scholarly journals A Multimode Adaptive Pushover Procedure for Seismic Assessment of Integral Bridges

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Ehsan Mohtashami ◽  
Ahmad Shooshtari
Keyword(s):  
Seismic Response ◽  
Demand Curve ◽  
Inelastic Response ◽  
Higher Modes ◽  
Seismic Performance Evaluation ◽  
History Analysis ◽  
Integral Bridges ◽  
Response History Analysis ◽  
Modal Mass ◽  
Adaptive Pushover

This paper presents a new adaptive pushover procedure to account for the effect of higher modes in order to accurately estimate the seismic response of bridges. The effect of higher modes is considered by introducing a minimum value for the total effective modal mass. The proposed method employs enough number of modes to ensure that the defined total effective modal mass participates in all increments of the pushover loading. An adaptive demand curve is also developed for assessment of the seismic demand. The efficiency and robustness of the proposed method are demonstrated by conducting a parametric study. The analysis includes 18 four-span integral bridges with various heights of piers. The inelastic response history analysis is employed as reference solution in this study. Numerical results indicate excellent accuracy of the proposed method in assessment of the seismic response. For most bridges investigated in this study, the difference between the estimated response of the proposed method and the inelastic response history analysis is less than 25% for displacements and 10% for internal forces. This indicates a very good accuracy compared to available pushover procedures in the literature. The proposed method is therefore recommended to be applied to the seismic performance evaluation of integral bridges for engineering applications.

scholarly journals Proposal of A Non Linear Static Analysis Procedure for Bridges: The Incremental Modal Pushover Analysis for Bridges (IMPAβ)

2020 ◽  
Author(s):  
Alessandro Vittorio Bergami ◽  
Camillo Nuti ◽  
Davide Lavorato ◽  
Gabriele Fiorentino ◽  
Bruno Briseghella
Keyword(s):  
Seismic Response ◽  
Good Accuracy ◽  
Pushover Analysis ◽  
Higher Modes ◽  
Modal Pushover Analysis ◽  
Dynamic Analyses ◽  
Non Linear ◽  
Modal Mass ◽  
Existing Bridges ◽  
Modal Pushover

A large number of bridges are designed and built without considering seismic actions and, differently from buildings, there are currently no comprehensive guidelines to evaluate existing bridges without performing, as in the well known incremental dynamic analysis (IDA), complex non linear dynamic analyses (RHA). Bridges are structurally very different from building but, at the same time, are sensitive to higher modes as well as many multi-storey buildings that inspired innovative pushover procedures such as the well known modal pushover analysis (MPA). In the present study the incremental modal pushover analysis (IMPA), a pushover based approach already proposed and applied on buildings by the same authors, is revised and proposed for bridges (IMPAβ). IMPAβ accounts for the effects of higher modes in order to accurately estimate the seismic response of bridges; the effect of higher modes is considered by introducing a suitable number of modes to ensure the participation of a predefined total effective modal mass. The efficiency of the proposed method is demonstrated by conducting a study on two bridges, one regular and one irregular, and the IDA analysis is employed as reference solution. Numerical results indicate good accuracy of the proposed method in assessing the seismic response and a very good accuracy if compared to other available pushover procedures available in the literature.

A subset of CyberShake ground-motion time series for response-history analysis

2021 ◽  
pp. 875529302098197
Author(s):  
Jack W Baker ◽  
Sanaz Rezaeian ◽  
Christine A Goulet ◽  
Nicolas Luco ◽  
Ganyu Teng
Keyword(s):  
Time Series ◽  
Los Angeles ◽  
Seismic Hazard ◽  
Ground Motion ◽  
Ground Motions ◽  
Response Spectra ◽  
Motion Time ◽  
History Analysis ◽  
Response History Analysis ◽  
Simulated Ground Motions

This manuscript describes a subset of CyberShake numerically simulated ground motions that were selected and vetted for use in engineering response-history analyses. Ground motions were selected that have seismological properties and response spectra representative of conditions in the Los Angeles area, based on disaggregation of seismic hazard. Ground motions were selected from millions of available time series and were reviewed to confirm their suitability for response-history analysis. The processes used to select the time series, the characteristics of the resulting data, and the provided documentation are described in this article. The resulting data and documentation are available electronically.

Nonlinear Dynamic Analysis of the Damping Frame Structure System

2012 ◽  
Vol 594-597 ◽  
pp. 886-890 ◽  
Author(s):  
Gan Hong ◽  
Mei Li ◽  
Yi Zhen Yang
Keyword(s):  
Energy Dissipation ◽  
Seismic Response ◽  
Nonlinear Dynamic ◽  
Time History ◽  
Time History Analysis ◽  
Frame Structure ◽  
Force Model ◽  
Operating Characteristics ◽  
Restoring Force ◽  
History Analysis

Abstract. In the paper, take full account of energy dissipation operating characteristics. Interlayer shear-frame structure for the analysis of the Wilson-Θmethod ELASTOPLASTIC schedule, the design of a nonlinear dynamic time history analysis procedure. On this basis, taking into account the restoring force characteristics of the energy dissipation system, the inflection point in the restoring force model treatment, to avoid a result of the calculation results of distortion due to the iterative error. A frame structure seismic response time history analysis results show that: the framework of the energy dissipation significantly lower than the seismic response of the common framework, and its role in the earthquake when more significant.

scholarly journals Evaluation of p-delta effect in structural seismic response

2018 ◽  
Vol 162 ◽  
pp. 04019 ◽  
Author(s):  
Sardasht Sardar ◽  
Ako Hama
Keyword(s):  
Seismic Response ◽  
Pushover Analysis ◽  
Nonlinear Dynamic Analysis ◽  
Time History ◽  
Steel Structure ◽  
Nonlinear Static Analysis ◽  
Structural Behavior ◽  
Finite Element Software ◽  
History Analysis ◽  
Nonlinear Static

Numerous recent studies have assessed the effect of P-Delta on the structures. This paper investigates the effect of P-Delta in seismic response of structures with different heights. For indicating the effect of P-Delta, nonlinear static analysis (pushover analysis) and nonlinear dynamic analysis (Time history analysis) were conducted by using finite element software. The results showing that the P-Delta has a significant impact on the structural behavior mainly on the peak amplitude of building when the height of the structures increased. In addition, comparison has been made between concrete and steel structure.

scholarly journals Evaluation of a Modified MPA Procedure Assuming Higher Modes as Elastic to Estimate Seismic Demands

2004 ◽  
Vol 20 (3) ◽  
pp. 757-778 ◽  
Author(s):  
Anil K. Chopra ◽  
Rakesh K. Goel ◽  
Chatpan Chintanapakdee
Keyword(s):  
Structural Engineering ◽  
Pushover Analysis ◽  
Computational Effort ◽  
Attractive Alternative ◽  
Engineering Practice ◽  
Seismic Demands ◽  
History Analysis ◽  
Modes Of Vibration ◽  
Response History Analysis ◽  
Damped Systems

The modal pushover analysis (MPA) procedure, which includes the contributions of all significant modes of vibration, estimates seismic demands much more accurately than current pushover procedures used in structural engineering practice. Outlined in this paper is a modified MPA (MMPA) procedure wherein the response contributions of higher vibration modes are computed by assuming the building to be linearly elastic, thus reducing the computational effort. After outlining such a modified procedure, its accuracy is evaluated for a variety of frame buildings and ground motion ensembles. Although it is not necessarily more accurate than the MPA procedure, the MMPA procedure is an attractive alternative for practical application because it leads to a larger estimate of seismic demands, improving the accuracy of the MPA results in some cases (relative to nonlinear response history analysis) and increasing their conservatism in others. However, such conservatism is unacceptably large for lightly damped systems, with damping significantly less than 5%. Thus the MMPA procedure is not recommended for such systems.

Sign in / Sign up

Export Citation Format

Share Document