scholarly journals Removal of Gutta-Percha/Zinc-Oxide-Eugenol Sealer or Gutta-Percha/Epoxy Resin Sealer from Severely Curved Canals: An In Vitro Study

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Santhoshini Reddy ◽  
Prasanna Neelakantan ◽  
Mohammad Ali Saghiri ◽  
Mehrdad Lotfi ◽  
Chandragiri Venkata Subbarao ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Epoxy Resin ◽  
File Systems ◽  
In Vitro Study ◽  
The Other ◽  
Filling Material ◽  
Gutta Percha ◽  
Bonferroni Adjustment ◽  
Zinc Oxide Eugenol

The aim of this study was to compare the cleanliness of root canal walls after retreatment using two rotary retreatment files to hand instruments in severely curved canals obturated with gutta-percha and two different sealers. Single rooted mandibular premolars (n=90) with root curvatures were instrumented and obturated with gutta-percha and an epoxy resin (Group 1,n=45) or zinc oxide eugenol sealer (Group 2,n=45). Following retreatment of the specimens (n=15ProTaper Universal Retreatment Files (Subgroup B) or R-Endo retreatment files (Subgroup C) after 1 month, split specimens were examined under a stereomicroscope and the percentage of remaining root filling material was statistically compared using one way ANOVA with Bonferroni adjustment for multiple comparisons (P=0.05). The R-Endo system performed significantly better than the other two file systems (P<0.05). None of the systems used in this study cleaned root canals thoroughly. The R-Endo system did provide cleaner walls when compared to the other instruments used. The type of root filling materials had an impact on the outcomes with all techniques.

scholarly journals Volumetric Assessment of Root Canal Obturation Using 3% Nano-Chitosan Versus Zinc Oxide Eugenol (ZOE) and Iodoform-Calcium Hydroxide (Metapex), in Primary Root Canals Shaped with Rotary Versus Manual Methods: A Preliminary In-Vitro Spiral CT Study

2019 ◽  
Author(s):  
Elahe Babashahi ◽  
Maryam Mohmadi Kartalaie ◽  
Leila Basir ◽  
Vahid Rakhshan4
Keyword(s):  
Zinc Oxide ◽  
Calcium Hydroxide ◽  
Primary Root ◽  
In Vitro Study ◽  
The Other ◽  
Root Canals ◽  
Zinc Oxide Eugenol ◽  
Volumetric Assessment ◽  
The Difference

Objectives: In this study, chitosan was introduced and used as a substitute for pulpectomy obturation against conventional materials: zinc oxide eugenol (ZOE) and iodoform-calcium hydroxide (Ca(OH)2) compounds. Also, efficacies of rotary versus manual instrumentations were compared. Materials and Methods: This preliminary in-vitro study was performed on 152 intact non-resorbed root canals of primary molars divided into rotary (n=78) versus hand-instrumentation (n=74) and also into ZOE (n=53), iodoform-Ca(OH)2 (n=50), and 3% nano-chitosan (n=49). Canals were cleaned/shaped using hand or rotary files. Canal spaces were measured using spiral computed tomography (CT). Canals were then obturated using the three materials. The percentages of obturation volume (POV) were estimated. Rotary and manual instrumentations were compared in terms of canal spaces before and after obturation. Three obturation materials were compared in terms of canal spaces after obturation (α=0.05). Results: Average POVs of materials were 96.54% (ZOE), 97.87% (Metapex), and 74.74% (nano-chitosan; P=0.000). POV of chitosan differed from the other two (P=0.000) but the other two were similar (P=0.896). Average POVs were 91.46% (manual) and 88.51% (rotary); the difference was not significant (P=0.322). Pre-obturation spaces of canals for different methods were 3.89 mm3 (manual) and 3.26 mm3 (rotary); the difference was significant (P=0.013). Two-way ANCOVA showed a significant effect of materials (P=0.000) but not root length (P=0.585) or shaping methods (P=0.362) on POVs. Conclusions: Nano-chitosan showed a considerable success rate but it still needs reformulation as it was weaker than the extremely successful commercial competitors. Rotary instrumentation can provide results similar to hand-filing in terms of POV although it might yield smaller canals.

scholarly journals Comparative assessment of manual, rotary and reciprocating instruments for removal of root fillings, using stereomicroscope: An in vitro study

2019 ◽  
Vol 45 (1) ◽  
pp. 54-61
Author(s):  
Afzal Ali ◽  
Sazid Hussain ◽  
Sandeep Metgud ◽  
Shashank Mishra ◽  
Ankita Sharma ◽  
...  
Keyword(s):  
Root Canal ◽  
File Systems ◽  
In Vitro Study ◽  
Filling Material ◽  
Root Canal Filling ◽  
Root Canals ◽  
Tukey Test ◽  
Gutta Percha ◽  
Reciprocating Instruments

Background: To investigate the efficiency of Hedstrom (H; Dentsply Maillefer) file, Protaper Universal Retreatment system (PTUR; Dentsply Maillefer), Mani NRT-GPR files (Mani, Japan) and WaveOne (WO; Dentsply Maillefer) Reciprocating files in removing Gutta Percha (GP) and sealer from root canals. Methods: Sixty canals with less than 10° curvature from extracted human maxillary incisors were used. Root canal reinstrumentation was performed with H, PTUR, Mani NRT-GPR and WO files. Amount of residual root filling material (Gutta-percha and or sealer) were measured by using stereomicroscope. Data of GP or sealer remnants were statistically analyzed using one-way analysis of variance and Tukey test. Results: There were no significant differences among 4 groups in terms of residual root filling material in the apical third (p > 0.05). H-file group showed highest amount of root residual root filling as compared to groups. Conclusions: Reciprocating file system proved to be more efficient in removing the root canal fillings material than other retreatment file systems. H file group showed highest amount of root canal filling material. Bangladesh Med Res Counc Bull 2019; 45: 54-61

EVALUATION OF THE DISSOLVING EFFICACY OF ESSENTIAL OILS ON ENDODONTIC OBTURATING MATERIALS: AN IN VITRO STUDY.

2021 ◽  
pp. 66-68
Author(s):  
Rakesh Pyla ◽  
Jai Kiran Killada ◽  
V Raja Sekhar
Keyword(s):  
Essential Oils ◽  
Epoxy Resin ◽  
In Vitro Study ◽  
Vitro Study ◽  
Lavender Oil ◽  
Citronella Oil ◽  
Gutta Percha ◽  
Lemon Oil ◽  
The Difference

Aim:Endodontic retreatment is a procedure that removes the lling materials from the root canals followed by their cleaning, shaping and obturation. This in-vitro study aimed to compare and evaluate the ability of various essential oils as solvents in dissolving gutta-percha, epoxy resin, and zinc oxide eugenol (ZOE) cements. Materials and methods: A total of 28 cylindrical specimens in each group ZOE, epoxy resin, 28 ISO size 40 gutta-percha cones were prepared and divided into four groups for immersion in the different solvents, i.e. lemon oil, citronella oil, lavender oil, and TCE(Tetrachloroethylene (control)) for 5 minutes. The obturating materials dissolution in the solvents were obtained by the difference between the pre-immersion original weight and the post-immersion weight on a digital analytical scale. Data were statistically analysed by a paired t-test and Analysis of Variance (ANOVA) (p < 0.05). Results: Order of efcacy of dissolution of essential oils was found to be lemon oil > Citronella oil > Lavender oil and was highly signicant (p < 0.01). In all the solvents, Gutta-percha showed maximum dissolution (Fvalue:149.56) followed by ZOE(89.07 ) and resin sealer least (23.86). Conclusion: It can be concluded that the lemon oil can be used as a solvent for dissolving obturating materials.

scholarly journals Marginal Leakage of Endodontic Temporary Restorative Materials around Access Cavities Prepared with Pre-Endodontic Composite Build-Up: An In Vitro Study

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1700
Author(s):  
Atsushi Kameyama ◽  
Aoi Saito ◽  
Akiko Haruyama ◽  
Tomoaki Komada ◽  
Setsuko Sugiyama ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Restorative Material ◽  
Glass Ionomer ◽  
Zinc Oxide Eugenol ◽  
Restorative Materials ◽  
Ionomer Cement

This study aimed to examine the marginal seal between various commercial temporary restorative materials and exposed dentin/built-up composite. Sixty bovine incisors were cut above the cemento-enamel junction, and half of the dentin was removed to form a step, which was built up using flowable resin composite. The root canals were irrigated, filled with calcium hydroxide, and sealed using one of six temporary sealing materials (hydraulic temporary restorative material, temporary stopping material, zinc oxide eugenol cement, glass-ionomer cement, auto-cured resin-based temporary restorative material, and light-cured resin-based temporary restorative material) (n = 10 for each material). The samples were thermocycled 500 times and immersed in an aqueous solution of methylene blue. After 2 days, they were cut along the long axis of the tooth and the depth of dye penetration was measured at the dentin side and the built-up composite side. For the margins of the pre-endodontic resin composite build-up, the two resin-based temporary restorative materials showed excellent sealing. Hydraulic temporary restorative material had a moderate sealing effect, but the sealing effect of both zinc oxide eugenol cement and glass-ionomer cement was poorer.

scholarly journals Antimicrobial efficacy of herbal extracts combined with zinc oxide eugenol as an obturating material in primary teeth – An in vitro study

2019 ◽  
Vol 8 (4) ◽  
pp. 244
Author(s):  
SaiSankar J. Avula ◽  
Senapathi Navaneet ◽  
Sridhar Muktineni ◽  
Pranitha Kakarla ◽  
HarishC Kommineni ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Primary Teeth ◽  
In Vitro Study ◽  
Vitro Study ◽  
Antimicrobial Efficacy ◽  
Herbal Extracts ◽  
Zinc Oxide Eugenol

scholarly journals An In Vitro study to evaluate and compare the flow property of different commercially available zinc oxide eugenol impression materials

2018 ◽  
Vol 9 (5) ◽  
pp. 137
Author(s):  
AnujHarish Chandak ◽  
SaeeP Deshmukh ◽  
UshaM Radke ◽  
RajlakshmiS Banerjee ◽  
TusharK Mowade ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
In Vitro Study ◽  
Flow Property ◽  
Vitro Study ◽  
Zinc Oxide Eugenol ◽  
Impression Materials ◽  
Available Zinc

scholarly journals An Evaluation of GuttaFlow2 in Filling Artificial Internal Resorption Cavities: An in vitro Study

2016 ◽  
Vol 17 (6) ◽  
pp. 445-450 ◽  
Author(s):  
Mohammad Y Hajeer ◽  
Yara Mohammad ◽  
Hisham Alafif ◽  
Oula Yassin
Keyword(s):  
Cross Sections ◽  
Root Canal ◽  
In Vitro Study ◽  
Free Flow ◽  
Control Group ◽  
Injection Technique ◽  
Filling Material ◽  
The Third ◽  
Gutta Percha

ABSTRACT Introduction Obturation of root canal with internal resorption represents a major challenge in Endodontics. In spite of that, usual obturation techniques are often employed without considering the best technique to solve this problem. The goal of this study was to investigate the ability of GuttaFlow2 in filling artificial internal resorption cavities. Materials and methods The study sample included 36 human upper central incisors that were prepared using Protaper system (F4). Internal resorption cavities were prepared by cutting each tooth at 7 mm from the apex and preparing hemispherical cavities on both the sides and then re-attaching them. The sample was randomly separated into three groups (n = 12 in each group). In the first group, thermal injection technique (Obtura II) was employed and served as the control group. In the second group, injection of cold free-flow obturation technique with a master cone (GF2-C) was employed, whereas in the third group injection of cold free-flow obturation without a master cone (GF2) was followed. The teeth were re-cut at the same level as before and examined under a stereomicroscope. Subsequently, the captured images were transferred to AutoCAD program to measure the percentage of total filling “TF,” gutta-percha “G,” sealer “S,” and voids “V” out of the total surface of the cross sections. Results All materials showed high filling properties in terms of “total filling,” ranging from 99.17% (for Obtura II) to 99.72% (for GF2-C). Regarding gutta-percha percentages of filling, they ranged from 83.15 to 83.93%, whereas those for the sealer ranged from 5.71 to 15.24%. GuttaFlow2 group with a master cone appeared to give the best results despite the insignificant differences among the three groups. Conclusion The GuttaFlow2 with a master cone technique seemed to be a promising filling material and gave results similar to those observed with Obtura II. It is recommended for use to obturate internal resorption cavities in clinical practice due to its good adaptability to root canal walls, ease of handling, and application. Clinical significance Internal resorption defects can be successfully filled with GuttaFlow2 material when supplemented with a master cone, and the results are comparable with those obtained with the Obtura II technique. How to cite this article Mohammad Y, Alafif H, Hajeer MY, Yassin O. An Evaluation of GuttaFlow2 in Filling Artificial Internal Resorption Cavities: An in vitro Study. J Contemp Dent Pract 2016;17(6):445-450.

scholarly journals Effectiveness of Three Rotary Niti Instruments and Hand Instrumentation in Removing Gutta Percha from Root Canals: an in vitro Study

2015 ◽  
Vol 03 (03) ◽  
pp. 152-158
Author(s):  
Varun Jindal ◽  
Ajay Chhabra ◽  
◽  
Keyword(s):  
In Vitro Study ◽  
Radiographic Analysis ◽  
Filling Material ◽  
Universal System ◽  
Root Canals ◽  
Gutta Percha ◽  
Significant Difference ◽  
Niti Instruments ◽  
Hand Instrumentation

Abstract Objectives: The study aimed to assess variation in the remaining filling material by radiographic analysis and the time taken for retreatment system, with H-files; the ProTaper Universal Retreatment System; Mtwo retreatment system and the SybronEndo K3. Methods: 120 human mandibular premolars with single straight root canals were prepared with rotary twisted files (up to size 40/0.04) using the crown down technique and filled by cold lateral condensation and the radiographs were taken. After one week, teeth were divided into four groups (n = 30). Gutta-percha was removed using H-files, the ProTaper Universal Retreatment System, Mtwo system and the K3 System. After retreatment radiographs were taken for each sample and the remaining material was calculated for each canal third. Results: Rotary NiTi instruments were significantly faster than the hand instrumentation technique in performing the retreatment. In radiographic analysis there was significant difference in between the groups for coronal third in ProTaper group and for apical third in H-file group. Conclusions: In the radiographic analysis the ProTaper Universal System left less filling material in the coronal third and the H-files left less filling material in apical third as compared to other groups. Rotary instruments worked faster than H files.

Sign in / Sign up

Export Citation Format

Share Document