Cornstalk-based manganese dioxide nanoparticles for methylene blue decontamination

2019 ◽  
Vol 12 (04) ◽  
pp. 1950061
Author(s):  
Qi Wang ◽  
Xulu Ma ◽  
Jianke Tang ◽  
Zhengwei Song ◽  
Yiwei Wu ◽  
...  

Cornstalk-based MnO2 nanoparticles (MnO2 NPs) were synthesized from KMnO4 through an in situ redox reaction. The synthesis was performed under an open system and did not need complicated apparatus, giving its advantages of easy operation, low cost and green synthesis. Combining the adsorption capacity with oxidation activity, the as-prepared cornstalk-based MnO2 NPs were applied to methylene blue (MB) decontamination. It was demonstrated that the removal efficiency was 79.88% in 60[Formula: see text]min by adsorption in water and reached up to 95.16% in pH [Formula: see text] 3 buffer with the help of oxidation. Most importantly, the decontamination materials could be separated simply by taking them out from MB solutions during the monitoring process or after treatment, avoiding the fussy centrifugation or filtration. This advantage endows the cornstalk-based MnO2 NPs superiority and would raise concerns in water decontamination.

2017 ◽  
Vol 11 (5) ◽  
pp. 538-545 ◽  
Author(s):  
Mahmoud Nasrollahzadeh ◽  
S. Mohammad Sajadi ◽  
Mehdi Maham ◽  
Hamid Reza Dasmeh

2021 ◽  
Author(s):  
Bei Li ◽  
Xiaodong Wang ◽  
Shasha Hong ◽  
Qi Wang ◽  
Lin Li ◽  
...  

Herein, PPy@MnO2 nanocomposites were first harvested by anchoring MnO2 nanosheets on polypyrrole (PPy) nanoparticles via an in-situ redox reaction, and further modifier polyethylene glycol (PEG) and photosensitizer methylene blue (MB)...


Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 215 ◽  
Author(s):  
Shengqiang Zhang ◽  
Changsheng Su ◽  
Hang Ren ◽  
Mengli Li ◽  
Longfeng Zhu ◽  
...  

The nanocomposite preparation procedure plays an important role in achieving a well-established heterostructured junction, and hence, an optimized photocatalytic activity. In this study, a series of g-C3N4/ZnO nanocomposites were prepared through two distinct procedures of a low-cost, environmentally-friendly, in-situ fabrication process, with urea and zinc acetate being the only precursor materials. The physicochemical properties of synthesized g-C3N4/ZnO composites were mainly characterized by XRD, UV–VIS diffuse reflectance spectroscopy (DRS), N2 adsorption-desorption, FTIR, TEM, and SEM. These nanocomposites’ photocatalytic properties were evaluated in methylene blue (MB) dye photodecomposition under UV and sunlight irradiation. Interestingly, compared with ZnO nanorods, g-C3N4/ZnO nanocomposites (x:1, obtained from urea and ZnO nanorods) exhibited weak photocatalytic activity likely due to a “shading effect”, while nanocomposites (x:1 CN, made from g-C3N4 and zinc acetate) showed enhanced photocatalytic activity that can be ascribed to the effective establishment of heterojunctions. A kinetics study showed that a maximum reaction rate constant of 0.1862 min-1 can be achieved under solar light illumination, which is three times higher than that of bare ZnO nanorods. The photocatalytic mechanism was revealed by determining reactive species through adding a series of scavengers. It suggested that reactive ∙O2− and h+ radicals played a major role in promoting dye photodegradation.


Crystals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 441 ◽  
Author(s):  
Fahad A. Alharthi ◽  
Abdulaziz Ali Alghamdi ◽  
Asma A. Alothman ◽  
Zainab M. Almarhoon ◽  
Munairah F. Alsulaiman ◽  
...  

Various ZnO nanomaterials such as nanorods, nanoparticles, and nanosheets were synthesized using Salvadora persica leaf extract via the sol–gel method. The prepared nanomaterials possess a large number of nanocavities. The synthesized nanomaterials were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), UV-visible diffuse reflectance studies (UV-DRS), scanning electron microscopy (SEM), and high resolution transmission electron microscopy (HT-TEM), and these nanomaterials were used to test photocatalytic applications for the degradation of highly hazardous methylene blue dye. The degradation efficiency was higher for materials with nanorods and nanosheets with nanocavities; this was due to the presence of the nanocavities, which made the catalyst more sensitive to light absorption. This method offers a green synthesis of different nanomaterials in bulk quantity at low cost.


Author(s):  
Jian-Shing Luo ◽  
Hsiu Ting Lee

Abstract Several methods are used to invert samples 180 deg in a dual beam focused ion beam (FIB) system for backside milling by a specific in-situ lift out system or stages. However, most of those methods occupied too much time on FIB systems or requires a specific in-situ lift out system. This paper provides a novel transmission electron microscopy (TEM) sample preparation method to eliminate the curtain effect completely by a combination of backside milling and sample dicing with low cost and less FIB time. The procedures of the TEM pre-thinned sample preparation method using a combination of sample dicing and backside milling are described step by step. From the analysis results, the method has applied successfully to eliminate the curtain effect of dual beam FIB TEM samples for both random and site specific addresses.


2019 ◽  
Author(s):  
Nikki Theofanopoulou ◽  
Katherine Isbister ◽  
Julian Edbrooke-Childs ◽  
Petr Slovák

BACKGROUND A common challenge within psychiatry and prevention science more broadly is the lack of effective, engaging, and scale-able mechanisms to deliver psycho-social interventions for children, especially beyond in-person therapeutic or school-based contexts. Although digital technology has the potential to address these issues, existing research on technology-enabled interventions for families remains limited. OBJECTIVE The aim of this pilot study was to examine the feasibility of in-situ deployments of a low-cost, bespoke prototype, which has been designed to support children’s in-the-moment emotion regulation efforts. This prototype instantiates a novel intervention model that aims to address the existing limitations by delivering the intervention through an interactive object (a ‘smart toy’) sent home with the child, without any prior training necessary for either the child or their carer. This pilot study examined (i) engagement and acceptability of the device in the homes during 1 week deployments; and (ii) qualitative indicators of emotion regulation effects, as reported by parents and children. METHODS In this qualitative study, ten families (altogether 11 children aged 6-10 years) were recruited from three under-privileged communities in the UK. The RA visited participants in their homes to give children the ‘smart toy’ and conduct a semi-structured interview with at least one parent from each family. Children were given the prototype, a discovery book, and a simple digital camera to keep at home for 7-8 days, after which we interviewed each child and their parent about their experience. Thematic analysis guided the identification and organisation of common themes and patterns across the dataset. In addition, the prototypes automatically logged every interaction with the toy throughout the week-long deployments. RESULTS Across all 10 families, parents and children reported that the ‘smart toy’ was incorporated into children’s emotion regulation practices and engaged with naturally in moments children wanted to relax or calm down. Data suggests that children interacted with the toy throughout the duration of the deployment, found the experience enjoyable, and all requested to keep the toy longer. Child emotional connection to the toy—caring for its ‘well-being’—appears to have driven this strong engagement. Parents reported satisfaction with and acceptability of the toy. CONCLUSIONS This is the first known study investigation of the use of object-enabled intervention delivery to support emotion regulation in-situ. The strong engagement and qualitative indications of effects are promising – children were able to use the prototype without any training and incorporated it into their emotion regulation practices during daily challenges. Future work is needed to extend this indicative data with efficacy studies examining the psychological efficacy of the proposed intervention. More broadly, our findings suggest the potential of a technology-enabled shift in how prevention interventions are designed and delivered: empowering children and parents through ‘child-led, situated interventions’, where participants learn through actionable support directly within family life, as opposed to didactic in-person workshops and a subsequent skills application.


Sign in / Sign up

Export Citation Format

Share Document