scholarly journals A Nonsingular Terminal Sliding Mode Approach Using Adaptive Disturbance Observer for Finite-Time Trajectory Tracking of MEMS Triaxial Vibratory Gyroscope

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Wei Wang ◽  
Qing Zhao ◽  
Yuxin Zhao ◽  
Dongzhen Du

This paper develops a nonsingular terminal sliding mode controller (NTSMC) with adaptive disturbance observer (ADOB) for finite-time trajectory tracking of a MEMS triaxial vibratory gyroscope, which has parameter variations and external high-amplitude disturbance. A novel sliding mode controller with adaptive disturbance observer is designed to reconfigure the parameter variations and external high-amplitude disturbance and reduce the chattering phenomenon on the sliding surface greatly through setting the switching gain in control signal as a smaller value. The disturbance adaptive law is derived to guarantee the stability of the closed-loop adaptive control system via the Lyapunov criterion. The simulation results are performed to verify the effectiveness of the presented schemes.

2020 ◽  
pp. 107754632092526
Author(s):  
Amir Razzaghian ◽  
Reihaneh Kardehi Moghaddam ◽  
Naser Pariz

This study investigates a novel fractional-order nonsingular terminal sliding mode controller via a finite-time disturbance observer for a class of mismatched uncertain nonlinear systems. For this purpose, a finite-time disturbance observer–based fractional-order nonsingular terminal sliding surface is proposed, and the corresponding control law is designed using the Lyapunov stability theory to satisfy the sliding condition in finite time. The proposed fractional-order nonsingular terminal sliding mode control based on a finite-time disturbance observer exhibits better control performance; guarantees finite-time convergence, robust stability of the closed-loop system, and mismatched disturbance rejection; and alleviates the chattering problem. Finally, the effectiveness of the proposed fractional-order robust controller is illustrated via simulation results of both the numerical and application examples which are compared with the fractional-order nonsingular terminal sliding mode controller, sliding mode controller based on a disturbance observer, and integral sliding mode controller methods.


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Xing Fang ◽  
Fei Liu

A novel full-order terminal sliding-mode controller (FOTSMC) based on the finite-time disturbance observer (FTDO) is proposed for the “JIAOLONG” manned submersible with lumped disturbances. First, a finite-time disturbance observer (FTDO) is developed to estimate the lumped disturbances including the external disturbances and model uncertainties. Second, a full-order terminal sliding-mode surface is designed for the manned submersible, whose sliding-mode motion behaves as full-order dynamics rather than reduced-order dynamics in conventional sliding-mode control systems. Then, a continuous sliding-mode control law is developed to avoid chattering phenomenon, as well as to drive the system outputs to the desired reference trajectory in finite time. Furthermore, the closed-loop system stability analysis is given by Lyapunov theory. Finally, the simulation results demonstrate the satisfactory tracking performance and excellent disturbance rejection capability of the proposed finite-time disturbance observer based full-order terminal sliding-mode control (FTDO-FOTSMC) method.


Author(s):  
Qun Zong ◽  
Xiuyun Zhang ◽  
Shikai Shao ◽  
Bailing Tian ◽  
Wenjing Liu

In this paper, finite-time fault-tolerant attitude tracking control is investigated for rigid spacecraft system with external disturbances, inertia uncertainties and actuator faults. A novel finite-time disturbance observer combined with a nonsingular terminal sliding mode controller is developed. Using an equivalent output error injection approach, a finite-time disturbance observer with simple structure is firstly designed to estimate lumped uncertainty. Then, to remove the requirement of prior knowledge about lumped uncertainty and reduce chattering, an adaptive finite-time disturbance observer is further proposed, and the estimations converge to the neighborhood of the true values. Based on the designed observer, a unified finite-time attitude controller is obtained automatically. Finally, both additive and multiplicative faults are considered for simulations and the results illustrate the great fault-tolerant capability of the proposed scheme.


2021 ◽  
pp. 107754632098819
Author(s):  
Maryam Jafari ◽  
Saleh Mobayen ◽  
Hubert Roth ◽  
Farhad Bayat

The aim of this article is to design a nonsingular terminal sliding mode control method based on disturbance observer for the stabilization of the micro-electro-mechanical systems under lumped perturbation. By using the nonsingular terminal sliding mode control scheme, the state trajectories of the system achieve the switching surface and approach to the origin in the finite time. Also, by utilizing the disturbance observer, the finite-time convergence of disturbance error is assured. In the process of design, the optimized coefficients of the sliding surface are calculated in the form of linear matrix inequality. Simulation results for a micro-electro-mechanical gyroscope are illustrated to exhibit the validity of the planned approach in comparison with the other methods.


IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 152116-152130
Author(s):  
Bahman Eskandari ◽  
Amin Yusefpour ◽  
Moosa Ayati ◽  
Jorma Kyyra ◽  
Edris Pouresmaeil

2019 ◽  
Vol 42 (5) ◽  
pp. 1047-1058 ◽  
Author(s):  
Amin Yousefpour ◽  
Amin Vahidi-Moghaddam ◽  
Arman Rajaei ◽  
Moosa Ayati

This article is concerned with suppression of nonlinear forced vibration of a single-wall carbon nanotube conveying fluid based on the nonlocal elasticity theory and Euler–Bernoulli beam theory. Electrostatic actuation is considered as the control force for the suppression of carbon nanotube. Based on Galerkin approach, the governing nonlinear partial differential equation is reduced to an ordinary one. Since the sliding mode controller (SMC) does not assures finite time system stabilization and also causes chattering in the control input and consequently vibration in the system, terminal sliding mode controller (TSMC) is developed for the stabilization of carbon nanotube based on a disturbance observer. TSMC and disturbance observer suppress the vibrations of nanotube in the presence of external disturbances caused by the internal flow. Numerical simulation results are presented to illustrate the effectiveness and performance of the proposed control scheme in comparison to similar approaches. Simulation results show that the proposed control method successfully stabilizes the uncertain system in a finite time.


2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Hong-Ru Li ◽  
Zhi-Bin Jiang ◽  
Nan Kang

This paper investigates the position regulation problem of permanent magnet synchronous motor (PMSM) subject to parameter uncertainties and external disturbances. A novel fractional second-order nonsingular terminal sliding mode control (F2NTSMC) is proposed and the finite time stability of the closed-loop system is ensured. A sliding mode disturbance observer (SMDO) is developed to estimate and make feedforward compensation for the lumped disturbances of the PMSM system. Moreover, the finite-time convergence of estimation errors can be guaranteed. The control scheme combining F2NTSMC and SMDO can not only improve performance of the closed-loop system and attenuate disturbances, but also reduce chattering effectively. Simulation results show that the proposed control method can obtain satisfactory position tracking performance and strong robustness.


2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Gang Wu ◽  
Ke Zhang

Given the resolution of the guidance for intercepting highly maneuvering targets, a novel finite-time convergent guidance law is proposed, which takes the following conditions into consideration, including the impact angle constraint, the guidance command input saturation constraint, and the autopilot second-order dynamic characteristics. Firstly, based on the nonsingular terminal sliding mode control theory, a finite-time convergent nonsingular terminal sliding mode surface is designed. On the back of the backstepping control method, the virtual control law appears. A nonlinear first-order filter is constructed so as to address the “differential expansion” problem in traditional backstepping control. By designing an adaptive auxiliary system, the guidance command input saturation problem is dealt with. The RBF neural network disturbance observer is used for estimating the unknown boundary external disturbances of the guidance system caused by the target acceleration. The parameters of the RBF neural network are adjusted online in real time, for the purpose of improving the estimation accuracy of the RBF neural network disturbance observer and accelerating its convergence characteristics. At the same time, an adaptive law is designed to compensate the estimation error of the RBF neural network disturbance observer. Then, the Lyapunov stability theory is used to prove the finite-time stability of the guidance law. Finally, numerical simulations verify the effectiveness and superiority of the proposed guidance law.


Sign in / Sign up

Export Citation Format

Share Document