scholarly journals Spectral and Energy Efficiencies in mmWave Cellular Networks for Optimal Utilization

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Abdulbaset M. Hamed ◽  
Raveendra K. Rao

Millimeter wave (mmWave) spectrum has been proposed for use in commercial cellular networks to relieve the already severely congested microwave spectrum. Thus, the design of an efficient mmWave cellular network has gained considerable importance and has to take into account regulations imposed by government agencies with regard to global warming and sustainable development. In this paper, a dense mmWave hexagonal cellular network with each cell consisting of a number of smaller cells with their own Base Stations (BSs) is presented as a solution to meet the increasing demand for a variety of high data rate services and growing number of users of cellular networks. Since spectrum and power are critical resources in the design of such a network, a framework is presented that addresses efficient utilization of these resources in mmWave cellular networks in the 28 and 73 GHz bands. These bands are already an integral part of well-known standards such as IEEE 802.15.3c, IEEE 802.11ad, and IEEE 802.16.1. In the analysis, a well-known accurate mmWave channel model for Line of Sight (LOS) and Non-Line of Sight (NLOS) links is used. The cellular network is analyzed in terms of spectral efficiency, bit/s, energy efficiency, bit/J, area spectral efficiency, bit/s/m2, area energy efficiency, bit/J/m2, and network latency, s/bit. These efficiency metrics are illustrated, using Monte Carlo simulation, as a function of Signal-to-Noise Ratio (SNR), channel model parameters, user distance from BS, and BS transmission power. The efficiency metrics for optimum deployment of cellular networks in 28 and 73 GHz bands are identified. Results show that 73 GHz band achieves better spectrum efficiency and the 28 GHz band is superior in terms of energy efficiency. It is observed that while the latter band is expedient for indoor networks, the former band is appropriate for outdoor networks.

Author(s):  
Xiuhua Fu ◽  
Tian Ding ◽  
Rongqun Peng ◽  
Cong Liu ◽  
Mohamed Cheriet

AbstractThis paper studies the communication problem between UAVs and cellular base stations in a 5G IoT scenario where multiple UAVs work together. We are dedicated to the uplink channel modeling and the performance analysis of the uplink transmission. In the channel model, we consider the impact of 3D distance and multi-UAVs reflection on wireless signal propagation. The 3D distance is used to calculate the path loss, which can better reflect the actual path loss. The power control factor is used to adjust the UAV's uplink transmit power to compensate for different propagation path losses, so as to achieve precise power control. This paper proposes a binary exponential power control algorithm suitable for 5G networked UAV transmitters and presents the entire power control process including the open-loop phase and the closed-loop phase. The effects of power control factors on coverage probability, spectrum efficiency and energy efficiency under different 3D distances are simulated and analyzed. The results show that the optimal power control factor can be found from the point of view of energy efficiency.


Entropy ◽  
2020 ◽  
Vol 22 (6) ◽  
pp. 668
Author(s):  
Samet Gelincik ◽  
Ghaya Rekaya-Ben Othman

This paper investigates the achievable per-user degrees-of-freedom (DoF) in multi-cloud based sectored hexagonal cellular networks (M-CRAN) at uplink. The network consists of N base stations (BS) and K ≤ N base band unit pools (BBUP), which function as independent cloud centers. The communication between BSs and BBUPs occurs by means of finite-capacity fronthaul links of capacities C F = μ F · 1 2 log ( 1 + P ) with P denoting transmit power. In the system model, BBUPs have limited processing capacity C BBU = μ BBU · 1 2 log ( 1 + P ) . We propose two different achievability schemes based on dividing the network into non-interfering parallelogram and hexagonal clusters, respectively. The minimum number of users in a cluster is determined by the ratio of BBUPs to BSs, r = K / N . Both of the parallelogram and hexagonal schemes are based on practically implementable beamforming and adapt the way of forming clusters to the sectorization of the cells. Proposed coding schemes improve the sum-rate over naive approaches that ignore cell sectorization, both at finite signal-to-noise ratio (SNR) and in the high-SNR limit. We derive a lower bound on per-user DoF which is a function of μ BBU , μ F , and r. We show that cut-set bound are attained for several cases, the achievability gap between lower and cut-set bounds decreases with the inverse of BBUP-BS ratio 1 r for μ F ≤ 2 M irrespective of μ BBU , and that per-user DoF achieved through hexagonal clustering can not exceed the per-user DoF of parallelogram clustering for any value of μ BBU and r as long as μ F ≤ 2 M . Since the achievability gap decreases with inverse of the BBUP-BS ratio for small and moderate fronthaul capacities, the cut-set bound is almost achieved even for small cluster sizes for this range of fronthaul capacities. For higher fronthaul capacities, the achievability gap is not always tight but decreases with processing capacity. However, the cut-set bound, e.g., at 5 M 6 , can be achieved with a moderate clustering size.


2019 ◽  
Vol 12 (1) ◽  
pp. 1
Author(s):  
Jie Yang ◽  
Ziyu Pan ◽  
Lihong Guo

Due to the dense deployment of base stations (BSs) in heterogeneous cellular networks (HCNs), the energy efficiency (EE) of HCN has attracted the attention of academia and industry. Considering its mathematical tractability, the Poisson point process (PPP) has been employed to model HCNs and analyze their performance widely. The PPP falls short in modeling the effect of interference management techniques, which typically introduces some form of spatial mutual exclusion among BSs. In PPP, all the nodes are independent from each other. As such, PPP may not be suitable to model networks with interference management techniques, where there exists repulsion among the nodes. Considering this, we adopt the Matérn hard-core process (MHCP) instead of PPP, in which no two nodes can be closer than a repulsion radius from one another. In this paper, we study the coverage performance and EE of a two-tier HCN modelled by Matérn hard-core process (MHCP); we abbreviate this kind of two-tier HCN as MHCP-MHCP. We first derive the approximate expression of coverage probability of MHCP-MHCP by extending the approximate signal to interference ratio analysis based on the PPP (ASAPPP) method to multi-tier HCN. The concrete SIR gain of the MHCP model relative to the PPP model is derived through simulation and data fitting. On the basis of coverage analysis, we derive and formulate the EE of MHCP-MHCP network. Simulation results verify the correctness of our theoretical analysis and show the performance difference between the MHCP-MHCP and PPP modelled network.


2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Jiequ Ji ◽  
Kun Zhu ◽  
Ran Wang ◽  
Bing Chen ◽  
Chen Dai

Caching popular contents at base stations (BSs) has been regarded as an effective approach to alleviate the backhaul load and to improve the quality of service. To meet the explosive data traffic demand and to save energy consumption, energy efficiency (EE) has become an extremely important performance index for the 5th generation (5G) cellular networks. In general, there are two ways for improving the EE for caching, that is, improving the cache-hit rate and optimizing the cache size. In this work, we investigate the energy efficient caching problem in backhaul-aware cellular networks jointly considering these two approaches. Note that most existing works are based on the assumption that the content catalog and popularity are static. However, in practice, content popularity is dynamic. To timely estimate the dynamic content popularity, we propose a method based on shot noise model (SNM). Then we propose a distributed caching policy to improve the cache-hit rate in such a dynamic environment. Furthermore, we analyze the tradeoff between energy efficiency and cache capacity for which an optimization is formulated. We prove its convexity and derive a closed-form optimal cache capacity for maximizing the EE. Simulation results validate the proposed scheme and show that EE can be improved with appropriate choice of cache capacity.


2020 ◽  
Vol 75 (4) ◽  
pp. 369-382
Author(s):  
Moubachir Madani Fadoul

Abstract The rapid growth of small cells is driving cellular network toward randomness and heterogeneity. The multi-tier heterogeneous network (HetNet) addresses the massive connectivity demands of the emerging cellular networks. Cellular networks are usually modeled by placing each tier (e.g macro, pico and relay nodes) deterministically on a grid which ignores the spatial randomness of the nodes. Several works were idealized for not capturing the interference which is a major performance bottleneck. Overcoming such limitation by realistic models is much appreciated. Multi-tier relay cellular network is studied in this paper, In particular, we consider $${\mathscr {K}}$$ K -tier transmission modeled by factorial moment and stochastic geometry and compare it with a single-tier, traditional grid model and multi-antenna ultra-dense network (UDN) model to obtain tractable rate coverage and coverage probability. The locations of the relays, base stations, and users nodes are modeled as a Poisson Point Process. The results showed that the proposed model outperforms the traditional multi-antenna UDN model and its accuracy is confirmed to be similar to the traditional grid model. The obtained results from the proposed and comparable models demonstrate the effectiveness and analytical tractability to study the HetNet performance.


2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Yue Ma ◽  
Li Zhou ◽  
Zhenghua Gu ◽  
Yang Song ◽  
Bin Wang

With the access of a myriad of smart handheld devices in cellular networks, mobile crowdsourcing becomes increasingly popular, which can leverage omnipresent mobile devices to promote the complicated crowdsourcing tasks. Device-to-device (D2D) communication is highly desired in mobile crowdsourcing when cellular communications are costly. The D2D cellular network is more preferable for mobile crowdsourcing than conventional cellular network. Therefore, this paper addresses the channel access and power control problem in the D2D underlaid cellular networks. We propose a novel semidistributed network-assisted power and a channel access control scheme for D2D user equipment (DUE) pieces. It can control the interference from DUE pieces to the cellular user accurately and has low information feedback overhead. For the proposed scheme, the stochastic geometry tool is employed and analytic expressions are derived for the coverage probabilities of both the cellular link and D2D links. We analyze the impact of key system parameters on the proposed scheme. The Pareto optimal access threshold maximizing the total area spectral efficiency is obtained. Unlike the existing works, the performances of the cellular link and D2D links are both considered. Simulation results show that the proposed method can improve the total area spectral efficiency significantly compared to existing schemes.


Author(s):  
Prapassorn Phaiwitthayaphorn ◽  
Kazuo Mori ◽  
Hideo Kobayashi ◽  
Pisit Boonsrimuang

The mobile traffic continuously grows at a rapid rate driven by the widespread use of wireless devices. Along with that, the demands for higher data rate and better coverage lead to increase in power consumption and operating cost of network infrastructure. The concept of heterogeneous networks (HetNets) has been proposed as a promising approach to provide higher coverage and capacity for cellular networks. HetNet is an advanced network consisting of multiple kinds of base stations, i.e., macro base station (MBS), and small base station (SBS). The overlay of many SBSs into the MBS coverage can provide higher network capacity and better coverage in cellular networks. However, the dense deployment of SBSs would cause an increase in the power consumption, leading to a decrease in the energy efficiency in downlink cellular networks. Another technique to improve energy efficiency while reducing power consumption in the network is to introduce sleep control for SBSs. This paper proposes cell throughput based sleep control which the cell capacity ratio for the SBSs is employed as decision criteria to put the SBSs into a sleep state. The simulation results for downlink communications demonstrate that the proposed scheme improves the energy efficiency, compared with the conventional scheme.


Sign in / Sign up

Export Citation Format

Share Document