scholarly journals Advances and Prospects in Stem Cells for Cartilage Regeneration

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Mingjie Wang ◽  
Zhiguo Yuan ◽  
Ning Ma ◽  
Chunxiang Hao ◽  
Weimin Guo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Regenerative Medicine ◽  
Cartilage Repair ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Emerging Trends ◽  
Systematic Understanding

The histological features of cartilage call attention to the fact that cartilage has a little capacity to repair itself owing to the lack of a blood supply, nerves, or lymphangion. Stem cells have emerged as a promising option in the field of cartilage tissue engineering and regenerative medicine and could lead to cartilage repair. Much research has examined cartilage regeneration utilizing stem cells. However, both the potential and the limitations of this procedure remain controversial. This review presents a summary of emerging trends with regard to using stem cells in cartilage tissue engineering and regenerative medicine. In particular, it focuses on the characterization of cartilage stem cells, the chondrogenic differentiation of stem cells, and the various strategies and approaches involving stem cells that have been used in cartilage repair and clinical studies. Based on the research into chondrocyte and stem cell technologies, this review discusses the damage and repair of cartilage and the clinical application of stem cells, with a view to increasing our systematic understanding of the application of stem cells in cartilage regeneration; additionally, several advanced strategies for cartilage repair are discussed.

scholarly journals Translational Application of 3D Bioprinting for Cartilage Tissue Engineering

2021 ◽  
Vol 8 (10) ◽  
pp. 144
Author(s):  
Sophie McGivern ◽  
Halima Boutouil ◽  
Ghayadah Al-Kharusi ◽  
Suzanne Little ◽  
Nicholas J. Dunne ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cartilage Repair ◽  
Treatment Options ◽  
Cartilage Damage ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Bioactive Molecules ◽  
Cartilage Tissue ◽  
Layer By Layer ◽  
3D Bioprinting

Cartilage is an avascular tissue with extremely limited self-regeneration capabilities. At present, there are no existing treatments that effectively stop the deterioration of cartilage or reverse its effects; current treatments merely relieve its symptoms and surgical intervention is required when the condition aggravates. Thus, cartilage damage remains an ongoing challenge in orthopaedics with an urgent need for improved treatment options. In recent years, major advances have been made in the development of three-dimensional (3D) bioprinted constructs for cartilage repair applications. 3D bioprinting is an evolutionary additive manufacturing technique that enables the precisely controlled deposition of a combination of biomaterials, cells, and bioactive molecules, collectively known as bioink, layer-by-layer to produce constructs that simulate the structure and function of native cartilage tissue. This review provides an insight into the current developments in 3D bioprinting for cartilage tissue engineering. The bioink and construct properties required for successful application in cartilage repair applications are highlighted. Furthermore, the potential for translation of 3D bioprinted constructs to the clinic is discussed. Overall, 3D bioprinting demonstrates great potential as a novel technique for the fabrication of tissue engineered constructs for cartilage regeneration, with distinct advantages over conventional techniques.

scholarly journals Articular cartilage tissue engineering with stem cells implanted onto nanoscaffolds and platelet-rich plasma

2017 ◽  
Vol 3 (3) ◽  
pp. 322
Author(s):  
Hadeer A. Abbassy ◽  
Laila M. Montaser ◽  
Sherin M. Fawzy
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Articular Cartilage ◽  
Soft Tissues ◽  
Platelet Rich Plasma ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Cartilage Defects ◽  
Great Promise

<p class="abstract">Musculoskeletal medicine targets both cartilage regeneration and healing of soft tissues. Articular cartilage repair and regeneration is primarily considered to be due to its poor regenerative properties. Cartilage defects due to joint injury, aging, or osteoarthritis have low self-repair ability thus they are most often irreversible as well as being a major cause of joint pain and chronic disability. Unfortunately, current methods do not seamlessly restore hyaline cartilage and may lead to the formation of fibro- or continue hypertrophic cartilage. Deficiency of efficient modalities of therapy has invited research to combine stem cells, scaffold materials and environmental factors through tissue engineering. Articular cartilage tissue engineering aims to repair, regenerate, and hence improve the function of injured or diseased cartilage. This holds great potential and has evoked intense interest in improving cartilage therapy. Platelet-rich plasma (PRP) and/or stem cells may be influential for tissue repair as well as cartilage regenerative processes.  A great promise to advance current cartilage therapies toward achieving a consistently successful modality has been held for addressing cartilage afflictions. The use of stem cells, novel biologically inspired scaffolds and, emerging nanotechnology may be the best way to reach this objective via tissue engineering. A current and emergent approach in the field of cartilage tissue engineering is explained in this review for specific application. In the future, the development of new strategies using stem cells seeded in scaffolds and the culture medium supplemented with growth factors could improve the quality of the newly formed cartilage<span lang="EN-IN">.</span></p>

scholarly journals HIF-1α as a Regulator of BMP2-Induced Chondrogenic Differentiation, Osteogenic Differentiation, and Endochondral Ossification in Stem Cells

2015 ◽  
Vol 36 (1) ◽  
pp. 44-60 ◽  
Author(s):  
Nian Zhou ◽  
Ning Hu ◽  
Jun-Yi Liao ◽  
Liang-Bo Lin ◽  
Chen Zhao ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Osteogenic Differentiation ◽  
Cartilage Repair ◽  
Chondrogenic Differentiation ◽  
Endochondral Ossification ◽  
Cartilage Tissue Engineering ◽  
Bone Morphogenetic Protein 2 ◽  
Cartilage Tissue ◽  
Cartilage Formation

Background/Aims: Joint cartilage defects are difficult to treat due to the limited self-repair capacities of cartilage. Cartilage tissue engineering based on stem cells and gene enhancement is a potential alternative for cartilage repair. Bone morphogenetic protein 2 (BMP2) has been shown to induce chondrogenic differentiation in mesenchymal stem cells (MSCs); however, maintaining the phenotypes of MSCs during cartilage repair since differentiation occurs along the endochondral ossification pathway. In this study, hypoxia inducible factor, or (HIF)-1α, was determined to be a regulator of BMP2-induced chondrogenic differentiation, osteogenic differentiation, and endochondral bone formation. Methods: BMP2 was used to induce chondrogenic and osteogenic differentiation in stem cells and fetal limb development. After HIF-1α was added to the inducing system, any changes in the differentiation markers were assessed. Results: HIF-1α was found to potentiate BMP2-induced Sox9 and the expression of chondrogenesis by downstream markers, and inhibit Runx2 and the expression of osteogenesis by downstream markers in vitro. In subcutaneous stem cell implantation studies, HIF-1α was shown to potentiate BMP2-induced cartilage formation and inhibit endochondral ossification during ectopic bone/cartilage formation. In the fetal limb culture, HIF-1α and BMP2 synergistically promoted the expansion of the proliferating chondrocyte zone and inhibited chondrocyte hypertrophy and endochondral ossification. Conclusion: The results of this study indicated that, when combined with BMP2, HIF-1α induced MSC differentiation could become a new method of maintaining cartilage phenotypes during cartilage tissue engineering.

A Chondroitin Sulfate based Injectable Hydrogel for Delivery of Stem Cells in Cartilage Regeneration

2021 ◽  
Author(s):  
Xiaolin Li ◽  
Qian Xu ◽  
Melissa Johnson ◽  
Xi Wang ◽  
Jing Lyu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Chondroitin Sulfate ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Tissue Engineering Scaffolds ◽  
Injectable Hydrogel ◽  
Rapid Degradation

Chondroitin sulfate (CS), as a popular material for cartilage tissue engineering scaffolds, has been extensively studied and reported for its safety and excellent biocompatibility. However, the rapid degradation of pure...

Characterization of Chitosan-Based Scaffolds Seeded with Sheep Nasal Chondrocytes for Cartilage Tissue Engineering

2021 ◽  
Author(s):  
Anamarija Rogina ◽  
Maja Pušić ◽  
Lucija Štefan ◽  
Alan Ivković ◽  
Inga Urlić ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cartilage Tissue Engineering ◽  
Cartilage Tissue

scholarly journals Digital Light Processing Bioprinted Human Chondrocyte-Laden Poly (γ-Glutamic Acid)/Hyaluronic Acid Bio-Ink towards Cartilage Tissue Engineering

Biomedicines ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 714
Author(s):  
Alvin Kai-Xing Lee ◽  
Yen-Hong Lin ◽  
Chun-Hao Tsai ◽  
Wan-Ting Chang ◽  
Tsung-Li Lin ◽  
...  
Keyword(s):  
United States ◽  
Tissue Engineering ◽  
Hyaluronic Acid ◽  
Glutamic Acid ◽  
Cellular Proliferation ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
The United States ◽  
Cartilage Injury ◽  
Cartilage Tissue

Cartilage injury is the main cause of disability in the United States, and it has been projected that cartilage injury caused by osteoarthritis will affect 30% of the entire United States population by the year 2030. In this study, we modified hyaluronic acid (HA) with γ-poly(glutamic) acid (γ-PGA), both of which are common biomaterials used in cartilage engineering, in an attempt to evaluate them for their potential in promoting cartilage regeneration. As seen from the results, γ-PGA-GMA and HA, with glycidyl methacrylate (GMA) as the photo-crosslinker, could be successfully fabricated while retaining the structural characteristics of γ-PGA and HA. In addition, the storage moduli and loss moduli of the hydrogels were consistent throughout the curing durations. However, it was noted that the modification enhanced the mechanical properties, the swelling equilibrium rate, and cellular proliferation, and significantly improved secretion of cartilage regeneration-related proteins such as glycosaminoglycan (GAG) and type II collagen (Col II). The cartilage tissue proof with Alcian blue further demonstrated that the modification of γ-PGA with HA exhibited suitability for cartilage tissue regeneration and displayed potential for future cartilage tissue engineering applications. This study built on the previous works involving HA and further showed that there are unlimited ways to modify various biomaterials in order to further bring cartilage tissue engineering to the next level.

Spidroin Striped Micropattern Promotes Chondrogenic Differentiation of Human Wharton’s Jelly Mesenchymal Stem Cells

2021 ◽  
Author(s):  
Anggraini Barlian ◽  
Dinda Hani’ah Arum Saputri ◽  
Adriel Hernando ◽  
Ekavianty Prajatelistia ◽  
Hutomo Tanoto
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Chondrogenic Differentiation ◽  
Spider Silk ◽  
Cartilage Tissue Engineering ◽  
Wharton’S Jelly ◽  
Cartilage Tissue ◽  
Type Ii ◽  
Wharton's Jelly

Abstract Cartilage tissue engineering, particularly micropattern, can influence the biophysical properties of mesenchymal stem cells (MSCs) leading to chondrogenesis. In this research, human Wharton’s jelly MSCs (hWJ-MSCs) were grown on a striped micropattern containing spider silk protein (spidroin) from Argiope appensa. This research aims to direct hWJ-MSCs chondrogenesis using micropattern made of spidroin bioink as opposed to fibronectin that often used as the gold standard. Cells were cultured on striped micropattern of 500 µm and 1000 µm width sizes without chondrogenic differentiation medium for 21 days. The immunocytochemistry result showed that spidroin contains RGD sequences and facilitates cell adhesion via integrin β1. Chondrogenesis was observed through the expression of glycosaminoglycan, type II collagen, and SOX9. The result on glycosaminoglycan content proved that 1000 µm was the optimal width to support chondrogenesis. Spidroin micropattern induced significantly higher expression of SOX9 mRNA on day-21 and SOX9 protein was located inside the nucleus starting from day-7. COL2A1 mRNA of spidroin micropattern groups was downregulated on day-21 and collagen type II protein was detected starting from day-14. These results showed that spidroin micropattern enhances chondrogenic markers while maintains long-term upregulation of SOX9, and therefore has the potential as a new method for cartilage tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document