scholarly journals Effects of Imposed Damage on the Capillary Water Absorption of Recycled Aggregate Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Qi Gao ◽  
Zhiming Ma ◽  
Jianzhuang Xiao ◽  
Fuan Li
Keyword(s):  
Absorption Coefficient ◽  
Water Absorption ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Capillary Absorption ◽  
Capillary Water ◽  
Aggregate Concrete ◽  
Capillary Water Absorption ◽  
Freeze Thaw ◽  
Loading Level

Capillary water absorption of concrete is closely related to its pore structure, permeability, and durability. This paper intensively investigates the effects of imposed damage, including freeze-thaw damage and loading damage, on the capillary water absorption of recycled aggregate concrete (RAC). Freeze-thaw cycle test, loading test, and the experiment of capillary water absorption were carried out, respectively. The results demonstrate that the addition of recycled coarse aggregate (RCA) results in the increase in the capillary absorption behavior of RAC without imposed damage, and there exists a linear correlation between the behaviors of capillary water absorption and chloride penetration of RAC. The imposed freeze-thaw damage or load damage of RAC boosts with the increase of RCA replacement percentages after suffering the same freeze-thaw cycles or loading level. The imposed freeze-thaw damage and load damage further lead to the increase in the capillary water absorption of RAC, and the capillary absorption coefficient of RAC increases linearly with the increased RCA replacement percentages, after suffering the same freeze-thaw cycles or loading level. Furthermore, capillary absorption coefficient increases linearly with the growth of imposed freeze-thaw damage or load damage degree, which can be used to estimate the capillary absorption behavior of RAC exposed to the extreme environment.

Influence of Water Repellent Surface Impregnation on Water Absorption Properties of Recycled Aggregate Concrete

2011 ◽  
Vol 71-78 ◽  
pp. 5011-5014 ◽  
Author(s):  
Ya Guang Zhu ◽  
Pei Zhen Xu ◽  
Qiu Yi Li ◽  
Chuan Li
Keyword(s):  
Surface Water ◽  
Water Absorption ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Water Repellent ◽  
Capillary Water ◽  
Absorption Properties ◽  
Aggregate Concrete ◽  
Capillary Water Absorption

This paper aimed to investigate the influence of using silane surface water repellent treatment on the capillary water absorption properties of recycled aggregate concrete. In this study, two types of coarse aggregate, natural aggregates and recycled aggregates were used, and the surface water repellent treatment of concrete was produced by brushing 100g/m2 and 200g/m2 of paste. It was found that the silane impregnation depth of recycled concrete was deeper than that of natural concrete, and the surface treatment was more effective in the improvement of capillary water absorption properties of recycled aggregate concrete than the natural aggregate concrete.

scholarly journals Durability Studies on the Recycled Aggregate Concrete in China over the Past Decade: A Review

2019 ◽  
Vol 2019 ◽  
pp. 1-19 ◽  
Author(s):  
Zhiming Ma ◽  
Qin Tang ◽  
Dingyi Yang ◽  
Guangzhong Ba
Keyword(s):  
Water Absorption ◽  
Absorption Rate ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Rapid Urbanization ◽  
Aggregate Concrete ◽  
The Past ◽  
Water Absorption Rate ◽  
Average Water

Since China hosted the Olympic Games in 2008, a mass of construction and demolition (C&D) wastes were produced with the rapid urbanization construction. Recycling the C&D waste into recycled aggregates (RA) is an effective method for reducing the amount of C&D wastes. Many studies on the properties of RA and the durability of recycled aggregate concrete (RAC) were conducted in China over the past decade. Due to the restrictions of various languages, some valuable studies on the durability of RAC are hard to be acquired by the scholars around the world. Therefore, this paper is developed to review the studies on the durability of RAC in China, and the shrinkage behavior, chloride permeability, carbonation behavior, and freeze-thaw resistance of RAC are, respectively, introduced. Considering the waste concrete, bricks, and ceramics used in preparing RA are frequently mixed together in China, this study proposes an index of average water absorption rate to quantify the effects of RA types, quality, and replacement percentages on the durability of RAC. Meanwhile, the relationship between the average water absorption rate of RA and the durability parameters of RAC is established. Finally, the improving methods of RAC durability are introduced, and the RA particle shaping and carbonation modification are emphasized.

The Properties of Fine Recycled Aggregate Concrete Containing Recycled Bricks from Construction and Demolition Waste

2018 ◽  
Vol 760 ◽  
pp. 193-198 ◽  
Author(s):  
Kristina Fořtová ◽  
Tereza Pavlů
Keyword(s):  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Demolition Waste ◽  
Natural Sand ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Recycled Fine Aggregate

This paper presents research results of recycled fine aggregate concrete testing. The main aim of this contribution is verification of properties of fine aggregate concrete with partial replacement of fine natural aggregate by recycled masonry aggregate originated from construction and demolition waste. The influence of partial replacement of natural sand to mechanical properties and freeze-thaw resistance is described. The compressive strength and flexural strength were tested at the age of 28 and 60 days and after 25, 50, 75 and 100 freeze-thaw cycles. Partial replacement of natural sand was 0, 25 and 50 % for all these tests. Prismatic specimens were examined.

Study of Surface Modification of Recycled Aggregate and Interfacial Zone Microstructure of the Concrete

2010 ◽  
Vol 150-151 ◽  
pp. 313-316 ◽  
Author(s):  
Hong Zhi Cui ◽  
Feng Xing
Keyword(s):  
Surface Modification ◽  
Water Absorption ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hardened Cement ◽  
Interfacial Zone ◽  
Aggregate Concrete ◽  
Optimal Value ◽  
High Concentrations ◽  
Zone Microstructure

Due to most of recycled aggregate (RA) possesses higher water absorption, therefore, the process of mixing recycled aggregate concrete (RAC) is more complex than that of normal aggregate concrete (NAC). In this paper, an organosilicone modifier was used to modify RA to reduce its water absorption. Four mixes of concrete were made up with modified RA at a concentration of 1:1, modified RA at a concentration of 1:2, unmodified RA, and NA, respectively. The water absorption unmodified RA and modified RA was compared, and effect of RA surface modification on the microstructure of the interfacial transition zone (ITZ) between the RA and the hardened cement paste was examined. The investigation results show that a higher concentration of modifier is more effective in reducing the water absorption of RA; and there is an optimal value of modifier concentration, and the use of in high concentrations modifier will adversely affect the integrity of interfacial zone.

scholarly journals Compressive Strength Study on the Freeze-thaw Resistance of Recycled Aggregate Concrete Members

2017 ◽  
Vol 11 (1) ◽  
pp. 270-280 ◽  
Author(s):  
Haicheng Niu ◽  
Yonggui Wang ◽  
Xianggang Zhang ◽  
Xiaojing Yin
Keyword(s):  
Compressive Strength ◽  
Mass Loss ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Replacement Rate ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Surface Scaling

Introduction: Freeze-thaw resistance of recycled aggregate concrete with partial or total replacement of recycled aggregate compared with that of natural aggregate concrete was investigated in this paper. Method: Ninety specimens were fabricated to study the influence of different recycled aggregate replacement ratios on the surface scaling, mass loss, and residual compressive strength after 100 freeze-thaw cycles. Results: The experiment results indicate that the type of recycled aggregate and its replacement ratio have significant effects on the freeze-thaw performance. The cubic compressive strength of recycled aggregate concrete is overall slightly lower than that of normal concrete. After 100 freeze-thaw cycles, the compressive strength decreases and the reduction extent increases with increasing replacement rate of recycled aggregate. The surface scaling of reinforced recycled concrete prisms tends to be more severe with the increase of freeze-thaw cycles. Conclusion: Furthermore, a notable rise in mass loss and the bearing capacity loss is also found as the substitution ratio increases. Under the same replacement rate, recycled fine aggregate causes more negative effects on the freeze-thaw resistance than recycled coarse aggregate.

scholarly journals Los Angeles index and water absorption capacity of crushed aggregates

2020 ◽  
Vol 15 (1) ◽  
pp. 65-78
Author(s):  
Mohammed Abed ◽  
Rita Nemes
Keyword(s):  
Los Angeles ◽  
Water Absorption ◽  
High Performance Concrete ◽  
Absorption Capacity ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Aggregate Concrete ◽  
Crushed Aggregate

Abstract The mechanical and physical properties of the crushed aggregate have been studied. The properties of crushed aggregate, which produced from recycled aggregate concrete is not discussed in the literature yet despite it could be a choice in some circumstances like in case of demolishing the structures that already constructed by recycled aggregate concrete. Twenty-two types of self-compacting high-performance concrete made by coarse natural aggregate and coarse recycle concrete aggregate have been crushed and their properties have been studied. The main findings of the present study that, the Los Angeles index and water absorption of crushed aggregate is affected by the coarse recycled concrete aggregate dosage in its parent concrete, as well as, incorporating cement replacing materials in parent concrete help to enhance the abrasion resistance of crushed aggregate.

Sign in / Sign up

Export Citation Format

Share Document