scholarly journals Optimal Fitting Method of Nonlinear Simultaneous Equations Considering Structural Tensor Image Modeling

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Shiping Zhu

For the purpose of resolving the phenomenon of network congestion in the process of many-to-one communication in multimedia networks at present, the optimal fitting method of nonlinear simultaneous equations (OFMNSEs) is applied to the multimedia transmission congestion control system in this paper. The rate control and resource scheduling are effectively combined, and a clustering network structure is used to activate the congestion control method in turn based on the cluster header and intracluster-related indexes. Finally, it can be known through the analysis of the simulation results that the OFMNSE algorithm put forward in this paper can improve the congestion issue of the multimedia network transmission process and reduce the packet loss rate of data during the transmission effectively under the condition of different relative cache sizes compared with the conventional algorithm.

2019 ◽  
Vol 14 ◽  
Author(s):  
Tayyab Khan ◽  
Karan Singh ◽  
Kamlesh C. Purohit

Background: With the growing popularity of various group communication applications such as file transfer, multimedia events, distance learning, email distribution, multiparty video conferencing and teleconferencing, multicasting seems to be a useful tool for efficient multipoint data distribution. An efficient communication technique depends on the various parameters like processing speed, buffer storage, and amount of data flow between the nodes. If data exceeds beyond the capacity of a link or node, then it introduces congestion in the network. A series of multicast congestion control algorithms have been developed, but due to the heterogeneous network environment, these approaches do not respond nor reduce congestion quickly whenever network behavior changes. Objective: Multicasting is a robust and efficient one-to-many (1: M) group transmission (communication) technique to reduced communication cost, bandwidth consumption, processing time and delays with similar reliability (dependability) as of regular unicast. This patent presents a novel and comprehensive congestion control method known as integrated multicast congestion control approach (ICMA) to reduce packet loss. Methods: The proposed mechanism is based on leave-join and flow control mechanism along with proportional integrated and derivate (PID) controller to reduce packet loss, depending on the congestion status. In the proposed approach, Proportional integrated and derivate controller computes expected incoming rate at each router and feedback this rate to upstream routers of the multicast network to stabilize their local buffer occupancy. Results: Simulation results on NS-2 exhibit the immense performance of the proposed approach in terms of delay, throughput, bandwidth utilization, and packet loss than other existing methods. Conclusion: The proposed congestion control scheme provides better bandwidth utilization and throughput than other existing approaches. Moreover, we have discussed existing congestion control schemes with their research gaps. In the future, we are planning to explore the fairness and quality of service issue in multicast communication.


1979 ◽  
Vol 16 (5) ◽  
pp. 779-789 ◽  
Author(s):  
Sandro Incerti ◽  
Valerio Parisi ◽  
Francesco Zirilli

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Xinhao Yang ◽  
Ze Li

The congestion controller based on the multiple model adaptive control is designed for the network congestion in TCP/AQM network. As the conventional congestion control is sensitive to the variable network condition, the adaptive control method is adopted in our congestion control. The multiple model adaptive control is introduced in this paper based on the weight calculation instead of the parameter estimation in past adaptive control. The model set is composed by the dynamic model based on the fluid flow. And three “local” congestion controllers are nonlinear output feedback controller based on variable RTT, H2output feedback controller, and proportional-integral controller, respectively. Ns-2 simulation results in section 4 indicate that the proposed algorithm restrains the congestion in variable network condition and maintains a high throughput together with a low packet drop ratio.


Trees ◽  
2017 ◽  
Vol 31 (6) ◽  
pp. 1959-1971 ◽  
Author(s):  
Liyong Fu ◽  
Wei Xiang ◽  
Guangxing Wang ◽  
Kaijie Hao ◽  
Shouzheng Tang

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 20628-20645 ◽  
Author(s):  
Mohammad Hossein Homaei ◽  
Faezeh Soleimani ◽  
Shahaboddin Shamshirband ◽  
Amir Mosavi ◽  
Narjes Nabipour ◽  
...  

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2915 ◽  
Author(s):  
Sang Min Park ◽  
Eunsu Jang ◽  
Dongmyoung Joo ◽  
Byoung Kuk Lee

Typical domestic induction cooktops can only heat ferromagnetic pots/vessels. However, to increase the availability and marketability of induction heating (IH) cooktop products, heating techniques for all types of metallic pots (i.e., created from metals such as aluminum, copper, and stainless steel) are required. To satisfy the requirements of induction cooktops, this paper proposes the design of an all-metal domestic IH system that can heat any type of metallic pot while considering the temperature variation of the working-coil. A control algorithm using a power curve-fitting method (CFM) is presented to quickly respond to load parameter variations in the IH. In addition, the CFM control algorithm is established to compensate for the power reference value by reflecting the increase in the working-coil temperature during the heating of the non-ferromagnetic pot. To evaluate the performance of the proposed system, the control algorithm strategy and experimental results based on a 3.2 kW all-metal IH cooktop are presented.


Sign in / Sign up

Export Citation Format

Share Document