Estimating the Thickness of Sedimentation within Lower Benue Basin and Upper Anambra Basin, Nigeria, Using Both Spectral Depth Determination and Source Parameter Imaging

The Total Aeromagnetic Data covering the study area was subjected to First Vertical Derivative, Spectral Depth Analysis, and Source Parameter Imaging (SPI). The result from the First Vertical Derivative shows that the Northern part of the area is covered by the young biotite granite of Precambrian origin, and the western edge is covered by the old granite, gneisses, and migmatite of Western Nigeria, while the remaining area is covered by the cretaceous sedimentary deposits. The entire area was divided into forty-eight sections. Spectral Depth Analysis was run for each of these forty-eight sections; the result shows that a maximum depth above 7 km was obtained within the cretaceous sediments of Idah, Ankpa, and below Udegi at the middle of the study area. Minimum depth estimates between 188.0 and 452 meters were observed around the basement regions. Results from Source Parameter Imaging show a minimum depth of 76.983 meters and a maximum thickness of sedimentation of 9.847 km, which also occur within Idah, Ankpa, and Udegi axis. The disparity observed in depth obtained by each method is discussed based on the merit and demerit of each method, and the depths obtained were compared with results from previous researchers. Geophysical implication of the result to oil and gas exploration in the area is briefly discussed.