scholarly journals New Weighted Lomax (NWL) Distribution with Applications to Real and Simulated Data

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Huda M. Alshanbari ◽  
Muhammad Ijaz ◽  
Syed Muhammad Asim ◽  
Abd Al-Aziz Hosni El-Bagoury ◽  
Javid Gani Dar

The rationale of the paper is to present a new probability distribution that can model both the monotonic and nonmonotonic hazard rate shapes and to increase their flexibility among other probability distributions available in the literature. The proposed probability distribution is called the New Weighted Lomax (NWL) distribution. Various statistical properties have been studied including with the estimation of the unknown parameters. To achieve the basic objectives, applications of NWL are presented by means of two real-life data sets as well as a simulated data. It is verified that NWL performs well in both monotonic and nonmonotonic hazard rate function than the Lomax (L), Power Lomax (PL), Exponential Lomax (EL), and Weibull Lomax (WL) distribution.

2020 ◽  
Vol 8 (2) ◽  
pp. 521-548
Author(s):  
Rafid Alshkaki

In this paper, a generalized modification of the Kumaraswamy distribution is proposed, and its distributional and characterizing properties are studied. This distribution is closed under scaling and exponentiation, and has some well-known distributions as special cases, such as the generalized uniform, triangular, beta, power function, Minimax, and some other Kumaraswamy related distributions. Moment generating function, Lorenz and Bonferroni curves, with its moments consisting of the mean, variance, moments about the origin, harmonic, incomplete, probability weighted, L, and trimmed L moments, are derived. The maximum likelihood estimation method is used for estimating its parameters and applied to six different simulated data sets of this distribution, in order to check the performance of the estimation method through the estimated parameters mean squares errors computed from the different simulated sample sizes. Finally, four real-life data sets are used to illustrate the usefulness and the flexibility of this distribution in application to real-life data.  


2017 ◽  
Vol 51 (1) ◽  
pp. 41-60
Author(s):  
C. SATHEESH KUMAR ◽  
S. H. S. DHARMAJA

In this paper, we consider a class of bathtub-shaped hazard function distribution through modifying the Kies distribution and investigate some of its important properties by deriving expressions for its percentile function, raw moments, stress-strength reliability measure etc. The parameters of the distribution are estimated by the method of maximum likelihood and discussed some of its reliability applications with the help of certain real life data sets. In addition, the asymptotic behavior of the maximum likelihood estimators of the parameters of the distribution is examined by using simulated data sets.


2020 ◽  
Vol 70 (1) ◽  
pp. 193-212
Author(s):  
Farrukh Jamal ◽  
Christophe Chesneau ◽  
M. Arslan Nasir ◽  
Abdus Saboor ◽  
Emrah Altun ◽  
...  

AbstractIn this paper, we propose a new three-parameter modified Burr XII distribution based on the standard Burr XII distribution and the composition technique developed by [14]. Among others, we show that this technique has the ability to significantly increase the flexibility of the former Burr XII distribution, with respect to the density and hazard rate shapes. Also, complementary theoretical aspects are studied as shapes, asymptotes, quantiles, useful expansion, moments, skewness, kurtosis, incomplete moments, moments generating function, stochastic ordering, reliability parameter and order statistics. Then, a Monte Carlo simulation study is carried out to assess the performance of the maximum likelihood estimates of the modified Burr XII model parameters. Finally, three applications to real-life data sets are presented, with models comparisons. The results are favorable for the new modified Burr XII model.


Author(s):  
Muzamil Jallal ◽  
Aijaz Ahmad ◽  
Rajnee Tripathi

In this study a new generalisation of Rayleigh Distribution has been studied and referred it is as “A New Two-Parametric Maxwell-Rayleigh Distribution”. This distribution is obtained by adopting T-X family procedure. Several distributional properties of the formulated distribution including moments, moment generating function, Characteristics function and incomplete moments have been discussed. The expressions for ageing properties have been derived and discussed explicitly. The behaviour of the pdf and Hazard rate function has been illustrated through different graphs. The parameters are estimated through the technique of MLE. Eventually the versatility and the efficacy of the formulated distribution have been examined through real life data sets related to engineering science.


Author(s):  
Mohamed Ibrahim Mohamed ◽  
Laba Handique ◽  
Subrata Chakraborty ◽  
Nadeem Shafique Butt ◽  
Haitham M. Yousof

In this article an attempt is made to introduce a new extension of the Fréchet model called the Xgamma Fréchet model. Some of its properties are derived. The estimation of the parameters via different estimation methods are discussed. The performances of the proposed estimation methods are investigated through simulations as well as real life data sets. The potentiality of the proposed model is established through modelling of two real life data sets. The results have shown clear preference for the proposed model compared to several know competing ones.


Author(s):  
Adebisi Ade Ogunde ◽  
Gbenga Adelekan Olalude ◽  
Donatus Osaretin Omosigho

In this paper we introduced Gompertz Gumbel II (GG II) distribution which generalizes the Gumbel II distribution. The new distribution is a flexible exponential type distribution which can be used in modeling real life data with varying degree of asymmetry. Unlike the Gumbel II distribution which exhibits a monotone decreasing failure rate, the new distribution is useful for modeling unimodal (Bathtub-shaped) failure rates which sometimes characterised the real life data. Structural properties of the new distribution namely, density function, hazard function, moments, quantile function, moment generating function, orders statistics, Stochastic Ordering, Renyi entropy were obtained. For the main formulas related to our model, we present numerical studies that illustrate the practicality of computational implementation using statistical software. We also present a Monte Carlo simulation study to evaluate the performance of the maximum likelihood estimators for the GGTT model. Three life data sets were used for applications in order to illustrate the flexibility of the new model.


2021 ◽  
Vol 40 (1) ◽  
pp. 1597-1608
Author(s):  
Ilker Bekmezci ◽  
Murat Ermis ◽  
Egemen Berki Cimen

Social network analysis offers an understanding of our modern world, and it affords the ability to represent, analyze and even simulate complex structures. While an unweighted model can be used for online communities, trust or friendship networks should be analyzed with weighted models. To analyze social networks, it is essential to produce realistic social models. However, there are serious differences between social network models and real-life data in terms of their fundamental statistical parameters. In this paper, a genetic algorithm (GA)-based social network improvement method is proposed to produce social networks more similar to real-life data sets. First, it creates a social model based on existing studies in the literature, and then it improves the model with the proposed GA-based approach based on the similarity of the average degree, the k-nearest neighbor, the clustering coefficient, degree distribution and link overlap. This study can be used to model the structural and statistical properties of large-scale societies more realistically. The performance results show that our approach can reduce the dissimilarity between the created social networks and the real-life data sets in terms of their primary statistical properties. It has been shown that the proposed GA-based approach can be used effectively not only in unweighted networks but also in weighted networks.


2020 ◽  
Vol 35 (1) ◽  
pp. 25-38 ◽  
Author(s):  
E. I. Abdul Sathar ◽  
Jitto Jose

AbstractRecently, A. S. Krishnan, S. M. Sunoj and N. U. Nair [Some reliability properties of extropy for residual and past lifetime random variables, J. Korean Stat. Soc. 2020, 10.1007/s42952-019-00023-x] introduced past extropy for measuring uncertainty contained in past lifetime of random variables. In the present study, we focus on the past extropy of k-records. The motivation for considering past extropy of k-records has been discussed in detail. We have also illustrated the merit of considering past extropy of k-records over past extropy of classical records and past extropy of original random sample using two real life data sets. Some important properties of past extropy of k-records are discussed in this work. We have expressed past extropy of k-records using past extropy of k-records arising from uniform distribution. The work proposes a simple estimator for past extropy of k-records as well.


2004 ◽  
Vol 03 (01) ◽  
pp. 1-7
Author(s):  
B. Chandra ◽  
Gaurav Saxena

The paper proposes a new selection measure for classification using decision trees for Data mining. Various algorithms have been proposed in the past for classification using decision trees viz. ID3, CART, SLIQ, etc. Selection measures like the Gain, Gain ratio, and Gini index have been proposed in these algorithms. However, none of the selection measures developed so far take into account the balancing of trees. This paper proposes a new selection measure which also takes into account the balancing of trees that will facilitate in improving the classification accuracy. The performance of the original SLIQ algorithm, C5 and the algorithm using the new selection measure (which takes into account the accuracy as well as the balance factor) was measured on the basis of the classification accuracy. Three real life data sets were chosen for this purpose.


2014 ◽  
Vol 2014 ◽  
pp. 1-17
Author(s):  
Bingjiao Fan ◽  
Weihua Xu ◽  
Jianhang Yu

This paper focuses on constructing uncertainty measures by the pure rough set approach in ordered information system. Four types of definitions of lower and upper approximations and corresponding uncertainty measurement concepts including accuracy, roughness, approximation quality, approximation accuracy, dependency degree, and importance degree are investigated. Theoretical analysis indicates that all the four types can be used to evaluate the uncertainty in ordered information system, especially that we find that the essence of the first type and the third type is the same. To interpret and help understand the approach, experiments about real-life data sets have been conducted to test the four types of uncertainty measures. From the results obtained, it can be shown that these uncertainty measures can surely measure the uncertainty in ordered information system.


Sign in / Sign up

Export Citation Format

Share Document