scholarly journals T-S Fuzzy System Controller for Stabilizing the Double Inverted Pendulum

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Boutaina Elkinany ◽  
Mohammed Alfidi ◽  
Redouane Chaibi ◽  
Zakaria Chalh

This article provides a representation of the double inverted pendulum system that is shaped and regulated in response to torque application at the top rather than the bottom of the pendulum, given that most researchers have controlled the double inverted pendulum based on the lower part or the base. To achieve this objective, we designed a dynamic Lagrangian conceptualization of the double inverted pendulum and a state feedback representation based on the simple convex polytypic transformation. Finally, we used the fuzzy state feedback approach to linearize the mathematical nonlinear model and to develop a fuzzy controller H ∞ , given its great ability to simplify nonlinear systems in order to reduce the error rate and to increase precision. In our virtual conceptualization of the inverted pendulum, we used MATLAB software to simulate the movement of the system before applying a command on the upper part of the system to check its stability. Concerning the nonlinearities of the system, we have found a state feedback fuzzy control approach. Overall, the simulation results have shown that the fuzzy state feedback model is very efficient and flexible as it can be modified in different positions.

Author(s):  
Mohammed A. A. Al-Mekhlafi ◽  
Herman Wahid ◽  
Azian Abd Aziz

The inverted pendulum is an under-actuated and nonlinear system, which is also unstable. It is a single-input double-output system, where only one output is directly actuated. This paper investigates a single intelligent control system using an adaptive neuro-fuzzy inference system (ANFIS) to stabilize the inverted pendulum system while tracking the desired position. The non-linear inverted pendulum system was modelled and built using MATLAB Simulink. An adaptive neuro-fuzzy logic controller was implemented and its performance was compared with a Sugeno-fuzzy inference system in both simulation and real experiment. The ANFIS controller could reach its desired new destination in 1.5 s and could stabilize the entire system in 2.2 s in the simulation, while in the experiment it took 1.7 s to reach stability. Results from the simulation and experiment showed that ANFIS had better performance compared to the Sugeno-fuzzy controller as it provided faster and smoother response and much less steady-state error.


2021 ◽  
pp. 107754632110429
Author(s):  
Pouriya Pourgholam ◽  
Hamid Moeenfard

Accurate modeling and efficient control of inverted pendulums have always been a challenge for researchers. So, the current research aims to achieve the following objectives: (I) proposing a comprehensive dynamic model for the inverted pendulums which accounts for the flexibility of the pendulum bar and (II) suggesting an appropriate supervisory fuzzy-pole placement control strategy for stabilizing the pendulum system. Using a Lagrangian formulation, the equations of motion are derived and linearized. Then, a state feedback controller with a reduced-order observer is designed to stabilize the system. Closed-loop simulations reveal that at least six modes shall be considered in the dynamic equations. To improve the quality of the transient response, a novel fuzzy system is developed for real-time assignment of the controller poles. Simulation results demonstrate that the control quality is significantly improved by adding a supervisory fuzzy system to the control loop. The developed approach for dynamic modeling of the system, and the idea of multi-level fuzzy-pole placement control architecture developed in this paper, may be successfully applied to improve the response specifications in other dynamic systems.


2014 ◽  
Vol 71 (1) ◽  
Author(s):  
Hazem I. Ali

In this paper the design of robust stabilizing state feedback controller for inverted pendulum system is presented. The Ant Colony Optimization (ACO) method is used to tune the state feedback gains subject to different proposed cost functions comprise of H-infinity constraints and time domain specifications. The steady state and dynamic characteristics of the proposed controller are investigated by simulations and experiments. The results show the effectiveness of the proposed controller which offers a satisfactory robustness and a desirable time response specifications. Finally, the robustness of the controller is tested in the presence of system uncertainties and disturbance.


Author(s):  
Tuna Balkan ◽  
Mehmet Emin Ari

Abstract An inverted pendulum system has been designed and constructed as a physical model of inherently unstable mechanical systems. The vertical upright position of a pendulum is controlled by changing the horizontal position of a cart to which the pendulum is hinged. The stability of the system has been investigated when a fuzzy controller is used to produce the control signal, while making a single measurement. It has been shown that by using simple fuzzy rules to allow real time computation with a single angular position measurement, the system can not be made absolutely stable. However, the stability and performance of the system have been considerably improved by shrinking the membership functions of angular position, computed angular velocity and control signal when inverted pendulum is very close to the vertical upright position.


2013 ◽  
Vol 675 ◽  
pp. 31-34
Author(s):  
Hong Xing Li ◽  
Yong Xin Zhang

Inverted pendulum system is a non-linear,natural instability and uncertain system. As a controlled objects of control system in mechanical industry, it can be analysis and verification by different control theory and methods. The paper analysis the non-linear inverted pendulum system, then deduces sufficiency conditions of the existence of controller with state feedback. It utilizes standard digital software to get the answer. The feasibility and robustness is demonstrated by numerical examples.


Sign in / Sign up

Export Citation Format

Share Document