scholarly journals Characterization of Activated Carbons from Oil-Palm Shell by CO2Activation with No Holding Carbonization Temperature

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
S. G. Herawan ◽  
M. S. Hadi ◽  
Md. R. Ayob ◽  
A. Putra
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Oil Palm ◽  
Pyrolysis Temperature ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Surface Characteristics ◽  
Bet Surface Area ◽  
Preparation Time

Activated carbons can be produced from different precursors, including coals of different ranks, and lignocellulosic materials, by physical or chemical activation processes. The objective of this paper is to characterize oil-palm shells, as a biomass byproduct from palm-oil mills which were converted into activated carbons by nitrogen pyrolysis followed by CO2activation. The effects of no holding peak pyrolysis temperature on the physical characteristics of the activated carbons are studied. The BET surface area of the activated carbon is investigated using N2adsorption at 77 K with selected temperatures of 500, 600, and 700°C. These pyrolysis conditions for preparing the activated carbons are found to yield higher BET surface area at a pyrolysis temperature of 700°C compared to selected commercial activated carbon. The activated carbons thus result in well-developed porosities and predominantly microporosities. By using this activation method, significant improvement can be obtained in the surface characteristics of the activated carbons. Thus this study shows that the preparation time can be shortened while better results of activated carbon can be produced.

Characterization of Activated Carbon from Oil Palm Shell Prepared by H3PO4 for Procion Red Dye Removal

2013 ◽  
Vol 391 ◽  
pp. 51-55 ◽  
Author(s):  
Poedji Loekitowati Hariani ◽  
Muhammad Faizal ◽  
Ridwan ◽  
Marsi ◽  
Dedi Setiabudidaya
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Oil Palm ◽  
Chemical Activation ◽  
Bet Surface Area ◽  
Palm Shell ◽  
Oil Palm Shell ◽  
Red Dye ◽  
Characterization Of Activated Carbon

Characterization of activated carbon from oil palm shell prepared by H3PO4and application for the removal of procion red dye was investigated. Oil palm shell was carbonized at 500°C and prepared by H3PO45 % with ratio of 1:3. Characterized activated carbon by Fourier Transform Infra Red Spectroscopy (FTIR), Brunauer Emmet Teller (BET) surface area, Scanning Electron Microscope-Energy Dispersive X Ray Spectrometry (SEM-EDS). The result indicated that functional groups on the activated carbon surface were influenced by acidic treatment. The activated carbon have surface area 385.991 m2g-1and volume of micro porous 0.201 cm3g-1. The SEM-EDS image showed that activated carbon have many porous structure and the strong peak of C was 92.7 %. Adsorption capacity of activated carbon prepared by H3PO45 % was 278.197 mg g-1which is higher than not chemical activation was 216.456 mg g-1at equilibrium time 5 h.

PREPARATION AND CHARACTERIZATION OF ACTIVATED CARBON FROM OIL PALM EMPTY FRUIT BUNCH WASTES USING ZINC CHLORIDE

2015 ◽  
Vol 74 (11) ◽  
Author(s):  
Riry Wirasnita ◽  
Tony Hadibarata ◽  
Abdull Rahim Mohd Yusoff ◽  
Zainab Mat Lazim
Keyword(s):  
Activated Carbon ◽  
Zinc Chloride ◽  
Oil Palm ◽  
Active Sites ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Proximate Analysis ◽  
Infrared Spectrometry ◽  
Empty Fruit Bunch

An oil palm empty fruit bunch-derived activated carbon has been successfully produced by chemical activation with zinc chloride and without chemical activation. The preparation was conducted in the tube furnace at 500oC for 1 h. The surface structure and active sites of activated carbons were characterized by means of Fourier transform infrared spectrometry and field emission scanning electron microscopy. The proximate analysis including moisture content, ash content, bulk density, pH, and pH at zero charge was conducted to identify the psychochemical properties of the adsorbent. The results showed that the zinc chloride-activated carbon has better characteristics compared to the carbon without chemical activation.  

Physical and Chemical Activation Effect on Activated Carbon Prepared from Local Pineapple Waste

2014 ◽  
Vol 699 ◽  
pp. 87-92 ◽  
Author(s):  
Abdul Rahim Yacob ◽  
Adlina Azmi ◽  
Mohd Khairul Asyraf Amat Mustajab
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Surface Area ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Bet Surface Area ◽  
Activation Effect ◽  
Pineapple Waste ◽  
Pineapple Peel ◽  
Physical And Chemical

The characteristics and quality of activated carbons prepared depending on the chemical and physical properties of the starting materials and the activation method used. In this study, activated carbon prepared using pineapple waste. Three parts of pineapple waste which comprises of peel, crown and leaf were studied. For comparison activated carbon were prepared by both physical and chemical activation respectively. Three types of chemicals were used, phosphoric acid (H3PO4), sulphuric acid (H2SO4), and potassium hydroxide (KOH). The preparation includes carbonization at 200°C and activation at the 400°C using muffle furnace. The chemical characterization of the activated carbon was carried out using Thermogravimetric analysis (TGA), Nitrogen gas adsorption analysis and Fourier transform infrared (FTIR). The highest BET surface area was achieved when the pineapple peel soaked in 20% phosphoric acid with a surface area of 1115 m2g-1. FTIR analysis indicates that the reacted pineapple waste successfully converted into activated carbons.

Preparation of Activated Carbon of Lignin from Straw Pulping by Chemical Activation Using Potassium Carbonate

2011 ◽  
Vol 704-705 ◽  
pp. 517-522 ◽  
Author(s):  
Xiao Juan Jin ◽  
Zhi Ming Yu ◽  
Gao Jiang Yan ◽  
Wu Yu
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Iodine Number ◽  
Surface Area ◽  
Potassium Carbonate ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Bet Surface Area ◽  
Chemical Agent ◽  
Optimum Conditions

Activated carbons were prepared through chemical activation of lignin from straw pulping precursor using potassium carbonate as the chemical agent. Effects of activated temperature, K2CO3/lignin ratio and the activated time on the yield, Iodine number of activated carbon were investigated. Experimental results indicated that the optimum conditions were as follow: activated temperature 800°C, K3CO3(40% concentration) /lignin ratio 5: l, activated time 50min. These conditions allowed us to obtain a BET surface area of 1104 m2/g, including the external or non-microporous surface of 417 m2/g，Amount of methylene blue adsorption, Iodine number and the yield of activated carbon prepared under optimum conditions were 10.6mL/0.lg,1310 mg/g and 19.75%, respectively.

Preparation of Capacitor’s Electrode from Coconut Shell

2014 ◽  
Vol 875-877 ◽  
pp. 1585-1589
Author(s):  
Arenst Andreas Arie ◽  
Joong Kee Lee
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Electrode Materials ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Coconut Shell ◽  
Bet Surface Area ◽  
Type I ◽  
Activation Temperature ◽  
Bet Analysis

Activated carbons were prepared from coconut shell by chemical activation method and utilized as electrode materials for electrochemical double layer capacitor (EDLC). A preliminary characteristic of activated carbon from coconut shell includes the Brunnaeur Emmett Teller (BET) analysis and cyclic voltammetry measurements. The BET surface area is not affected by the variation of activation temperature as both of the samples showed BET surface area of about 850-870 m2g-1. The N2 adsorption–desorption isotherms showed that the sample exhibited type I characteristics according to IUPAC classification, which confirms its micro-porosity. Compared with the un-activated carbon samples, the activated ones exhibited the better electrochemical properties with a specific capacitance of 150 F g−1 at a scan rate of 2 mV s−1. The good performance of activated carbon is attributed to the enhancement of surface area due to the KOH pretreatment which can open new pores accessible for the ionic transport

scholarly journals Preparation and Characterization of Green Porous Palm Shell Based Activated Carbon by Two Step Chemical Activation Using KOH

2015 ◽  
Vol 773-774 ◽  
pp. 1127-1132 ◽  
Author(s):  
Abdurrahman Garba ◽  
Hatijah Basri ◽  
Noor Shawal Nasri
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Palm Oil ◽  
Organic Contaminants ◽  
Agricultural Waste ◽  
Chemical Activation ◽  
Bet Surface Area ◽  
Water And Wastewater ◽  
Microscopy Images

The large quantity of agricultural waste materials that poses disposal challenge to our environment could be converted into useful products such as activated carbon (AC). Palm oil shell based porous AC was prepared by two step process using KOH as the chemical activant. Palm oil shell was carbonized at 800°C for 2 hours and activated using CO2 at same temperature for 1 hour which yield 23.27% fixed carbon. The AC was characterized by Langmuir surface area, BET surface area and pore volume of 410.7 m2/g, 350 m2/g and 0.2 cm3/g respectively, the FTIR analysis identified the presence of alkanes, carbonyls and hydroxyls as the main functional groups in the AC. Scanning electron microscopy images illustrates the gradual formation of pores from the precursor to the produced AC due to elimination of volatiles and contaminants in the material. However, the AC produced showed basic properties suitable for the removal of hydrophobic organic contaminants in water and wastewater.

scholarly journals Preparation and Characterization of Activated Carbon from Poplar Sawdust by Chemical Activation: Comparison of Different Activating Agents and Carbonization Temperature

2018 ◽  
Vol 3 (11) ◽  
pp. 6-11 ◽  
Author(s):  
Funda Ateş ◽  
Öznur Özcan
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Experimental Studies ◽  
Carbonization Temperature ◽  
Bet Surface Area ◽  
Koh Activation ◽  
Chemical Agent ◽  
Poplar Sawdust

Activated carbons were prepared from poplar sawdust by chemical activation using ZnCl2, H3PO4 or KOH. The influence of activating agents, carbonization temperatures ranging from 500 ºC to 800 ºC, and mass ratio of chemical agent to precursor (1:1 and 2:1) on the porosity of activated carbons were studied. The properties of the carbons were characterized by adsorption/desorption of nitrogen to determine the BET areas, scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR). It was determined that the surface morphology and textural characteristics of activated carbons vary depending on the carbonization temperature or chemical agent. Maximum surface areas were obtained at carbonization temperatures of 500, 700 and 800 ºC for H3PO4, KOH and ZnCl2 activation, respectively. The activated carbons prepared using ZnCl2 and H3PO4 activation had a higher BET surface area (nearly 1100 m2/g) than that of the KOH activation (761 m2/g). This study also presents a comparison of mechanisms of activating agents and carbonization temperature. As a result of the experimental studies, positive results were obtained, and the production of activated carbon with a high surface area was conducted. 

scholarly journals Computer Analysis of the Effects of Time and Gas Atmosphere of the Chemical Activation on the Development of the Porous Structure of Activated Carbons Derived from Oil Palm Shell

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6067
Author(s):  
Mirosław Kwiatkowski
Keyword(s):  
Activated Carbon ◽  
Porous Structure ◽  
Surface Area ◽  
Computer Analysis ◽  
Oil Palm ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Microporous Structure ◽  
Oil Palm Shell ◽  
Gas Atmosphere

The results of the advanced computer analysis of the influence of time and gas atmosphere of the chemical activation process on the microporous structure formation of activated carbons prepared from oil palm shell via microwave irradiation and activation, using potassium hydroxide as an activation agent, are presented in this paper. The quenched solid density functional theory (QSDFT) and the new numerical clustering-based adsorption analysis (LBET) methods were used especially in the analysis of the microporous structure of the activated carbons, taking into account the surface heterogeneity, and the results obtained were confronted with the simple results achieved earlier using Brunauer–Emmett–Teller (BET) and T-plot methods. On the basis of the computer analysis carried out and taking into account the results obtained, it has been shown that the material with the best adsorption properties and suitable for practical industrial applications is activated carbon obtained in a gaseous nitrogen atmosphere at an activation time of 30 min. Moreover, the value of the heterogeneity parameter indicates that the surface area of this activated carbon is homogeneous, which is of particular importance in the practical application. The paper emphasizes that an erroneous approach to the interpretation of analytical results based on gas adsorption isotherms, which consists in basing conclusions only on the values of a single parameter such as specific surface area or micropore volume, should be avoided. Therefore, it is recommended to use in the analysis of measurement data, several methods of porous structure analysis, including methods considering the heterogeneity of the surface, and when interpreting the results one should also take into account the adsorption process for which the analyzed materials are dedicated.

scholarly journals Effect of textural and chemical characteristics of activated carbons on phenol adsorption in aqueous solutions

2017 ◽  
Vol 19 (4) ◽  
pp. 87-93 ◽  
Author(s):  
Diana P. Vargas ◽  
Liliana Giraldo ◽  
Juan Carlos Moreno-Piraján
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Surface Area ◽  
Pore Volume ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Chemical Properties ◽  
Granular Activated Carbon ◽  
Bet Surface Area ◽  
Phenol Adsorption

Abstract The effect of textural and chemical properties such as: surface area, pore volume and chemical groups content of the granular activated carbon and monoliths on phenol adsorption in aqueous solutions was studied. Granular activated carbon and monolith samples were produced by chemical activation. They were characterized by using N2 adsorption at 77 K, CO2 adsorption at 273 K, Boehm Titrations and immersion calorimetry in phenol solutions. Microporous materials with different pore size distribution, surface area between 516 and 1685 m2 g−1 and pore volumes between 0.24 and 0.58 cm3 g−1 were obtained. Phenol adsorption capacity of the activated carbon materials increased with increasing BET surface area and pore volume, and is favored by their surface functional groups that act as electron donors. Phenol adsorption capacities are in ranged between 73.5 and 389.4 mg · g−1.

scholarly journals Preparation and characterization of activated carbons from different kinds of coal

2020 ◽  
pp. 25-31
Author(s):  
Batkhishig Damdin ◽  
Purevsuren Barnasan ◽  
Chung-Jun Lin ◽  
Batbileg Sanjaa ◽  
Ariunaa Alyeksandr
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Iodine Number ◽  
Surface Area ◽  
Pore Volume ◽  
Activated Carbons ◽  
Bet Surface Area ◽  
Water Steam ◽  
Initial Coal

Initial coal was purified in heavy liquid with a density 1.3 cm3 of ZnCl2 solution and purified coal was carbonized and the initial coal samples of each deposits were purified by pyrolysis. Thus, the yield of pyrolysis hard residue in the enriched sample was slightly higher than in the hard residue of initial coal. Therefore, pyrolysis hard residue of purified coal (carbonized sample) was activated at 800°C for 2 hours by preheated water steam. Activated carbons (ACs) and non-activated and non-carbonized coal from Baganuur, Ereen and Nariin Sukhait deposits were technically analyzed and their iodine number, BET surface area, pore volume and adsorption of methylene blue (MB) were determined. When these results were compared, these indicators increased 5-17 times in the Baganuur activated carbon (BN-AC), Ereen activated carbon (E-AC) and Nariin Sukhait activated carbon (NS-AC) as compared to inactivated coal.

Sign in / Sign up

Export Citation Format

Share Document