scholarly journals Corneal Biomechanical Assessment Using Corneal Visualization Scheimpflug Technology in Keratoconic and Normal Eyes

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Lei Tian ◽  
Yi-Fei Huang ◽  
Li-Qiang Wang ◽  
Hua Bai ◽  
Qun Wang ◽  
...  
Keyword(s):  
Intraocular Pressure ◽  
Corneal Thickness ◽  
Area Under The Curve ◽  
Biomechanical Properties ◽  
Corvis St ◽  
Biomechanical Assessment ◽  
Deformation Amplitude ◽  
Biomechanical Parameters ◽  
And Control ◽  
Corneal Biomechanical Properties

Purpose. To compare the corneal biomechanical properties of keratoconic patients and age-matched controls using corneal visualization Scheimpflug technology (Corvis ST).Methods. Sixty keratoconic eyes from 47 keratoconus patients and 60 normal eyes from 60 controls were enrolled in this prospective study. Tomography and biomechanical parameters of all eyes were obtained with the Pentacam and Corvis ST, respectively. Intraocular pressure was measured using a Goldmann applanation tonometer.Results.The tomography and biomechanical parameters of the keratoconic corneas were significantly different from those of the normal corneas except for the anterior chamber angle, first applanation length, the highest concavity time, and peak distance. The deformation amplitude was the best predictive parameter (area under the curve: 0.882), with a sensitivity of 81.7%, although there was a significant overlap between keratoconic and normal corneas that ranged from 1.0 to 1.4 mm. In both the keratoconus and control groups, the deformation amplitude was negatively correlated with intraocular pressure, central corneal thickness, and corneal volume at 3 and 5 mm.Conclusions. Corvis ST offers an alternative method for measuring corneal biomechanical properties. The possibility of classifying keratoconus based on deformation amplitude deserves clinical attention.

scholarly journals Corneal Biomechanical Properties in Myopic Eyes Measured by a Dynamic Scheimpflug Analyzer

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jingyi Wang ◽  
Ying Li ◽  
Yumei Jin ◽  
Xue Yang ◽  
Chan Zhao ◽  
...  
Keyword(s):  
Correlation Analysis ◽  
Axial Length ◽  
Biomechanical Properties ◽  
Spherical Equivalent ◽  
Corvis St ◽  
Deformation Amplitude ◽  
Bivariate Correlation ◽  
Biomechanical Parameters ◽  
The Relationship ◽  
Corneal Biomechanical Properties

Purpose. To evaluate the corneal biomechanical parameters in myopic and emmetropic eyes using Corneal Visualization Scheimpflug Technology (CorVis ST).Methods.103 myopic and emmetropic eyes of 103 patients were examined. Corneal biomechanical parameters, axial length, and mean keratometry were measured using CorVis ST, IOL Master, and topography, respectively. Corneal biomechanical properties were compared within four groups. Bivariate correlation analysis was used to assess the relationship between corneal biomechanical parameters and ocular characteristics.Results.Four of ten corneal biomechanical parameters, namely, deformation amplitude (DA), first- and second-applanation time (A1-time, A2-time), and radius at highest concavity (HC radius), were significantly different within the four groups (P<0.05). In correlation analysis, DA was positively correlated with axial length (r=0.20,P=0.04); A2-time was positively correlated with spherical equivalent (SE) (r=0.24,P=0.02); HC radius was positively correlated with SE (r=0.24,P=0.02) and was negatively correlated with mean keratometry (r=-0.20,P=0.046) and axial length (r=-0.21,P=0.03).Conclusions.The corneal refraction-related biomechanical alterations were associated with ocular characteristics. Highly myopic eyes exhibited longer DA and smaller HC radius than do moderately myopic eyes; the eyes with longer axial length tend to have less corneal stiffness and are easier to deform under stress.

scholarly journals Corneal Biomechanical Properties in Varying Severities of Myopia

2021 ◽  
Vol 8 ◽  
Author(s):  
Mohammad-Reza Sedaghat ◽  
Hamed Momeni-Moghaddam ◽  
Abbas Azimi ◽  
Zohreh Fakhimi ◽  
Mohammed Ziaei ◽  
...  
Keyword(s):  
Axial Length ◽  
Corneal Thickness ◽  
Biomechanical Properties ◽  
Cross Sectional Study ◽  
Geometrical Parameters ◽  
Cross Sectional ◽  
Corvis St ◽  
Multiple Parameters ◽  
Inverse Radius ◽  
Biomechanical Parameters

Purpose: To investigate corneal biomechanical response parameters in varying degrees of myopia and their correlation with corneal geometrical parameters and axial length.Methods: In this prospective cross-sectional study, 172 eyes of 172 subjects, the severity degree of myopia was categorized into mild, moderate, severe, and extreme myopia. Cycloplegic refraction, corneal tomography using Pentacam HR, corneal biomechanical assessment using Corvis ST and Ocular Response Analyser (ORA), and ocular biometry using IOLMaster 700 were performed for all subjects. A general linear model was used to compare biomechanical parameters in various degrees of myopia, while central corneal thickness (CCT) and biomechanically corrected intraocular pressure (bIOP) were considered as covariates. Multiple linear regression was used to investigate the relationship between corneal biomechanical parameters with spherical equivalent (SE), axial length (AXL), bIOP, mean keratometry (Mean KR), and CCT.Results: Corneal biomechanical parameters assessed by Corvis ST that showed significant differences among the groups were second applanation length (AL2, p = 0.035), highest concavity radius (HCR, p &lt; 0.001), deformation amplitude (DA, p &lt; 0.001), peak distance (PD, p = 0.022), integrated inverse radius (IR, p &lt; 0.001) and DA ratio (DAR, p = 0.004), while there were no significant differences in the means of pressure-derived parameters of ORA between groups. Multiple regression analysis showed all parameters of Corvis ST have significant relationships with level of myopia (SE, AXL, Mean KR), except AL1 and AL2. Significant biomechanical parameters showed progressive reduction in corneal stiffness with increasing myopia (either with greater negative SE or greater AXL), independent of IOP and CCT. Also, corneal hysteresis (CH) or ability to dissipate energy from the ORA decreased with increasing level of myopia.Conclusions: Dynamic corneal response assessed by Corvis ST shows evidence of biomechanical changes consistent with decreasing stiffness with increasing levels of myopia in multiple parameters. The strongest correlations were with highest concavity parameters where the sclera influence is maximal.

scholarly journals The changes of corneal biomechanical properties with long-term treatment of prostaglandin analogue measured by Corvis ST

2020 ◽  
Author(s):  
Na Wu ◽  
Yuhong Chen ◽  
Yaping Yang ◽  
Xinghuai Sun
Keyword(s):  
Open Angle Glaucoma ◽  
Corneal Thickness ◽  
Biomechanical Properties ◽  
Term Treatment ◽  
Prostaglandin Analogue ◽  
Corvis St ◽  
Long Term Treatment ◽  
Corneal Biomechanical Properties

Abstract Background: To investigate the corneal biomechanical changes in primary open angle glaucoma (POAG) patients treated with long-term prostaglandin analogue (PGA). Methods: 111 newly diagnosed POAG patients, including 43 high tension glaucoma (HTG) and 68 normal tension glaucoma (NTG), were measured by Corvis ST to obtain intraocular pressure (IOP), central corneal thickness (CCT) and corneal biomechanical parameters at baseline and at each follow-up visit after initiation of PGA treatment. The follow-up measurements were analyzed by the generalized estimate equation model with an exchangeable correlation structure. Restricted cubic spline was employed to estimate the dose-response relation between follow-up time and corneal biomechanics．Results: The mean follow-up time was 10.3 ± 7.02 months. Deformation amplitude (β=-0.0015, P=0.016), the first applanation velocity (AV1, β=-0.0004, P=0.00058) decreased and the first applanation time (AT1, β=0.0089, P<0.000001) increased statistically significantly with PGA therapy over time after adjusting for age, gender, axial length, corneal curvature, IOP and CCT. In addition, AT1 was lower (7.2950 ± 0.2707 in NTG and 7.5889 ± 0.2873 in HTG, P=0.00011) and AV1 was greater (0.1478 ± 0.0187 in NTG and 0.1314 ± 0.0191 in HTG, P=0.00002) in NTG than in HTG after adjusting for confounding factors.Conclusions: Chronic use of PGA probably influences the corneal biomechanical properties directly, which is to make cornea less deformable. Besides, corneas in NTG tended to be more deformable compared to those in HTG with long-term treatment of PGA.

Analysis of keratopographic and biomechanical corneal indicators with evaluation of the impact of diagnostic results on myopic refraction patient management tactics

2021 ◽  
pp. 196-199
Author(s):  
D.D. Sibakin ◽  
◽  
V.A. Breev ◽  
E.G. Solodkova ◽  
◽  
...  
Keyword(s):  
Patient Management ◽  
Screening Program ◽  
Clinical Stage ◽  
Biomechanical Properties ◽  
Corvis St ◽  
Stage Of Development ◽  
Biomechanical Parameters ◽  
The Impact ◽  
Biomechanical Measurements ◽  
Corneal Biomechanical Properties

Purpose. To analyse keratopographic and biomechanical corneal indicators with the diagnostic results assessment of the influence on the treatment tactics of myopic refraction patient. Materials and methods. Keratotopographic and biomechanical parameters of the cornea in a patient with mild myopia were evaluated. Results. The Belin/Ambrosio (Enchanced Ectasia Display) - BAD keratoconus screening program was used on Pentacam HR, which did not reveal corneal pathology. According to the results of CBI (Corvis biomechanical index) on Corvis ST (OD - 0.61, OS - 0.48), that was indicating poor corneal biomechanical properties and a high risk of keratectasia development. Conclusion. Ophthalmic examination, using The Corvis ST (Oculus, Germany) biomechanical measurements, makes possible to reveal with greater sensitivity subclinical signs of a keratectatic process at the pre-clinical stage of development. Key words: keratotopography, corneal biomechanics, keratoconus.

Relationship between novel intraocular pressure measurement from Corvis ST and central corneal thickness and corneal hysteresis

2019 ◽  
Vol 104 (4) ◽  
pp. 563-568 ◽  
Author(s):  
Masato Matsuura ◽  
Hiroshi Murata ◽  
Yuri Fujino ◽  
Mieko Yanagisawa ◽  
Yoshitaka Nakao ◽  
...  
Keyword(s):  
Intraocular Pressure ◽  
Central Corneal Thickness ◽  
Linear Regression Analysis ◽  
Corneal Thickness ◽  
Biomechanical Properties ◽  
Applanation Tonometry ◽  
Corneal Hysteresis ◽  
Corneal Resistance Factor ◽  
Corvis St ◽  
The Relationship

AimsCorvis ST (CST) yields biomechanical corrected IOP (bIOP) which is purported to be less dependent on biomechanical properties. In our accompanied paper, it was suggested that the repeatability of bIOP is high. The purpose of the current study was to assess the relationship between intraocular pressure (IOP) measured with CST and central corneal thickness (CCT) and corneal hysteresis (CH), in comparison with IOP measured with Goldmann applanation tonometry (GAT) and the ocular response analyzer (ORA).MethodsA total of 141 eyes from 141 subjects (35 healthy eyes and 106 glaucomatous eyes) underwent IOP measurements with GAT, CST and ORA. The relationships between IOP measurements (ORA-IOPg, ORA-IOPcc, CST-bIOP and GAT IOP) and biomechanical properties (CCT, CH and corneal resistance factor (CRF)) were analysed using the linear regression analysis.ResultsIOPg, IOPcc and GAT IOP were significantly associated with CCT (p<0.001), whereas bIOP was not significantly associated with CCT (p=0.19). IOPg, bIOP and GAT IOP were significantly associated with CH (IOPg: p<0.001; bIOP: p<0.001; GAT IOP: p=0.0054), whereas IOPcc was not significantly associated with CH (p=0.18). All of IOP records were associated with CRF (p<0.001).ConclusionThe bIOP measurement from CST is independent from CCT, but dependent on CH and CRF.

scholarly journals Influence of dextran solution and corneal collagen crosslinking on Corneal Biomechanical Parameters Evaluated by Corvis ST

2021 ◽  
Author(s):  
Xiao Qin ◽  
Lei Tian ◽  
Hui Zhang ◽  
Di Zhang ◽  
Li-Li Guo ◽  
...  
Keyword(s):  
Biomechanical Properties ◽  
Control Group ◽  
Corvis St ◽  
Collagen Crosslinking ◽  
Corneal Collagen Crosslinking ◽  
Biomechanical Parameters ◽  
Dextran Solution ◽  
Corneal Biomechanical Properties ◽  
Porcine Eyes ◽  
Corneal Collagen

Abstract Purpose: To analyze the influence of dextran solution and corneal collagen crosslinking (CXL) on corneal biomechanical parameters evaluated by Corneal Visualization Scheimpflug Technology (Corvis ST). Materials and Methods: Forty porcine eyes were included in this study. Twenty porcine eyes were soaked in dextran solution for 30 minutes (10 eyes in 2% dextran solution and 10 eyes in 20% dextran solution). CXL treatment was performed in 10 porcine eyes, the other 10 porcine eyes were regarded as a control group. Each eye was fixed on an experimental inflation platform to carry out Corvis measurements at different IOPs. Corneal biomechanical parameters were calculated based on Corvis measurement. Statistical analysis was used to analyze the influence of dextran solution and CXL on corneal biomechanical parameters based on Corvis parameters. Results: Corneal energy absorbed area (Aabsorbed) decreased after being soaked in dextran solution under IOP of 15 mmHg; Corneal elastic modulus (E) decreased after being soaked in 2% dextran solution and increased after being soaked in 20% dextran solution; SP-A1 increased after CXL. Conclusion: Both dextran solution and CXL can change corneal biomechanical properties; SP-A1 may be used as an effective parameter for the evaluation of CXL.

Ocular Response Analyser — a New Diagnostic Tool to Measure Corneal Biomechanical Properties and Intraocular Pressure

1970 ◽  
Vol 12 (3) ◽  
pp. 159-168
Author(s):  
Arulmozhi Varman ◽  
Muthuraman Chockalingam
Keyword(s):  
Intraocular Pressure ◽  
Diagnostic Tool ◽  
Pressure Measurement ◽  
Corneal Thickness ◽  
Biomechanical Properties ◽  
Ocular Diseases ◽  
Wide Range ◽  
Corneal Biomechanical Properties ◽  
Ocular Response Analyser

Corneal biomechanical properties have been known to influence the outcome of ocular measurements and procedures for a wide range of ocular diseases. The assessment of corneal biomechanical properties has been a challenge and, for this reason, measurement of the geographical parameters of the cornea, namely corneal thickness and topography, has formed the mainstay of understanding the basis of various ocular pathologies. A newly marketed instrument, the Reichert ocular response analyser has been developed to improve the accuracy of intraocular pressure measurement by uniquely measuring and integrating corneal biomechanical data into its intraocular pressure estimates.

scholarly journals Applications of Scheimpflug Imaging in Glaucoma Management: Current and Potential Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Alexander T. Nguyen ◽  
Tiffany Liu ◽  
Ji Liu
Keyword(s):  
Intraocular Pressure ◽  
Image Reconstruction ◽  
Central Corneal Thickness ◽  
Corneal Thickness ◽  
Anterior Segment ◽  
Three Dimensional ◽  
Biomechanical Properties ◽  
Scheimpflug Imaging ◽  
Potential Applications ◽  
Corneal Biomechanical Properties

Scheimpflug photography is the basis for a variety of imaging devices that are highly versatile. The applications of Scheimpflug imaging are wide in scope, spanning from evaluation of corneal ectasia to quantifying density in nuclear sclerotic cataracts. The potential uses for Scheimpflug-based devices are expanding and a number of them are relevant in glaucoma. In particular, they can provide three-dimensional image reconstruction of the anterior segment which includes assessment of the iridocorneal angle. Photographic analyses allow also for a noncontact method of estimating central corneal thickness (CCT) and intraocular pressure (IOP), as well as the study of various corneal biomechanical properties, which may be useful for stratifying glaucoma risk.

Sign in / Sign up

Export Citation Format

Share Document