scholarly journals Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
S. Dinesh Kumar ◽  
L. Ponraj Sankar ◽  
T. Sathish ◽  
V. Vijayan ◽  
A. Parthiban ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Chemical Compositions ◽  
Ramie Fiber ◽  
Hemp Fiber ◽  
Banana Fiber ◽  
Fiber Concentration ◽  
Volume Percentage

Natural fiber composite is the most preferable research area in the modern situation due to its availability, applications, and ecofriendly quality. This paper deals with the influence of hemp fiber with the various compositions of the ramie fiber and some basic mechanical properties of banana fiber composites. The hemp fiber is maintained as 20 percentage of total volume. Then, the remaining volume percentage is shared with the ramie fiber and banana fiber with various combinations. Eleven specimens were prepared to identify the some basic mechanical properties. The chemical compositions were mentioned as a pie chart, and then experimental results were plotted as graphical representations like line diagram and radar diagram for clear identification that the composite with higher ramie fiber concentration provided the greater results in the mechanical behaviors. The suitable composite combinations were recommended based on their superior properties as conclusions.

A Study of the Effects of Ingredients to the Mechanical Properties of Natural Fiber Composites (NFC)

2013 ◽  
Vol 689 ◽  
pp. 382-388
Author(s):  
Ju Seok Oh ◽  
Song Woo Nam ◽  
Sun Woong Choi
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Wood Flour ◽  
Fiber Composite ◽  
Flexural Modulus ◽  
Construction Materials ◽  
Fiber Composites ◽  
Polymer Processing ◽  
Base Resin ◽  
Natural Fiber Composite

The importance of NFC (Natural Fiber Composite) as construction materials is widely accepted all over the world. But it seems that NFC manufacturers have complicated information about the effect of ingredients to their products. Hence systematic study for optimum composition of NFC is needed. This study is aimed to elucidate the effect of ingredients to the mechanical properties of NFC. We devised design of experiments to draw a firm conclusion. The experiments were conducted with polymer processing machines which are widely accepted in polymer processing industries. The result of ANOVA analysis showed that the most important ingredient of NFC is wood flour. And as the length of wood flour increases, the mechanical properties are enhanced. Contrary to wood flour, base resin has little effect to the mechanical properties of NFC. The effect of coupling agent to flexural modulus is not ignorable, but the effect to flexural strength is different from that of flexural modulus.

scholarly journals An Unconventional Approach for Analyzing the Mechanical Properties of Natural Fiber Composite Using Convolutional Neural Network

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Govindaraj Ramkumar ◽  
Satyajeet Sahoo ◽  
G. Anitha ◽  
S. Ramesh ◽  
P. Nirmala ◽  
...  
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Convolutional Neural Network ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Ground Truth ◽  
Fiber Composites ◽  
Natural Fiber Composites ◽  
Training Process ◽  
Natural Fiber Composite

Over the past few years, natural fiber composites have been a strategy of rapid growth. The computational methods have become a significant tool for many researchers to design and analyze the mechanical properties of these composites. The mechanical properties such as rigidity, effects, bending, and tensile testing are carried out on natural fiber composites. The natural fiber composites were modeled by using some of the computation techniques. The developed convolutional neural network (CNN) is used to accurately predict the mechanical properties of these composites. The ground-truth information is used for the training process attained from the finite element analyses below the plane stress statement. After completion of the training process, the developed design is authorized using the invisible data through the training. The optimum microstructural model is identified by a developed model embedded with a genetic algorithm (GA) optimizer. The optimizer converges to conformations with highly enhanced properties. The GA optimizer is used to improve the mechanical properties to have the soft elements in the area adjacent to the tip of the crack.

Synthesis and characterization of natural fiber reinforced polymer composites as core for honeycomb core structure: A review

2018 ◽  
Vol 22 (3) ◽  
pp. 525-550 ◽  
Author(s):  
ES Zaini ◽  
MD Azaman ◽  
MS Jamali ◽  
KA Ismail
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Core Structure ◽  
Natural Fiber Composites ◽  
Honeycomb Core ◽  
Natural Fiber Composite

Researchers have worked on variety of natural fibers reinforced with polymer composites using different parameters to come up with various recommendations. The investigation involved aspects of composition materials and mechanical properties of natural fiber composites. The satisfactory results of natural fiber composites have encouraged researchers to delve deeper into the abilities of natural fiber composite in the form of a core structure. The potentiality of utilizing natural fiber composite in core design has wide potential in modern industries. This paper presents a review on natural fibers and polymer matrices commonly used in core fabrication, core design, fabricating processes of cores, and mechanical properties of cores. Ongoing research of rice husk composites to be fabricated in the form of honeycomb core structures is also discussed.

scholarly journals The Mechanical Properties Requirement for Polymer Composite Automotive Parts - A Review

2021 ◽  
Vol 1 (3) ◽  
pp. 125-133
Author(s):  
Muhamad Fitri ◽  
S. Mahzan ◽  
Fajar Anggara
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Automotive Components ◽  
Automotive Parts ◽  
Interior Walls ◽  
Natural Fiber Composite ◽  
Fiber Composite Materials

Indonesia has a large variety of natural fibers in abundance. Some of natural fibers become organic waste if not used for something needed by humans. One of the potential uses of natural fiber composite materials is to be used in automotive components. But before natural fiber composites are used in automotive components, it is necessary to examine first what are the requirements for mechanical properties or other properties required by the automotive components. Especially the automotive components which have been made from Polymers, like  dash board, Car interior walls, front and rear bumper and Car body, etc. Each of these automotive components has different function and condition, and that caused different mechanical properties needed. The purpose of this study is collecting the data from the literature, related to the properties needed for these automotive components. This study was conducted by studying the literature of research journals in the last 10 years. From the research journals, data on the requirements of mechanical properties for automotive components will be collected. Furthermore, the data of mechanical properties required for automotive components can be used as a reference to determine the reliability of automotive components made from composite

scholarly journals Valorization of Invasive Plants from Macaronesia as Filler Materials in the Production of Natural Fiber Composites by Rotational Molding

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2220
Author(s):  
Zaida Ortega ◽  
Francisco Romero ◽  
Rubén Paz ◽  
Luis Suárez ◽  
Antonio Nizardo Benítez ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Invasive Plant ◽  
Natural Fiber ◽  
Ricinus Communis ◽  
Local Level ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Filler Materials ◽  
Natural Fiber Composites ◽  
Rotational Molding

This paper compares the mechanical properties of different natural fiber composites produced by rotational molding as a way of waste valorization from campaigns to control invasive plant species in Macaronesia. Rotomolded parts produced with polymeric matrices (polyethylene) and filled with up to 20% by weight of cellulosic fibers obtained from Arundo donax L., Pennisetum setaceum, and Ricinus communis plants were characterized in terms of tensile, flexural, and impact strength. It was found that the sieving of natural fibers allowed for their introduction in higher loadings, from 10 (for un-sieved material) to 20%; fiber size greatly affected the mechanical properties of the final parts, although some combinations were proven not to reduce the mechanical properties of the neat resin. This study is a first approach to the valorization of residues obtained from periodic campaigns of the control of invasive species performed by public authorities, usually at the local level. It is important to highlight that the main objective of this research did not focus on economically profitable activity; instead, it was focused on the reduction of wastes to be disposed from ecosystem maintenance actions and the investment of potential income into preservation policies.

Predictions of the Mechanical Performance of Leaf Fiber Thermoplastic Composites by FEA

2021 ◽  
Author(s):  
Faris M. AL-Oqla
Keyword(s):  
Composite Materials ◽  
Cantilever Beam ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Fiber Types ◽  
Natural Fiber Composites ◽  
Pull Out ◽  
Structural Applications

The available potential plant waste could be worthy material to strengthen polymers to make sustainable products and structural components. Therefore, modeling the natural fiber polymeric-based composites is currently required to reveal the mechanical performance of such polymeric green composites for various green products. This work numerically investigates the effect of various fiber types, fiber loading, and reinforcement conditions with different polymer matrices towards predicting the mechanical performance of such natural fiber composites. Cantilever beam and compression schemes were considered as two different mechanical loading conditions for structural applications of such composite materials. Finite element analysis was conducted to modeling the natural fiber composite materials. The interaction between the fibers and the matrices was considered as an interfacial friction force and was determined from experimental work by the pull out technique for each polymer and fiber type. Both polypropylene and polyethylene were considered as composite matrices. Olive and lemon leaf fibers were considered as reinforcements. Results have revealed that the deflection resistance of the natural fiber composites in cantilever beam was enhanced for several reinforcement conditions. The fiber reinforcement was capable of enhancing the mechanical performance of the polymers and was the best in case of 20 wt.% polypropylene/lemon composites due to better stress transfer within the composite. However, the 40 wt.% case was the worst in enhancing the mechanical performance in both cantilever beam and compression cases. The 30 wt.% of polyethylene/olive fiber was the best in reducing the deflection of the cantilever beam case. The prediction of mechanical performance of natural fiber composites via proper numerical analysis would enhance the process of selecting the appropriate polymer and fiber types. It can contribute finding the proper reinforcement conditions to enhance the mechanical performance of the natural fiber composites to expand their reliable implementations in more industrial applications.

scholarly journals Effect of Fungal Deterioration on Physical and Mechanical Properties of Hemp and Flax Natural Fiber Composites

Materials ◽  
2017 ◽  
Vol 10 (11) ◽  
pp. 1252 ◽  
Author(s):  
Bryn Crawford ◽  
Sepideh Pakpour ◽  
Negin Kazemian ◽  
John Klironomos ◽  
Karen Stoeffler ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Physical And Mechanical Properties ◽  
Fiber Composites ◽  
Natural Fiber Composites ◽  
Fungal Deterioration

scholarly journals Mechanical properties of natural fiber composites produced using dynamic sheet former

2018 ◽  
Vol 15 (2) ◽  
pp. 76-86 ◽  
Author(s):  
Liva Pupure ◽  
Janis Varna ◽  
Roberts Joffe ◽  
Fredrik Berthold ◽  
Arttu Miettinen
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composites ◽  
Natural Fiber Composites

scholarly journals Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites

Fibers ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 59 ◽  
Author(s):  
Yunlong Jia ◽  
Bodo Fiedler
Keyword(s):  
Mechanical Properties ◽  
Furfuryl Alcohol ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Tensile Tests ◽  
Fiber Composites ◽  
Flax Fiber ◽  
Moisture Resistance ◽  
Structural Applications ◽  
Pre Treatment

Poor moisture resistance of natural fiber reinforced bio-composites is a major concern in structural applications. Many efforts have been devoted to alleviate degradation of bio-composites caused by moisture absorption. Among them, fiber pre-treatment has been proven to be effective. This paper proposes an alternative “green” fiber pretreatment with furfuryl alcohol. Pre-treatments with different parameters were performed and the influence on the mechanical properties of fiber bundles and composites was investigated. Moisture resistance of composites was evaluated by water absorption tests. Mechanical properties of composites with different water contents were analyzed in tensile tests. The results show that furfuryl alcohol pretreatment is a promising method to improve moisture resistance and mechanical properties (e.g., Young’s modulus increases up to 18%) of flax fiber composites.

Sign in / Sign up

Export Citation Format

Share Document