scholarly journals Influence of Different Pigmentations and Accelerated Aging on the Hardness and Tear Strength of the A-2186 and MDX4-4210 Silicones

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Estefânia Marrega Malavazi ◽  
Daniela Micheline dos Santos ◽  
Clóvis Lamartine de Moraes Melo Neto ◽  
Fernanda Pereira de Caxias ◽  
Emily Vivianne Freitas da Silva ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Repeated Measures ◽  
Accelerated Aging ◽  
Hardness Test ◽  
Strength Test ◽  
Tear Strength ◽  
Tukey Test ◽  
Repeated Measures Analysis ◽  
Before And After ◽  
Hardness Values

Objective. To evaluate the influence of different pigmentations and accelerated aging on the hardness and tear strength of the A-2186 and MDX4-4210 silicones. Materials and Methods. The samples A-2186 and MDX4-4210 were manufactured without and with pigmentations (black, bronze, and pink). For the Shore A hardness test, 80 samples of each silicone were fabricated, and for the tear strength test, 320 samples of each silicone were fabricated. Eight groups were created for each test (n = 10). These tests were performed before and after 252, 504, and 1008 hours of aging. Three-way repeated-measures analysis of variance and the Tukey test were performed (α = 0.05). Results. The A-2186 silicone showed higher hardness and tear strength when compared with the MDX4-4210 silicone p<0.05, except in the hardness of the A-2186 and MDX4-4210 groups without pigmentation after 1008 hours p>0.05. All hardness values were between 25 and 35 units, regardless of the silicone type, period, and pigmentation (or no pigmentation). In most situations, the hardness of silicones used increased after 252 hours p<0.05. The nonpigmented MDX4-4210 group and all A-2186 groups showed an increase in tear strength after 252 hours p<0.05. For the nonpigmented MDX4-4210 group, from 252 to 1008 hours, there was no change in tear strength p>0.05. All pigmented MDX4-4210 groups showed no change in tear strength from 0 (initial) to 1008 hours of aging p>0.05. In all A-2186 groups, from 252 to 504 hours, there was a reduction in tear strength p<0.05, and from 504 to 1008 hours, there was an increase in tear strength p<0.05, except in the bronze A-2186 group p>0.05. Conclusion. In most situations, the A-2186 silicone showed significantly higher values of hardness and tear strength than the MDX4-4210 silicone. All hardness values were considered clinically acceptable. Accelerated aging could increase, decrease, or not significantly change the hardness and tear strength of the silicones used. The results of hardness and tear strength suggest that MDX4-4210 was more influenced by the presence of pigmentation after aging.

Effect of Caries Infiltration Technique and Fluoride Therapy on Microhardness of Enamel Carious Lesions

2012 ◽  
Vol 37 (4) ◽  
pp. 363-369 ◽  
Author(s):  
CRG Torres ◽  
PCF Rosa ◽  
NS Ferreira ◽  
A B Borges
Keyword(s):  
Analysis Of Variance ◽  
Repeated Measures ◽  
Artificial Saliva ◽  
Fluoride Solution ◽  
Resin Infiltration ◽  
Tukey Test ◽  
Carious Lesions ◽  
Repeated Measures Analysis ◽  
Infiltration Technique ◽  
Acid Challenge

SUMMARY Enamel white spot subsurface lesions compromise esthetics and precede cavitation; therefore, they must be halted. The aim of this study was to evaluate the effect of a caries infiltration technique and fluoride therapy on the microhardness of enamel carious lesions. Subsurface carious lesions were produced in 60 bovine specimens with polished enamel surfaces. The specimens were divided into four groups (n=15), according to the treatment used: CON, control—immersion in artificial saliva; DF, daily 0.05% fluoride solution; WF, weekly 2% fluoride gel; and IC, resin infiltration (Icon). The specimens were kept in artificial saliva and evaluated for microhardness at five points: baseline, after caries production, after four and eight weeks of treatment, and a final evaluation after being submitted to a new acid challenge. The repeated-measures analysis of variance showed significant differences according to the type of treatment (TREAT; p=0.001) and time of evaluation (EV; p=0.001). The results of the Tukey test were TREAT: CON = 45.18 (±29.17)a, DF = 107.75 (±67.38)b, WF = 83.25 (±51.17)c, and IC = 160.83 (±91.11)d. Analysis of correlation between the TREAT and EV factors showed no significant differences for DF (138.63 ± 38.94) and IC (160.99 ± 46.13) after the new acid challenge. The microhardness results in decreasing order after eight weeks were IC &gt; DF &gt; WF &gt; CON. It was concluded that the microhardness of carious lesions increased with the infiltration of resin, while the final microhardness after a new acid challenge was similar for DF and IC.

The Home Advantage: Performance Effects in Female Collegiate Division I Gymnastics

2008 ◽  
Vol 1 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Timothy Baghurst ◽  
Inza Fort ◽  
René Cook
Keyword(s):  
Analysis Of Variance ◽  
Repeated Measures ◽  
Division I ◽  
Repeated Measures Analysis ◽  
Home Advantage ◽  
Performance Effects ◽  
Before And After ◽  
At Home

The current study investigated the performance effects of competing at home or away venues in female collegiate Division I gymnastics. Teams (N = 15) selected for analyses were ranked in the top 25 nationally at the end of each regular season during the period of 2003 to 2007 with the exclusion of 2005. Each team’s total scores at all regular season home meets over the four years were compiled and compared to their respective away meet total scores. A repeated measures analysis of variance revealed home scores to be significantly higher than away scores. Additionally, with the introduction of the Judges’ Assignor System (JAS) in 2005, team scores at home and away were compared before and after its introduction. Team scores were significantly higher at home prior to and following the introduction of JAS. However, performance scores were found to be significantly reduced at both home and away with JAS. The results of this study suggest that teams perform significantly better at home than away. In addition, the findings suggest that JAS has significantly reduced gymnastics scores, yet has not significantly altered the effects of competing away from home. Findings are discussed in light of current research and application for coaches and officials is provided.

Color Stability of Resin Cements Exposed to Aging

2019 ◽  
Vol 44 (6) ◽  
pp. 609-614 ◽  
Author(s):  
NC Ramos ◽  
JN Luz ◽  
MC Valera ◽  
RM Melo ◽  
GSFA Saavedra ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Artificial Aging ◽  
Resin Composite ◽  
Accelerated Aging ◽  
Color Stability ◽  
Distilled Water ◽  
Base Catalyst ◽  
Resin Cements ◽  
Tukey Test ◽  
Before And After

SUMMARY The aim of this study was to evaluate the color stability of light-cured and dual-cured resin cements after artificial accelerated aging. Ten specimens (6-mm diameter and 2-mm thickness) for each of five resin cements were prepared: GC (dual-cured cement, GCem), Vb (light-cured cement, Variolink II only the base), Vbc (dual-cured cement, Variolink II base with catalyst), VV (light-cured cement, Variolink Veneer), and FR (flowable resin composite, light cured). The samples were polished and stored in an accelerated artificial aging machine for 308 hours (160 klx), with cycles of 120 minutes under light and 60 minutes in the dark. All aging was carried out in distilled water at 37°C and light irradiation at 765 W/m2. The samples were evaluated in a spectrophotometer before and after aging, and results were calculated according to CIEDE2000. The data were statistically analyzed (one-way analysis of variance and Tukey test, 95% confidence). The results of ΔE00 were statistically significant for the type of cement (p&lt;0.001), with differences among tested groups. Variolink II (base only and base + catalyst) and the flowable resin were the cements with the lowest color variations after the artificial accelerated aging. Considering the values ΔE00 of acceptability and perceptibility, none of the tested cements showed acceptable values.

Effects of a Combination of Stances and Points of Aim on Putting Accuracy

1988 ◽  
Vol 66 (1) ◽  
pp. 139-143 ◽  
Author(s):  
Erich Gott ◽  
Carl Mc Gown
Keyword(s):  
Analysis Of Variance ◽  
Repeated Measures ◽  
Traditional Method ◽  
Constant Error ◽  
Popular Opinion ◽  
Variable Error ◽  
Repeated Measures Analysis ◽  
Better Than

The purpose of this study was to determine the effects of two putting stances (conventional versus side-saddle) and two points of aim (ball versus hole) on putting accuracy. Subjects (12 men, 4 women) were taught to putt using four methods: (a) conventional stance, eyes on the ball; (b) conventional stance, eyes on the hole; (c) side-saddle stance, eyes on the ball; and (d) side-saddle stance, eyes on the hole. Each subject practiced each method for 2 wk., after which they were tested for purring accuracy by counting putts made, determining constant error, and by calculating variable error. Accuracy was assessed at 5 and 15 ft. A 2 by 2 repeated-measures analysis of variance showed that there was no single combination of stance and point of aim that was significantly better than another at either distance. This suggests that, contrary to popular opinion, the traditional method of putting is not the best method for putting; other methods are equally as good and could be used if individually desired.

scholarly journals Utility of acute phase proteins as biomarkers of transport stress in ewes and beef cattle

2015 ◽  
Vol 4 (2) ◽  
Author(s):  
Francesco Fazio ◽  
Vincenzo Ferrantelli ◽  
Antonello Cicero ◽  
Stefania Casella ◽  
Giuseppe Piccione
Keyword(s):  
Beef Cattle ◽  
Repeated Measures ◽  
Acute Phase Proteins ◽  
Animal Health ◽  
White Blood Cells ◽  
Amyloid A ◽  
Repeated Measures Analysis ◽  
Before And After ◽  
Rest Time ◽  
Transport Stress

The effect of transport on serum amyloid A (SAA), haptoglobin (Hp), Fibrinogen and white blood cells (WBC) was evaluated in 10 ewes and 10 beef cattle. All animals were transported by road for 6 h over a distance of about 490 km with an average speed of 80 km/h. Blood samples, collected via jugular venepuncture, were obtained before and after transport as well as after 12, 24 and 48 h rest time. One-way repeated measures analysis of variance showed a statistically significant effect of sampling time on SAA, Hp, and WBC in ewes and beef cattle. Based on these results, Hp and SAA levels, together with WBC, may be useful indicators of animal health and welfare and in predicting the risk assessment in meat inspection.

scholarly journals Estimating Bayes factors from minimal summary statistics in repeated measures analysis of variance designs

2020 ◽  
Vol 17 (1) ◽  
Author(s):  
Thomas Faulkenberry
Keyword(s):  
Analysis Of Variance ◽  
Repeated Measures ◽  
Bayes Factor ◽  
Linear Models ◽  
Repeated Measurements ◽  
Bayes Factors ◽  
Complex Method ◽  
Summary Statistics ◽  
Minimal Set ◽  
Repeated Measures Analysis

In this paper, I develop a formula for estimating Bayes factors directly from minimal summary statistics produced in repeated measures analysis of variance designs. The formula, which requires knowing only the F-statistic, the number of subjects, and the number of repeated measurements per subject, is based on the BIC approximation of the Bayes factor, a common default method for Bayesian computation with linear models. In addition to providing computational examples, I report a simulation study in which I demonstrate that the formula compares favorably to a recently developed, more complex method that accounts for correlation between repeated measurements. The minimal BIC method provides a simple way for researchers to estimate Bayes factors from a minimal set of summary statistics, giving users a powerful index for estimating the evidential value of not only their own data, but also the data reported in published studies.

scholarly journals Microhardness evaluation of root dentin after using resin sealer solvents

2021 ◽  
Vol 15 (4) ◽  
pp. 256-261
Author(s):  
Gamze Nalci ◽  
Tayfun Alaçam ◽  
Bülent Altukaynak
Keyword(s):  
Repeated Measures ◽  
Saline Solution ◽  
Prolonged Exposure ◽  
Repeated Measures Anova ◽  
Ultrasonic Agitation ◽  
Gutta Percha ◽  
Before And After ◽  
Root Dentin ◽  
Substantial Decline ◽  
Hardness Values

Background. This study aimed to assess the effects of methyl ethyl ketone (MEK) and ethyl acetate (EA) on dentin microhardness, used as resin sealer solvents. Methods. Eighty halves of single-rooted teeth were randomly divided into four groups to apply MEK, EA, chloroform, or saline solution. Vickers hardness values were measured for three root levels before and after the direct application of solvents for 5 and 15 minutes or a 1-minute application with ultrasonic agitation. The results were analyzed using repeated-measures ANOVA, and adjustments were made for comparisons with Bonferroni tests. Results. The dentin microhardness decreased in all the solvent groups (P<0.05). The changes in microhardness increased with prolonged exposure times, except for the saline solution group. Chloroform exhibited the most significant decrease in value. Furthermore, ultrasonic agitation elicited a more substantial decline in values. Conclusion. MEK and EA might be preferred over chloroform as a solvent for resin sealers because they offer an attenuated decrease in dentin microhardness and do not have gutta-percha-dissolving properties.

scholarly journals Effects of Intermittent and Continuous Static Stretching on Range of Motion and Musculotendinous Viscoelastic Properties Based on a Duration-Matched Protocol

2021 ◽  
Vol 18 (20) ◽  
pp. 10632
Author(s):  
Kensuke Oba ◽  
Mina Samukawa ◽  
Yosuke Abe ◽  
Yukino Suzuki ◽  
Miho Komatsuzaki ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Range Of Motion ◽  
Repeated Measures ◽  
Plantar Flexors ◽  
Constant Torque ◽  
Resistive Torque ◽  
Repeated Measures Analysis ◽  
Before And After ◽  
Musculotendinous Stiffness ◽  
Torque Angle

The different effects of intermittent and continuous stretching on the mechanical properties of the musculotendinous complex have been unclear. This study aimed to compare the effects of intermittent and continuous stretching for the same duration on the range of motion (ROM), passive resistive torque (PRT), and musculotendinous stiffness (MTS) of ankle plantar flexors. Eighteen healthy young men participated in the study. Intermittent (four sets × 30 s) and continuous stretching (one set × 120 s) were performed in random orders on two separate days. Both stretching protocols were conducted using a dynamometer with a constant torque applied. ROM and PRT were determined using a dynamometer, and MTS was calculated using the torque–angle relationship measured before and after stretching. Two-way repeated measures analysis of variance was performed for all parameters. Both intermittent and continuous stretching significantly increased ROM and decreased PRT and MTS (p < 0.05). Intermittent stretching led to greater changes in ROM and PRT than continuous stretching. However, the reduction in MTS did not differ between the two conditions. These results suggest that intermittent stretching is more effective in increasing ROM and changing the mechanical properties of the musculotendinous complex.

Immediate changes in chest mobility and trunk muscle activity during pelvic tilt following different trunk muscle exercises

2021 ◽  
pp. 1-10
Author(s):  
Kazuma Uebayashi ◽  
Yu Okubo ◽  
Takuya Nishikawa ◽  
Taro Morikami ◽  
Jindo Hatanaka
Keyword(s):  
Muscle Activity ◽  
Repeated Measures ◽  
Trunk Muscle ◽  
Trunk Muscles ◽  
Abdominal Muscles ◽  
Kinematic Data ◽  
Repeated Measures Analysis ◽  
Before And After ◽  
Posterior Tilt ◽  
Increased Activity

BACKGROUND: Given the characteristics of the superficial trunk muscles that cross the chest and pelvis, their excessive contraction might limit chest mobility. OBJECTIVE: To examine the immediate effects of two types of trunk muscle exercises on chest mobility and trunk muscle activities. METHODS: Fourteen healthy men (age: 21.1 ± 1.0 years, height: 172.7 ± 5.6 cm, weight: 61.0 ± 7.1 kg, body mass index: 20.4 ± 1.7 kg/m2; mean ± SD) randomly performed trunk side flexion and draw-in exercises using a cross-over design. The chest kinematic data and trunk muscle activities were measured before and after each intervention during the following tasks: maximum inspiration/expiration and maximum pelvic anterior/posterior tilt while standing. Two-way repeated measures analysis of variance was used for statistical analysis (P< 0.05). RESULTS: After the side flexion, upper and lower chest mobility significantly decreased, and superficial trunk muscle activity significantly increased during the maximum pelvic anterior tilt (P< 0.05). Additionally, after the draw-in, upper chest mobility significantly increased during the maximum pelvic anterior tilt (P< 0.05). CONCLUSIONS: Increased activity of the superficial abdominal muscles might limit chest mobility during maximum pelvic anterior tilt. Conversely, the facilitation of deep trunk muscles might increase upper chest mobility during the maximum pelvic anterior tilt.

Sign in / Sign up

Export Citation Format

Share Document