scholarly journals A Subgrid Parameterization for Wind Turbines in Weather Prediction Models with an Application to Wind Resource Limits

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
B. H. Fiedler ◽  
A. S. Adams
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Prediction Models ◽  
Weather Prediction ◽  
Electrical Power ◽  
Power Production ◽  
Wind Resource

A subgrid parameterization is offered for representing wind turbines in weather prediction models. The parameterization models the drag and mixing the turbines cause in the atmosphere, as well as the electrical power production the wind causes in the wind turbines. The documentation of the parameterization is complete; it does not require knowledge of proprietary data of wind turbine characteristics. The parameterization is applied to a study of wind resource limits in a hypothetical giant wind farm. The simulated production density was found not to exceed1 W m−2, peaking at a deployed capacity density of5 W m−2and decreasing slightly as capacity density increased to20 W m−2.

scholarly journals A Study of the Impact of Pitch Misalignment on Wind Turbine Performance

Machines ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 8 ◽  
Author(s):  
Davide Astolfi
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Reactive Power ◽  
Power Production ◽  
Test Case ◽  
Before And After ◽  
Input Variables ◽  
The Impact

Pitch angle control is the most common means of adjusting the torque of wind turbines. The verification of its correct function and the optimization of its control are therefore very important for improving the efficiency of wind kinetic energy conversion. On these grounds, this work is devoted to studying the impact of pitch misalignment on wind turbine power production. A test case wind farm sited onshore, featuring five multi-megawatt wind turbines, was studied. On one wind turbine on the farm, a maximum pitch imbalance between the blades of 4.5 ° was detected; therefore, there was an intervention for recalibration. Operational data were available for assessing production improvement after the intervention. Due to the non-stationary conditions to which wind turbines are subjected, this is generally a non-trivial problem. In this work, a general method was formulated for studying this kind of problem: it is based on the study, before and after the upgrade, of the residuals between the measured power output and a reliable model of the power output itself. A careful formulation of the model is therefore crucial: in this work, an automatic feature selection algorithm based on stepwise multivariate regression was adopted, and it allows identification of the most meaningful input variables for a multivariate linear model whose target is the power of the wind turbine whose pitch has been recalibrated. This method can be useful, in general, for the study of wind turbine power upgrades, which have been recently spreading in the wind energy industry, and for the monitoring of wind turbine performances. For the test case of interest, the power of the recalibrated wind turbine is modeled as a linear function of the active and reactive power of the nearby wind turbines, and it is estimated that, after the intervention, the pitch recalibration provided a 5.5% improvement in the power production below rated power. Wind turbine practitioners, in general, should pay considerable attention to the pitch imbalance, because it increases loads and affects the residue lifetime; in particular, the results of this study indicate that severe pitch misalignment can heavily impact power production.

scholarly journals Results from a wake-steering experiment at a commercial wind plant: investigating the wind speed dependence of wake-steering performance

2021 ◽  
Vol 6 (6) ◽  
pp. 1427-1453
Author(s):  
Eric Simley ◽  
Paul Fleming ◽  
Nicolas Girard ◽  
Lucas Alloin ◽  
Emma Godefroy ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Direction ◽  
Wind Farm ◽  
Poor Performance ◽  
Power Production ◽  
Wind Rose ◽  
Wind Speeds ◽  
Variability Model

Abstract. Wake steering is a wind farm control strategy in which upstream wind turbines are misaligned with the wind to redirect their wakes away from downstream turbines, thereby increasing the net wind plant power production and reducing fatigue loads generated by wake turbulence. In this paper, we present results from a wake-steering experiment at a commercial wind plant involving two wind turbines spaced 3.7 rotor diameters apart. During the 3-month experiment period, we estimate that wake steering reduced wake losses by 5.6 % for the wind direction sector investigated. After applying a long-term correction based on the site wind rose, the reduction in wake losses increases to 9.3 %. As a function of wind speed, we find large energy improvements near cut-in wind speed, where wake steering can prevent the downstream wind turbine from shutting down. Yet for wind speeds between 6–8 m/s, we observe little change in performance with wake steering. However, wake steering was found to improve energy production significantly for below-rated wind speeds from 8–12 m/s. By measuring the relationship between yaw misalignment and power production using a nacelle lidar, we attribute much of the improvement in wake-steering performance at higher wind speeds to a significant reduction in the power loss of the upstream turbine as wind speed increases. Additionally, we find higher wind direction variability at lower wind speeds, which contributes to poor performance in the 6–8 m/s wind speed bin because of slow yaw controller dynamics. Further, we compare the measured performance of wake steering to predictions using the FLORIS (FLOw Redirection and Induction in Steady State) wind farm control tool coupled with a wind direction variability model. Although the achieved yaw offsets at the upstream wind turbine fall short of the intended yaw offsets, we find that they are predicted well by the wind direction variability model. When incorporating the expected yaw offsets, estimates of the energy improvement from wake steering using FLORIS closely match the experimental results.

scholarly journals Wind Turbine Anomaly Identification Based on Improved Deep Belief Network with SCADA Data

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Xiafei Long ◽  
Shengqing Li ◽  
Xiwen Wu ◽  
Zhao Jin
Keyword(s):  
Fault Diagnosis ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Domain Knowledge ◽  
Wind Farm ◽  
Prediction Models ◽  
Moving Average ◽  
Pearson Correlation ◽  
Whale Optimization

This article presents a novel fault diagnosis algorithm based on the whale optimization algorithm (WOA)-deep belief networks (DBN) for wind turbines (WTs) using the data collected from the supervisory control and data acquisition (SCADA) system. Through the domain knowledge and Pearson correlation, the input parameters of the prediction models are selected. Three different types of prediction models, namely, the wind turbine, the wind power gearbox, and the wind power generator, are used to predict the health condition of the WT equipment. In this article, the prediction accuracy of the models built with these SCADA sample data is discussed. In order to implement fault monitoring and abnormal state determination of the wind power equipment, the exponential weighted moving average (EWMA) threshold is used to monitor the trend of reconstruction errors. The proposed method is used for 2 MW wind turbines with doubly fed induction generators in a real-world wind farm, and experimental results show that the proposed method is effective in the fault diagnosis of wind turbines.

scholarly journals Results from a Wake Steering Experiment at a Commercial Wind Plant: Investigating the Wind Speed Dependence of Wake Steering Performance

2021 ◽  
Author(s):  
Eric Simley ◽  
Paul Fleming ◽  
Nicolas Girard ◽  
Lucas Alloin ◽  
Emma Godefroy ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Direction ◽  
Wind Farm ◽  
Poor Performance ◽  
Power Production ◽  
Wind Rose ◽  
Wind Speeds ◽  
Variability Model

Abstract. Wake steering is a wind farm control strategy in which upstream wind turbines are misaligned with the wind to redirect their wakes away from downstream turbines, thereby increasing the net wind plant power production and reducing fatigue loads generated by wake turbulence. In this paper, we present results from a wake steering experiment at a commercial wind plant involving two wind turbines spaced 3.7 rotor diameters apart. During the three-month experiment period, we estimate that wake steering reduced wake losses by 5.7 % for the wind direction sector investigated. After applying a long-term correction based on the site wind rose, the reduction in wake losses increases to 9.8 %. As a function of wind speed, we find large energy improvements near cut-in wind speed, where wake steering can prevent the downstream wind turbine from shutting down. Yet for wind speeds between 6–8 m/s, we observe little change in performance with wake steering. However, wake steering was found to improve energy production significantly for below-rated wind speeds from 8–12 m/s. By measuring the relationship between yaw misalignment and power production using a nacelle lidar, we attribute much of the improvement in wake steering performance at higher wind speeds to a significant reduction in the power loss of the upstream turbine as wind speed increases. Additionally, we find higher wind direction variability at lower wind speeds, which contributes to poor performance in the 6–8 m/s wind speed bin because of slow yaw controller dynamics. Further, we compare the measured performance of wake steering to predictions using the FLORIS (FLOw Redirection and Induction in Steady State) wind farm control tool coupled with a wind direction variability model. Although the achieved yaw offsets at the upstream wind turbine fall short of the intended yaw offsets, we find that they are predicted well by the wind direction variability model. When incorporating the predicted achieved yaw offsets, estimates of the energy improvement from wake steering using FLORIS closely match the experimental results.

Modelling windfarm wakes in operational forecasting model HARMONIE-AROME

2021 ◽  
Author(s):  
Natalie Theeuwes ◽  
Bart van Stratum ◽  
Bert van Ulft ◽  
Jan Barkmeijer ◽  
Sukanta Basu ◽  
...  
Keyword(s):  
Wind Farm ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Weather Prediction ◽  
Wind Farms ◽  
Power Production ◽  
The European Union ◽  
The North ◽  
Temperature And Humidity ◽  
Monthly Weather Review

<p>Wind power production in the European Union (EU) is steadily increasing, specifically on the North-Sea. Wind farms are growing both in number and size, while weather models evolve to higher resolutions. This means that the effect of wind farms can no longer be ignored by weather prediction models. Wind farms essentially decelerate the wind (blockage and wake effects) and increase turbulence, indirectly influencing temperature and humidity. In this study, we have included the widely used Fitch et al. (2012) windfarm parameterisation in the operational mesoscale model HARMONIE-AROME. Using our method, we are able to include individual turbines both on- and offshore. The model is evaluated using various datasets, e.g. production data from Elia (Belgium), floating lidar measurements at Borssele Wind Farm, and anemometer measurements from the FINO-towers. The inclusion of the windfarm parameterisation improves the wind forecast near wind farms, also improving the estimate in power production. In addition, we are able to model the effects of wind farms on the boundary-layer temperature and humidity.</p><p>Fitch, A. C., Olson, J. B., Lundquist, J. K., Dudhia, J., Gupta, A. K., Michalakes, J., & Barstad, I. (2012). Local and mesoscale impacts of wind farms as parameterized in a mesoscale NWP model. Monthly Weather Review, 140(9), 3017–3038.</p>

scholarly journals Evaluation of Wind Resources and the Effect of Market Price Components on Wind-Farm Income: A Case Study of Ørland in Norway

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2955 ◽  
Author(s):  
Ali Marjan ◽  
Mahmood Shafiee
Keyword(s):  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Wind Farm ◽  
Market Price ◽  
Real Data ◽  
Power Production ◽  
Power Measurement ◽  
Farm Income ◽  
Wind Resources

This paper aims to present a detailed analysis of the performance of a wind-farm using the wind turbine power measurement standard IEC61400-12-1 (2017). Ten minutes averaged wind data are obtained from LIDAR over the period of twelve months and it is compared with the 38 years’ data from weather station with the objective of determining the wind resources at the wind-farm. The performance of one of the wind turbines located in the wind-farm is assessed by comparing the wind power potential of the wind turbine with its actual power production. Our analysis shows that the wind farm under study is rated as ‘good’ in terms of wind power production and has wind power density of 479 W/m2. The annual wind-farm’s income is estimated based on the real-data collected from the wind turbines. The effect of price of electricity and the spot prices of Norwegian-Swedish green certificate on the income will be illustrated by means of a Monte-Carlo Simulation (MCS) approach. Our study provides a different perspective of wind resource evaluation by analyzing LIDAR measurements using Windographer and combines it with the lesser explored effects of price components on the income using statistical tools.

Fatigue Life Analysis of Offshore Wind Turbine Support Structures in an Offshore Wind Farm

2018 ◽  
Author(s):  
Bryan Nelson ◽  
Yann Quéméner
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
The Body ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Analysis Tool ◽  
Support Structures ◽  
Offshore Wind Farm ◽  
Actuator Disk

This study evaluated, by time-domain simulations, the fatigue lives of several jacket support structures for 4 MW wind turbines distributed throughout an offshore wind farm off Taiwan’s west coast. An in-house RANS-based wind farm analysis tool, WiFa3D, has been developed to determine the effects of the wind turbine wake behaviour on the flow fields through wind farm clusters. To reduce computational cost, WiFa3D employs actuator disk models to simulate the body forces imposed on the flow field by the target wind turbines, where the actuator disk is defined by the swept region of the rotor in space, and a body force distribution representing the aerodynamic characteristics of the rotor is assigned within this virtual disk. Simulations were performed for a range of environmental conditions, which were then combined with preliminary site survey metocean data to produce a long-term statistical environment. The short-term environmental loads on the wind turbine rotors were calculated by an unsteady blade element momentum (BEM) model of the target 4 MW wind turbines. The fatigue assessment of the jacket support structure was then conducted by applying the Rainflow Counting scheme on the hot spot stresses variations, as read-out from Finite Element results, and by employing appropriate SN curves. The fatigue lives of several wind turbine support structures taken at various locations in the wind farm showed significant variations with the preliminary design condition that assumed a single wind turbine without wake disturbance from other units.

scholarly journals Correlations of power output fluctuations in an offshore wind farm using high-resolution SCADA data

2021 ◽  
Vol 6 (4) ◽  
pp. 997-1014
Author(s):  
Janna Kristina Seifert ◽  
Martin Kraft ◽  
Martin Kühn ◽  
Laura J. Lukassen
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Flow Conditions ◽  
Output Fluctuations ◽  
Power Difference ◽  
Time Correlations

Abstract. Space–time correlations of power output fluctuations of wind turbine pairs provide information on the flow conditions within a wind farm and the interactions of wind turbines. Such information can play an essential role in controlling wind turbines and short-term load or power forecasting. However, the challenges of analysing correlations of power output fluctuations in a wind farm are the highly varying flow conditions. Here, we present an approach to investigate space–time correlations of power output fluctuations of streamwise-aligned wind turbine pairs based on high-resolution supervisory control and data acquisition (SCADA) data. The proposed approach overcomes the challenge of spatially variable and temporally variable flow conditions within the wind farm. We analyse the influences of the different statistics of the power output of wind turbines on the correlations of power output fluctuations based on 8 months of measurements from an offshore wind farm with 80 wind turbines. First, we assess the effect of the wind direction on the correlations of power output fluctuations of wind turbine pairs. We show that the correlations are highest for the streamwise-aligned wind turbine pairs and decrease when the mean wind direction changes its angle to be more perpendicular to the pair. Further, we show that the correlations for streamwise-aligned wind turbine pairs depend on the location of the wind turbines within the wind farm and on their inflow conditions (free stream or wake). Our primary result is that the standard deviations of the power output fluctuations and the normalised power difference of the wind turbines in a pair can characterise the correlations of power output fluctuations of streamwise-aligned wind turbine pairs. Further, we show that clustering can be used to identify different correlation curves. For this, we employ the data-driven k-means clustering algorithm to cluster the standard deviations of the power output fluctuations of the wind turbines and the normalised power difference of the wind turbines in a pair. Thereby, wind turbine pairs with similar power output fluctuation correlations are clustered independently from their location. With this, we account for the highly variable flow conditions inside a wind farm, which unpredictably influence the correlations.

Health Assessment Methods for Wind Turbines Based on Power Prediction and Mahalanobis Distance

2018 ◽  
Vol 33 (02) ◽  
pp. 1951001 ◽  
Author(s):  
Jun Zhan ◽  
Ronglin Wang ◽  
Lingzhi Yi ◽  
Yaguo Wang ◽  
Zhengjuan Xie
Keyword(s):  
Health Status ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Mahalanobis Distance ◽  
Wind Farm ◽  
Health Status Assessment ◽  
Power Prediction ◽  
Residual Set ◽  
Scada System ◽  
Status Assessment

The output power of wind turbine has great relation with its health state, and the health status assessment for wind turbines influences operational maintenance and economic benefit of wind farm. Aiming at the current problem that the health status for the whole machine in wind farm is hard to get accurately, in this paper, we propose a health status assessment method in order to assess and predict the health status of the whole wind turbine, which is based on the power prediction and Mahalanobis distance (MD). Firstly, on the basis of Bates theory, the scientific analysis for historical data from SCADA system in wind farm explains the relation between wind power and running states of wind turbines. Secondly, the active power prediction model is utilized to obtain the power forecasting value under the health status of wind turbines. And the difference between the forecasting value and actual value constructs the standard residual set which is seen as the benchmark of health status assessment for wind turbines. In the process of assessment, the test set residual is gained by network model. The MD is calculated by the test residual set and normal residual set and then normalized as the health status assessment value of wind turbines. This method innovatively constructs evaluation index which can reflect the electricity generating performance of wind turbines rapidly and precisely. So it effectively avoids the defect that the existing methods are generally and easily influenced by subjective consciousness. Finally, SCADA system data in one wind farm of Fujian province has been used to verify this method. The results indicate that this new method can make effective assessment for the health status variation trend of wind turbines and provide new means for fault warning of wind turbines.

Sign in / Sign up

Export Citation Format

Share Document