in explaining the effect of cup medialisation. Discussion Patients with small femoral anteversion or low-riding greater trochanter benefit more from cup medialisation in terms of moment arm increase in abduction motion.


2010 ◽  
Vol 26 (2) ◽  
pp. 224-228 ◽  
Author(s):  
Kurt Manal ◽  
Justin D. Cowder ◽  
Thomas S. Buchanan

In this article, we outline a method for computing Achilles tendon moment arm. The moment arm is computed from data collected using two reliable measurement instruments: ultrasound and video-based motion capture. Ultrasound is used to measure the perpendicular distance from the surface of the skin to the midline of the tendon. Motion capture is used to determine the perpendicular distance from the bottom of the probe to the ankle joint center. The difference between these two measures is the Achilles tendon moment arm. Unlike other methods, which require an angular change in joint position to approximate the moment arm, the hybrid method can be used to compute the moment arm directly at a specific joint angle. As a result, the hybrid method involves fewer error-prone measurements and the moment arm can be computed at the limits of the joint range of motion. The method is easy to implement and uses modalities that are less costly and more accessible than MRI. Preliminary testing using a lamb shank as a surrogate for a human ankle revealed good accuracy (3.3% error). We believe the hybrid method outlined here can be used to measure subject-specific moment arms in vivo and thus will potentially benefit research projects investigating ankle mechanics.


2021 ◽  
Vol 9 (10_suppl5) ◽  
pp. 2325967121S0033
Author(s):  
Martine Dolan ◽  
Michael Patetta ◽  
Sonia Pradhan ◽  
Danil Rybalko ◽  
Aimee Bobko ◽  
...  

Objectives: The Rotator Cuff (RC) is formed from the subscapularis, supraspinatus, infraspinatus, and teres minor muscles and their tendinous extensions. The 4 RC tendons insert on the humeral head such that they contribute to the dynamic stability of the glenohumeral joint along with their rotational actions on the shoulder. The moment arm can be used to demonstrate the work effort potential that a specific muscle is contributing to a musculoskeletal joint rotation. The objective of this study was to break out RC muscles into multiple fibers, providing more clarity as to how individual fibers contribute to a muscle’s overall moment arm during abduction. The aims of this study are: 1.) to illustrate within each RC muscle how multiple muscle fiber lines of action work together to produce abduction in an intact shoulder 2.) to estimate the moment arm changes that take place when the intact rotator cuff goes through surgical repair with either SCR or RSA after complete supraspinatus tear. We hypothesized that the rotator cuff muscles work differently and in combination at the fiber level to bring about a resultant movement that can be assessed through the proposed method of moment arm calculation for intact RC, complete supraspinatus tear, SCR and RSA. Methods: Five fresh cadaveric shoulder specimens were used in an apparatus where each muscle was maintained in tension with the line of action towards its origin on the scapula (Figure 1). An Optotrack camera kept track of digitized points along both the origin and insertion of the rotator cuff muscles as the shoulder was abducted. Using these digitized points, multiple lines of action were created across the breadth of each muscle. Each muscle force action line was then used to calculate moment arm values during 0-90º abduction (Figure 2). Results: Moment arms calculated for multiple fiber lines spanning the tendon attachment site displayed the variance of fiber contribution and function within each muscle during abduction. Our results indicate that rather than providing a return to anatomical shoulder muscle function, RSA and SCR models produce moment arms that vary between muscles, with some contributing more to abduction and some contributing less. Highlighted below are the infraspinatus results for moment arms of individual fiber lines of action (Figure 3) and calculated mean moment arms (Figure 4) over abduction.ANOVA testing demonstrated a significant difference (p<0.001) when analyzing moment arms of intact, complete supraspinatus tear, SCR, and RSA models in teres minor and infraspinatus. There was no significant difference in moment arm values between the models in the subscapularis (p=0.148). Highlighted in Table 1 are the ANOVA testing results for infraspinatus. Conclusions: Our biomechanical analysis demonstrated sufficient sensitivity to detect differences in moment arms of the four rotator cuff muscles across a variety of models, suggesting changes to even one muscle of the shoulder will have significant implications on the function of other shoulder muscles. Furthermore, our analysis of fiber divisions within the same muscle illustrates the complex nature of the shoulder muscles themselves, and future studies should aim to better explore and model their function. The calculated percent differences from intact beautifully illustrated this complexity, as corrective RSA and SCR procedures provided better resemblance of intact anatomy within some rotator cuff muscles while creating a larger percent difference in other muscle groups. By breaking out RC muscles into multiple fibers, more clarity can be gained as to how individual fibers contribute to a muscle’s overall moment arm during abduction. This may further aid surgical decision-making, specifically for RSA where there is continued debate about whether to reconstruct portions of the RC. Given that the supraspinatus tendon is the most frequently torn tendon in the rotator cuff, especially for athletes who apply repetitive stress to the tendon, the results of this study may help inform post-operative rehabilitation by illustrating how abduction and stability are achieved after SCR and RSA.


Author(s):  
Justin D. Cowder ◽  
Nicole J. Chimera ◽  
Thomas S. Buchanan ◽  
Kurt T. Manal

The musculotendon moment arm (MA) is the perpendicular distance from a muscle’s line of action to the rotational center of a joint. Moment arms are important in muscle modeling [1], and thus their accuracy is of great importance. Current in vivo techniques for computing MAs include the center of rotation and tendon excursion methods [1, 2]. The tendon excursion (TE) method relates the change in musculotendon length to an angular change in joint position [3]. This requires two measurements of musculotendon length for each MA computed. Similarly, the center of rotation method requires multiple image-based geometry measurements to compute the MA for a specific joint angle. The TE and center of rotation methods are both prone to measurement error, and thus it is difficult to ascertain the accuracy of the resulting MA. In this paper we present a novel hybrid methodology combining ultrasound (US) and video-based motion capture to compute the Achilles tendon moment arm. An advantage of this approach is that data used to derive the MA are acquired using highly accurate and reliable measurement instruments (i.e, US & motion capture), which may improve the accuracy of the MA estimate. The purpose of this paper is to present the hybrid methodology and validation results based on testing the method using an animal model.


PeerJ ◽  
2017 ◽  
Vol 5 ◽  
pp. e3976 ◽  
Author(s):  
Alejandro Otero ◽  
Vivian Allen ◽  
Diego Pol ◽  
John R. Hutchinson

Many of the major locomotor transitions during the evolution of Archosauria, the lineage including crocodiles and birds as well as extinct Dinosauria, were shifts from quadrupedalism to bipedalism (and vice versa). Those occurred within a continuum between more sprawling and erect modes of locomotion and involved drastic changes of limb anatomy and function in several lineages, including sauropodomorph dinosaurs. We present biomechanical computer models of two locomotor extremes within Archosauria in an analysis of joint ranges of motion and the moment arms of the major forelimb muscles in order to quantify biomechanical differences between more sprawling, pseudosuchian (represented the crocodile Crocodylus johnstoni) and more erect, dinosaurian (represented by the sauropodomorph Mussaurus patagonicus) modes of forelimb function. We compare these two locomotor extremes in terms of the reconstructed musculoskeletal anatomy, ranges of motion of the forelimb joints and the moment arm patterns of muscles across those ranges of joint motion. We reconstructed the three-dimensional paths of 30 muscles acting around the shoulder, elbow and wrist joints. We explicitly evaluate how forelimb joint mobility and muscle actions may have changed with postural and anatomical alterations from basal archosaurs to early sauropodomorphs. We thus evaluate in which ways forelimb posture was correlated with muscle leverage, and how such differences fit into a broader evolutionary context (i.e. transition from sprawling quadrupedalism to erect bipedalism and then shifting to graviportal quadrupedalism). Our analysis reveals major differences of muscle actions between the more sprawling and erect models at the shoulder joint. These differences are related not only to the articular surfaces but also to the orientation of the scapula, in which extension/flexion movements in Crocodylus (e.g. protraction of the humerus) correspond to elevation/depression in Mussaurus. Muscle action is highly influenced by limb posture, more so than morphology. Habitual quadrupedalism in Mussaurus is not supported by our analysis of joint range of motion, which indicates that glenohumeral protraction was severely restricted. Additionally, some active pronation of the manus may have been possible in Mussaurus, allowing semi-pronation by a rearranging of the whole antebrachium (not the radius against the ulna, as previously thought) via long-axis rotation at the elbow joint. However, the muscles acting around this joint to actively pronate it may have been too weak to drive or maintain such orientations as opposed to a neutral position in between pronation and supination. Regardless, the origin of quadrupedalism in Sauropoda is not only linked to manus pronation but also to multiple shifts of forelimb morphology, allowing greater flexion movements of the glenohumeral joint and a more columnar forelimb posture.


Author(s):  
Raymond J. King ◽  
Taylor D. Niehues ◽  
Prashant Rao ◽  
Ashish D. Deshpande ◽  
Stephen A. Mascaro

The Anatomically Correct Testbed (ACT) Hand was designed to allow researchers to explore the properties of the human hand without the need for cadaver specimens. Previous experiments to validate the anatomical accuracy of the ACT Hand have been performed to comparing the moment arms, the mechanical advantage of the tendons on each joint, to cadaver studies. Here, an experiment involving the individual tendon loading of the ACT index finger was performed as additional anatomical validation of the ACT Hand. These experiments were used to compare the ACT index finger to an index finger cadaver study and validate a bond graph model of the index finger tendon system. The results showed agreement (less than two standard deviations) between the fingertip forces of the ACT index finger and cadaver studies. The results also showed agreement (less than one standard deviation) between the fingertip forces of the ACT index finger and the presented bond graph tendon model.


2000 ◽  
Vol 15 (5) ◽  
pp. 322-329 ◽  
Author(s):  
David K Kuechle ◽  
Stephen R Newman ◽  
Eiji Itoi ◽  
Glen L Niebur ◽  
Bernard F Morrey ◽  
...  

2010 ◽  
Vol 109 (6) ◽  
pp. 1644-1652 ◽  
Author(s):  
Florian Fath ◽  
Anthony J. Blazevich ◽  
Charlie M. Waugh ◽  
Stuart C. Miller ◽  
Thomas Korff

Accurate and reliable estimation of muscle moment arms is a prerequisite for the development of musculoskeletal models. Numerous techniques are available to estimate the Achilles tendon moment arm in vivo. The purposes of this study were 1) to compare in vivo Achilles tendon moment arms obtained using the center of rotation (COR) and tendon excursion (TE) methods and 2) to assess the reliability of each method. For the COR method, magnetic resonance (MR) images from nine participants were obtained at ankle angles of −15°, 0°, and +15° and analyzed using Reuleaux' method. For the TE method, the movement of the gastrocnemius medialis-Achilles tendon junction was recorded using ultrasonography as the ankle was passively rotated through its range of motion. The Achilles tendon moment arm was obtained by differentiation of tendon displacement with respect to ankle angular excursion using seven different differentiation techniques. Moment arms obtained using the COR method were significantly greater than those obtained using the TE method ( P < 0.01), but results from both methods were well correlated. The coefficient of determination between moment arms derived from the COR and TE methods was highest when tendon displacement was linearly differentiated over a ±10° interval ( R2 = 0.94). The between-measurement coefficient of variation was 3.9% for the COR method and 4.5–9.7% for the TE method, depending on the differentiation technique. The high reliabilities and strong relationship between methods demonstrate that both methods are robust against their limitations. The large absolute between-method differences (∼25–30%) in moment arms have significant implications for their use in musculoskeletal models.


Sign in / Sign up

Export Citation Format

Share Document