Bio-priming of Aceh local chili seeds in the effort to increase production and begomo virus resistance

The purpose of this study was to determine whether P60 could induce resistance in local Aceh chili varieties to begomovirus and compared with national varieties. This research was conducted at the Experimental Farm, Genetics and Plant Breeding Laboratory, Faculty of Agriculture, Syiah Kuala University, Banda Aceh, from March to July 2021. This study used a factorial randomized block design. The tested factors consisted of two factors. The first factor is bio priming. The second factor consists of four local Aceh chili varieties, namely: V1 = Odeng, V2 = Lanyoe, V3 = Super Lamando and V4 = LamandoLapaben and one national variety, namely V5 = Baja F1 as a comparison variety. The results showed that the best local Aceh variety was LamandoLapaben for the variables of resistance response, incubation period, disease intensity, disease incidence, stem diameter, and crown width. The best local variety Aceh Lanyoe on plant height and dichotomous height parameters. Giving P60 can reduce the percentage of disease incidence by 52.00% and slow down the process of emergence of disease symptoms (incubation period) 27.11 DAP. The best combination treatment was the LamandoLapaben variety, which was 1.41 milligram Units-1 (Umg)-1.

Effects of Gender and Age in Mandibular Leeway Space for Taiwanese Children

Purpose: Leeway space is clinically crucial in pediatric dentistry because it is utilized to resolve tooth crowding and allow the first molars to drift mesially to establish a Class I molar relationship in the later stages of mixed dentition. This study investigated leeway space in the mixed dentition of Taiwanese children of different sexes and ages. Materials and Methods: The digital panoramic dental films of 182 lower arches of 119 boys and 63 girls aged 5–10 years were analyzed in this retrospective study. The mesiodistal crown widths of the primary canines and first and second molars and the permanent canines and first and second premolars were measured using medical imaging software. Differences in leeway space were statistically analyzed. Results: The average leeway space was 1.29 ± 1.48 mm on each side of the lower arch. The leeway space of children aged 5–6 years was significantly greater than that of children aged 7–8 years. No gender difference in crown width was discovered, except with regard to the primary first molar. Although no gender difference in leeway space was observed, permanent teeth affected leeway space more for girls than for boys. Conclusion: In Taiwanese children, although leeway space does not differ by sex, age affects leeway space. However, permanent tooth size has an influence on the leeway space of girls.

The initial growth of tacca (Tacca leontopetaloides) as food crops in the agroforestry pattern with malapari

Indonesia has many types of carbohydrate sources. Tacca (Tacca leontopetaloides) has potential as a source of the functional food industry, especially maltotriose and maltotetraose production. Tacca grows well in an open or a shaded area on sandy soil-mineral, soil pH is slightly alkaline, with very low to low Cation Exchange Capacity. Malapari (Pongamia pinnata) is a biofuel-producing plant with a natural distribution on coastal land. Planting combination between malapari as an energy-producing plant and tacca as a food source has never existed. So, it needs to be incentives in developing agroforestry that can provide intermediate results for farmers. The requirement of good quality tacca seedlings is a crucial factor in supporting food security. This study aimed to determine the effect of the types of tacca seeds used on the initial growth of tacca. The study used a randomized complete block design consisting of 3 (three) treatments: a) large tubers, b) small tubers, and c) the origin of seeds. The results showed that plants from large tubers produced the highest number of shoots, height, and diameter (5.83; 27.77 cm and 0.43 cm). Five years old malapari reaches a diameter of 6.95 cm, a height of 3.89 m, and a crown width of 2.43 m.

Tree Recognition on the Plantation Using UAV Images with Ultrahigh Spatial Resolution in a Complex Environment

The survival rate of seedlings is a decisive factor of afforestation assessment. Generally, ground checking is more accurate than any other methods. However, the survival rate of seedlings can be higher in the growing season, and this can be estimated in a larger area at a relatively lower cost by extracting the tree crown from the unmanned aerial vehicle (UAV) images, which provides an opportunity for monitoring afforestation in an extensive area. At present, studies on extracting individual tree crowns under the complex ground vegetation conditions are limited. Based on the afforestation images obtained by airborne consumer-grade cameras in central China, this study proposes a method of extracting and fusing multiple radii morphological features to obtain the potential crown. A random forest (RF) was used to identify the regions extracted from the images, and then the recognized crown regions were fused selectively according to the distance. A low-cost individual crown recognition framework was constructed for rapid checking of planted trees. The method was tested in two afforestation areas of 5950 m2 and 5840 m2, with a population of 2418 trees (Koelreuteria) in total. Due to the complex terrain of the sample plot, high weed coverage, the crown width of trees, and spacing of saplings vary greatly, which increases both the difficulty and complexity of crown extraction. Nevertheless, recall and F-score of the proposed method reached 93.29%, 91.22%, and 92.24% precisions, respectively, and 2212 trees were correctly recognized and located. The results show that the proposed method is robust to the change of brightness and to splitting up of a multi-directional tree crown, and is an automatic solution for afforestation verification.

Grading Method of Potted Anthurium Based on RGB-D Features

A grading method of potted Anthurium based on machine vision is proposed. A detection system is designed to acquire color images and depth images of potted Anthurium, and the three-dimensional point-cloud image is reconstructed after registration. According to the testing requirements of potted Anthurium, the minimum enclosing rectangle method is used to measure the width of crowns and spathes. The bubble sequencing method is used to measure the plant height, and the clustering segmentation method is used to calculate the number of spathes. Online automatic grading software for potted Anthurium is developed. Compared with manual measurement, the average measurement accuracies of machine vision for crown width, plant height, spathe width, and spathe number are 98.4%, 98.4%, 98.8%, and 86.7%, respectively. The accuracy rate of grading is 85.86%, which can meet the requirements of automatic grading of potted Anthurium.

Allometry and Post-Drought Growth Resilience of Pedunculate Oak (Quercus robur L.) Varieties

This paper presents an analysis of the radial growth, tree dimensions, and allometry of three phenological pedunculate oak (Quercus robur L.; QURO) varieties (early (E-QURO), typical (T-QURO), and late (L-QURO)), from a common garden experiment. We focused on the resistance and resilience of each variety to drought events, which occurred in 2012 and 2017, as well as their recovery potential during juvenile and mature growth phases, with the goal of clarifying how QURO drought sensitivity is influenced by tree phenology and growth stage. Our results indicate that E-QURO is more drought resistant, while T-QURO and L-QURO exhibit greater recovery potential after a drought event. Hence, typical and late QURO varieties are better prepared to withstand climate change. We also noted differences in the physical dimensions and the allometry of the studied QURO varieties. On average, 21-year-old QURO specimens from the analyzed stand are 9.35 m tall, have a crown width (CW) of 8.05 m, and a diameter at breast height (DBH) of 23.71 cm. Although T-QURO varieties had the greatest DBH and CW, they were shorter than E- and L-QURO, which are similar in height. T-QURO is also shorter relative to DBH, while L-QURO has a wider crown relative to tree height (TH). Intra-variety variations are higher than variations among half-sib (open-pollinated) families of each variety. Moreover, the adopted regression model provided a better fit to the CW/DBH ratio than to TH/DBH and CW/TH.

Generic Additive Allometric Models and Biomass Allocation for Two Natural Oak Species in Northeastern China

Current models for oak species could not accurately estimate biomass in northeastern China, since they are usually restricted to Mongolian oak (Quercus mongolica Fisch. ex Ledeb.) on local sites, and specifically, no biomass models are available for Liaodong oak (Quercuswutaishanica Mayr). The goal of this study was, therefore, to develop generic biomass models for both oak species on a large scale and evaluate the biomass allocation patterns within tree components. A total of 159 sample trees consisting of 120 Mongolian oak and 39 Liaodong oak were harvested and measured for wood (inside bark), bark, branch and foliage biomass. To account for the belowground biomass, 53 root systems were excavated following the aboveground harvest. The share of biomass allocated to different components was assessed by calculating the ratios. An aboveground additive system of biomass models and belowground equations were fitted based on predictors considering diameter (D), tree height (H), crown width (CW) and crown length (CL). Model parameters were estimated by jointly fitting the total and the components’ equations using the weighted nonlinear seemingly unrelated regression method. A leave-one-out cross-validation procedure was used to evaluate the predictive ability. The results revealed that stem biomass accounts for about two-thirds of the aboveground biomass. The ratio of wood biomass holds constant and that of branches increases with increasing D, H, CW and CL, while a reverse trend was found for bark and foliage. The root-to-shoot ratio nonlinearly decreased with D, ranging from 1.06 to 0.11. Tree diameter proved to be a good predictor, especially for root biomass. Tree height is more prominent than crown size for improving stem biomass models, yet it puts negative effects on crown biomass models with non-significant coefficients. Crown width could help improve the fitting results of the branch and foliage biomass models. We conclude that the selected generic biomass models for Mongolian oak and Liaodong oak will vigorously promote the accuracy of biomass estimation.

Allocation of Wood Density in European Oak (Quercus robur L.) Trees Grown under a Canopy of Scots Pine

The allocation of wood density in trees depends on many factors, but mainly on the tree species. A great number of studies have analysed wood density in dominant or codominant trees, but only a few have focused on trees grown under canopy. We examined the basic wood density and fresh wood density of natural origin oaks growing under canopy of artificially planted Scots pine. The major purpose of the work was to study the wood density allocation in different parts of the trees such as the trunk and branches. From a total of 80 oaks we selected eight model trees and measured biometric features of their trunks and crowns. Wood samples from different parts of the trunk and crown were collected after the trees were felled. We observed significant differences between the average basic wood density (595 kg·m−3) and the average fresh wood density (1031 kg·m−3). The central part of the trunk and heartwood shows much higher density than the outer part of the trunk and sapwood, which corresponds to the model of ring-porous trees. Both types of wood density (basic and fresh) were also higher in the trunk than in the branches. The wood density of the branches differed between two zones: A1, which was closer to the trunk and had higher density; and A2, which was farther away from the trunk with lower density. Wood density shows positive correlation with crown length but not with crown width, which was more connected with diameter at breast height. We found lower value of slenderness than the value reported by other authors in oaks planted without canopy. The allocation of wood density in trees is associated with the potential mechanical load.