scholarly journals Dramatic Drop in Cell Resistance through Induced Dipoles and Bipolar Electrochemistry

Author(s):  
Nieves Casan-Pastor ◽  
Laura Fuentes-Rodríguez ◽  
Llibertat Abad ◽  
Eulalia Pujades ◽  
Pedro Gómez-Romero ◽  
...  

Abstract The use of slurries of conducting particles has been considered a way to extend the electrode area in some energy storage electrochemical cells. When suspensions of conducting particles are used in electrolytes a decreased impedance is observed, even for concentrations much lower than the theoretical percolation limits. Indeed, it is known that polarization occurs when a conducting material is immersed in an electrolyte in presence of electric fields, and bipolar electrochemistry processes may occur. This work demonstrates the dramatic drop in resistance for electrochemical cells with just a few macroscopic conducting pieces immersed in the electrolyte, in the absence of any electrical contact, through bipolar induction. Furthermore, mediation of soluble redox species between adjacent induced poles of opposite charge results in an additional mechanism for charge transfer, contributing further to the decrease in impedance. Relevant parameters like size, geometry, and spatial occupation of inducible pieces within the electric field, are relevant. Remarkably, the effects observed can explain some empirical observations previously reported for carbon suspensions and slurries. Thus, no electronic percolation requiring particle contact, nor ordering, are needed to explain the good performance associated to lowered impedance These results suggest new engineering designs for electrochemical cells with enhanced currents

1986 ◽  
Vol 73 ◽  
Author(s):  
Alan J. Hurd

ABSTRACTA technique for inducing ordered, close-packed arrangements of various symmetries among colloidal particles is discussed. An external alternating electric field applied to the colloid induces dipole interactions of variable strength by polarizing either the dielectric material of the particles or their electrostatic double layers. Ordering in various symmetries can be obtained by switching the field rapidly between pairs of electrodes, thereby changing the orientation of the induced dipoles. A small dc bias serves to deposit and compact the aligned particles.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Isuru E. Gunathilaka ◽  
Jennifer M. Pringle ◽  
Luke A. O’Dell

AbstractLow-grade waste heat is an abundant and underutilised energy source. In this context, thermo-electrochemical cells (i.e., systems able to harvest heat to generate electricity) are being intensively studied to deliver the promises of efficient and cost-effective energy harvesting and electricity generation. However, despite the advances in performance disclosed in recent years, understanding the internal processes occurring within these devices is challenging. In order to shed light on these mechanisms, here we report an operando magnetic resonance imaging approach that can provide quantitative spatial maps of the electrolyte temperature and redox ion concentrations in functioning thermo-electrochemical cells. Time-resolved images are obtained from liquid and gel electrolytes, allowing the observation of the effects of redox reactions and competing mass transfer processes such as thermophoresis and diffusion. We also correlate the physicochemical properties of the system with the device performance via simultaneous electrochemical measurements.


2004 ◽  
Vol 818 ◽  
Author(s):  
Jean-Claude Bradley ◽  
Sundar Babu ◽  
Patrick Ndungu

AbstractWe report the successful application of bipolar electrochemistry for depositing metals and conducting polymer nano-structures on isolated template-grown carbon nanopipes (CVD-CNP). Metals such as tin, cobalt and nickel were reduced electrochemically at the tips of isolated CVD- CNP from their chloride or nitrate salts. Polypyrrole dendrites could also be grown on both ends of selected CVD-CNP. The potential applications of thus encapsulated CVD-CNP in nano- fluidics and other areas will be discussed.


2021 ◽  
Author(s):  
Luke O'Dell ◽  
Isuru Gunathilaka ◽  
Jennifer Pringle ◽  
Maria Forsyth

Abstract Low-grade waste heat is an abundant and underutilised energy source, and the promise of thermo-electrochemical cells to harvest this resource and power applications such as wearable devices and sensors is increasingly being realised. However, despite substantial advances in performance in recent years, understanding the interior processes occurring within these devices remains a challenge. Here we report an operando magnetic resonance imaging (MRI) approach that can provide quantitative spatial maps of electrolyte temperature and redox ion concentrations in functioning thermo-electrochemical cells. Time-resolved images are obtained from liquid and gel electrolytes, allowing the effects of redox reactions and competing mass transfer effects such as thermophoresis and diffusion to be visualised and correlated with the device performance via simultaneous electrochemical measurements. This method offers valuable insights into these devices and will greatly aid their future design and optimisation.


ACS Nano ◽  
2015 ◽  
Vol 9 (8) ◽  
pp. 8520-8529 ◽  
Author(s):  
Jiewen Xiong ◽  
Qianjin Chen ◽  
Martin A. Edwards ◽  
Henry S. White

2015 ◽  
Vol 3 (3) ◽  
pp. 392-398 ◽  
Author(s):  
Shulun Chen ◽  
Guillaume Wantz ◽  
Laurent Bouffier ◽  
Jun Gao

Author(s):  
R. R. Dils ◽  
P. S. Follansbee

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.


Sign in / Sign up

Export Citation Format

Share Document