scholarly journals All-optically integrated photoacoustic and optical coherence tomography: A review

2017 ◽  
Vol 10 (04) ◽  
pp. 1730006 ◽  
Author(s):  
Wei Qiao ◽  
Zhongjiang Chen
Keyword(s):  
Optical Coherence Tomography ◽  
Biomedical Imaging ◽  
Imaging System ◽  
Michelson Interferometer ◽  
Optical Coherence ◽  
Dual Mode ◽  
Imaging Technology ◽  
Fabry Perot ◽  
All Optical ◽  
Potential Applications

All-optically integrated photoacoustic (PA) and optical coherence tomography (OCT) dual-mode imaging technology that could offer comprehensive pathological information for accurate diagnosis in clinic has gradually become a promising imaging technology in the aspect of biomedical imaging during the recent years. This review refers to the technology aspects of all-optical PA detection and system evolution of optically integrated PA and OCT, including Michelson interferometer dual-mode imaging system, Fabry–Perot (FP) interferometer dual-mode imaging system and Mach–Zehnder interferometer dual-mode imaging system. It is believed that the optically integrated PA and OCT has great potential applications in biomedical imaging.

Dual Mode Imaging of All-Optical Non-Contact Photoacoustic Tomography and Optical Coherence Tomography

2016 ◽  
Vol 36 (1) ◽  
pp. 0111001
Author(s):  
谢炳凯 Xie Bingkai ◽  
刘少杰 Liu Shaojie ◽  
吴泳波 Wu Yongbo ◽  
唐志列 Tang Zhilie
Keyword(s):  
Optical Coherence Tomography ◽  
Photoacoustic Tomography ◽  
Optical Coherence ◽  
Dual Mode ◽  
All Optical

scholarly journals Spectroscopic Optical Coherence Tomography for Thin Layer and Foil Measurements

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5653
Author(s):  
Aleksandra M. Kamińska ◽  
Marcin R. Strąkowski ◽  
Jerzy Pluciński
Keyword(s):  
Optical Coherence Tomography ◽  
Thin Layer ◽  
Michelson Interferometer ◽  
High Sensitivity ◽  
Thin Foil ◽  
Thin Layers ◽  
Optical Coherence ◽  
Minimum Value ◽  
Proposed Model ◽  
Fabry Perot

The main goal of this research was to assess if it is possible to evaluate the thickness of thin layers (both thin films on the surface and thin layers below the surface of the tested object) and foils using optical coherence tomography (OCT) for thickness assessment under the resolution of the standard commercially available OCT measurement system. In the proposed solution, light backscattered from the evaluated thin layer has been expressed as a multiple beam interference. Therefore, the OCT system was modeled as a two-beam interferometer (e.g., Michelson), in which one beam propagates from the reference arm and the other comes from a Fabry–Pérot interferometer. As a consequence, the mathematical model consists of the main Michelson interferometer, in which the measuring arm represents the Fabry–Pérot interferometer. The parameters of the layer (or foil) are evaluated by analyzing the minimum value of the interference contrast. The model developed predicts the behavior of the thin layers made from different materials (with different refractive indexes) with different thickness and located at different depths. To verify the correctness of the proposed model, an experiment with a wedge cell has been carried out. The wedge cell was shifted across the scanning beam using a linear translation stage with a micrometer screw under the scanning head. The relationship between the thickness of the gap of the wedge cell and the OCT output signal is presented. For the additional verification of the proposed model, the results of the measurements of the thickness of the thin foil were compared with the theoretical results of the simulations. The film thickness was evaluated based on the calculated positions of the minimum value of interference contrast. A combination of the standard potentialities of OCT with the proposed approach to analyzing the signal produces new metrological possibilities. The method developed allows us to evaluate thickness under the resolution of the system and the location of the layer as well. This produces the possibility of measuring a layer which is covered by another layer. Moreover, it is possible to create a thickness map with high sensitivity to thickness changes. These experiments and simulations are the culmination of preliminary research for evaluating the potential of the proposed measurement method.

scholarly journals Morpho-molecular ex vivo detection and grading of non-muscle-invasive bladder cancer using forward imaging probe based multimodal optical coherence tomography and Raman spectroscopy

The Analyst ◽  
2020 ◽  
Vol 145 (4) ◽  
pp. 1445-1456 ◽  
Author(s):  
Fabian Placzek ◽  
Eliana Cordero Bautista ◽  
Simon Kretschmer ◽  
Lara M. Wurster ◽  
Florian Knorr ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Optical Coherence Tomography ◽  
Imaging System ◽  
Ex Vivo ◽  
Large Field ◽  
Optical Coherence ◽  
Fiber Optic Probe ◽  
Optic Probe ◽  
Muscle Invasive

Characterization of bladder biopsies, using a combined fiber optic probe-based optical coherence tomography and Raman spectroscopy imaging system that allows a large field-of-view imaging and detection and grading of cancerous bladder lesions.

Feasibility and Clinical Utility of Ultra-Widefield–Navigated Swept-Source Optical Coherence Tomography Imaging

2021 ◽  
pp. 247412642199733
Author(s):  
Kyle D. Kovacs ◽  
M. Abdallah Mahrous ◽  
Luis Gonzalez ◽  
Benjamin E. Botsford ◽  
Tamara L. Lenis ◽  
...  
Keyword(s):  
Optical Coherence Tomography ◽  
Clinical Utility ◽  
Clinical Decision Making ◽  
Imaging System ◽  
Imaging Modality ◽  
Case Series ◽  
Subretinal Fluid ◽  
Optical Coherence ◽  
Swept Source ◽  
Oct Imaging

Purpose: This work aims to evaluate the clinical utility and feasibility of a novel scanning laser ophthalmoscope-based navigated ultra-widefield swept-source optical coherence tomography (UWF SS-OCT) imaging system. Methods: A retrospective, single-center, consecutive case series evaluated patients between September 2019 and October 2020 with UWF SS-OCT (modified Optos P200TxE, Optos PLC) as part of routine retinal care. The logistics of image acquisition, interpretability of images captured, nature of the peripheral abnormality, and clinical utility in management decisions were recorded. Results: Eighty-two eyes from 72 patients were included. Patients were aged 59.4 ± 17.1 years (range, 8-87 years). During imaging, 4.4 series of images were obtained in 4.1 minutes, with 86.4% of the image series deemed to be diagnostic of the peripheral pathology on blinded image review. The most common pathologic findings were chorioretinal scars (18 eyes). In 31 (38%) eyes, these images were meaningful in supporting clinical decision-making with definitive findings. Diagnoses imaged included retinal detachment combined with retinoschisis, retinal hole with overlying vitreous traction and subretinal fluid, vitreous inflammation overlying a peripheral scar, Coats disease, and peripheral retinal traction in sickle cell retinopathy. Conclusions: Navigated UWF SS-OCT imaging was clinically practical and provided high-quality characterization of peripheral retinal lesions for all eyes. Images directly contributed to management plans, including laser, injection or surgical treatment, for a clinically meaningful set of patients (38%). Future studies are needed to further assess the value of this imaging modality and its role in diagnosing, monitoring, and treating peripheral lesions.

scholarly journals Synthetic polarization-sensitive optical coherence tomography by deep learning

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Yi Sun ◽  
Jianfeng Wang ◽  
Jindou Shi ◽  
Stephen A. Boppart
Keyword(s):  
Optical Coherence Tomography ◽  
Deep Learning ◽  
Imaging System ◽  
Imaging Modality ◽  
Similarity Index ◽  
Polarization Sensitivity ◽  
Imaging Method ◽  
Optical Coherence ◽  
The Real ◽  
Oct Imaging

AbstractPolarization-sensitive optical coherence tomography (PS-OCT) is a high-resolution label-free optical biomedical imaging modality that is sensitive to the microstructural architecture in tissue that gives rise to form birefringence, such as collagen or muscle fibers. To enable polarization sensitivity in an OCT system, however, requires additional hardware and complexity. We developed a deep-learning method to synthesize PS-OCT images by training a generative adversarial network (GAN) on OCT intensity and PS-OCT images. The synthesis accuracy was first evaluated by the structural similarity index (SSIM) between the synthetic and real PS-OCT images. Furthermore, the effectiveness of the computational PS-OCT images was validated by separately training two image classifiers using the real and synthetic PS-OCT images for cancer/normal classification. The similar classification results of the two trained classifiers demonstrate that the predicted PS-OCT images can be potentially used interchangeably in cancer diagnosis applications. In addition, we applied the trained GAN models on OCT images collected from a separate OCT imaging system, and the synthetic PS-OCT images correlate well with the real PS-OCT image collected from the same sample sites using the PS-OCT imaging system. This computational PS-OCT imaging method has the potential to reduce the cost, complexity, and need for hardware-based PS-OCT imaging systems.

scholarly journals Design and Implementation Guidelines for a Modular Spectral-Domain Optical Coherence Tomography Scanner

2018 ◽  
Vol 2018 ◽  
pp. 1-22 ◽  
Author(s):  
Farid Atry ◽  
Israel Jacob De La Rosa ◽  
Kevin R. Rarick ◽  
Ramin Pashaie
Keyword(s):  
Optical Coherence Tomography ◽  
Imaging System ◽  
Optical Design ◽  
Spectral Domain ◽  
Design Parameters ◽  
Optical Coherence ◽  
Custom Made ◽  
Essential Knowledge ◽  
Sd Oct

In the past decades, spectral-domain optical coherence tomography (SD-OCT) has transformed into a widely popular imaging technology which is used in many research and clinical applications. Despite such fast growth in the field, the technology has not been readily accessible to many research laboratories either due to the cost or inflexibility of the commercially available systems or due to the lack of essential knowledge in the field of optics to develop custom-made scanners that suit specific applications. This paper aims to provide a detailed discussion on the design and development process of a typical SD-OCT scanner. The effects of multiple design parameters, for the main optical and optomechanical components, on the overall performance of the imaging system are analyzed and discussions are provided to serve as a guideline for the development of a custom SD-OCT system. While this article can be generalized for different applications, we will demonstrate the design of a SD-OCT system and representative results for in vivo brain imaging. We explain procedures to measure the axial and transversal resolutions and field of view of the system and to understand the discrepancies between the experimental and theoretical values. The specific aim of this piece is to facilitate the process of constructing custom-made SD-OCT scanners for research groups with minimum understanding of concepts in optical design and medical imaging.

Sign in / Sign up

Export Citation Format

Share Document