scholarly journals Evaluation of the Effect of Intensive Nursing Intervention Based on Process Analysis

2021 ◽  
Vol 2021 ◽  
pp. 1-11 ◽  
Author(s):  
Zhiying Zhang ◽  
Huiju Zhu
Keyword(s):  
Business Process ◽  
Medical Staff ◽  
Process Analysis ◽  
Nursing Intervention ◽  
Work Flow ◽  
Emergency Nursing ◽  
Rescue Work ◽  
Efficiency And Effectiveness ◽  
New Business ◽  
Key Indicators

In order to achieve significant improvements in the evaluation of key indicators such as speed, quality, cost, and service, this paper fundamentally rethinks and completely redesigns the business process, and recreates a new business process. This study combines the particularity of AMI with emergency nursing to construct an in-hospital AMI emergency nursing process to further standardize the AMI rescue work. The implementation of the process helps to clarify the responsibilities and requirements of nurses in the AMI emergency process, reduce the delay time of AMI emergency, and improve the efficiency and effectiveness of emergency. In addition, after refactoring the business process, this paper builds an intelligent digital critical illness monitoring system. This system combines the original work flow of the ICU medical staff, optimizes the work flow of the medical staff through computer technology and information technology, and designs and completes the digital intensive nursing system software to run and use in the hospital and obtain significant results.

Business Process Analysis

2011 ◽  
pp. 78-82 ◽  
Author(s):  
Jesu´s Arias Fisteus ◽  
Carlos Delgado Kloos
Keyword(s):  
Business Process ◽  
Business Processes ◽  
Process Analysis ◽  
Process Models ◽  
Work Flow ◽  
Functional Verification ◽  
Flow Management ◽  
Business Process Analysis ◽  
And Performance ◽  
Work Flow Management

Business-process management (BPM) is nowadays a key technology for the automation and support of processes in medium-sized and large organizations. This technology has been successfully applied to business-to-consumer (B2C) and business-to-business (B2B) e-commerce since the ’90s, and it is now being applied also in e-government for the management of administrative procedures. As stated in Aalst, Hofstede, and Weske (2003), the origins of BPM technologies can be found in the ’70s with the research on office information systems. Research in this area was almost stopped in the ’80s, but it rose again in the ’90s under the name of work-flow management. Now it is evolving with a more integral approach and a new name: BPM. It is defined in Aalst, Hofstede, and Weske (2003, p. 4) as “supporting business processes using methods, techniques, and software to design, enact, control, and analyze operational processes involving humans, organizations, applications, documents and other sources of information.” The main functionalities provided by a BPM system are defining business processes, automatically enacting them, controlling their enactment, and analyzing them. This article is focused on the last functionality: business-process analysis (BPA). BPA can be defined as a set of technologies that provide support for obtaining relevant properties of business-process models in order to reason about them, detect functional errors, or improve their performance. BPA was a neglected area in the work-flow management systems developed in the ’90s. Will van der Aalst (1998) was one of the first researchers in this field. He proposed the use of petri nets for modeling business processes and the application of the analysis theory developed for this formalism to demonstrate the correctness of the developed processes, analyze performance, and so forth. Since then, other approaches, based on formal methods, were proposed. BPA is important for BPM because it provides the technology for improving the reliability and efficiency of the business process of organizations. Reliability considerably reduces expenses caused by errors in transactions. Efficiency reduces expenses caused by an inefficient use of resources and can improve the satisfaction of customers. The next section provides a background on the most important analysis technologies: functional verification and performance measuring. Then, the discussion is focused on functional verification. An overview on how different authors applied functional verification to business processes is presented. Then these works are analyzed and an open, modular, and extensible architecture for the functional verification of business processes is presented. Later, the future trends on this topic are outlined. Finally, the conclusion highlights the main concepts introduced in this article.

Business Process Analysis

2011 ◽  
pp. 691-697
Author(s):  
Jesús Arias Fisteus ◽  
Carlos Delgado Kloos
Keyword(s):  
Business Process ◽  
Business Processes ◽  
Process Analysis ◽  
Process Models ◽  
Work Flow ◽  
Functional Verification ◽  
Flow Management ◽  
Business Process Analysis ◽  
And Performance ◽  
Work Flow Management

Business-process management (BPM) is nowadays a key technology for the automation and support of processes in medium-sized and large organizations. This technology has been successfully applied to business-to-consumer (B2C) and business-to-business (B2B) e-commerce since the ’90s, and it is now being applied also in e-government for the management of administrative procedures. As stated in Aalst, Hofstede, and Weske (2003), the origins of BPM technologies can be found in the ’70s with the research on office information systems. Research in this area was almost stopped in the ’80s, but it rose again in the ’90s under the name of work-flow management. Now it is evolving with a more integral approach and a new name: BPM. It is defined in Aalst, Hofstede, and Weske (2003, p. 4) as “supporting business processes using methods, techniques, and software to design, enact, control, and analyze operational processes involving humans, organizations, applications, documents and other sources of information.” The main functionalities provided by a BPM system are defining business processes, automatically enacting them, controlling their enactment, and analyzing them. This article is focused on the last functionality: business-process analysis (BPA). BPA can be defined as a set of technologies that provide support for obtaining relevant properties of business-process models in order to reason about them, detect functional errors, or improve their performance. BPA was a neglected area in the work-flow management systems developed in the ’90s. Will van der Aalst (1998) was one of the first researchers in this field. He proposed the use of petri nets for modeling business processes and the application of the analysis theory developed for this formalism to demonstrate the correctness of the developed processes, analyze performance, and so forth. Since then, other approaches, based on formal methods, were proposed. BPA is important for BPM because it provides the technology for improving the reliability and efficiency of the business process of organizations. Reliability considerably reduces expenses caused by errors in transactions. Efficiency reduces expenses caused by an inefficient use of resources and can improve the satisfaction of customers. The next section provides a background on the most important analysis technologies: functional verification and performance measuring. Then, the discussion is focused on functional verification. An overview on how different authors applied functional verification to business processes is presented. Then these works are analyzed and an open, modular, and extensible architecture for the functional verification of business processes is presented. Later, the future trends on this topic are outlined. Finally, the conclusion highlights the main concepts introduced in this article.

Implementasi Analisis Proses Bisnis Sebagai Upaya Pengurangan Biaya

2019 ◽  
Vol 10 (1) ◽  
pp. 1-27
Author(s):  
Aniek Wijayanti
Keyword(s):  
Business Process ◽  
Cost Reduction ◽  
Process Analysis ◽  
Value Added ◽  
Added Value ◽  
Natural Material ◽  
Management Activity ◽  
Procurement Process ◽  
Material Procurement ◽  
The Cost

Business Process Analysis can be used to eliminate or reduce a waste cost caused by non value added activities that exist in a process. This research aims at evaluating activities carried out in the natural material procurement process in the PT XYZ, calculating the effectiveness of the process cycle, finding a way to improve the process management, and calculating the cost reduction that can achieved by activity management. A case study was the approach of this research. The researcher obtained research data throughout deep interviews with the staff who directly involved in the process, observation, and documentation of natural material procurement. The result of this study show that the effectiveness of the process cycle of natural material procurement in the factory reached as much as 87,1% for the sand material and 72% for the crushed stone. This indicates that the process still carry activities with no added value and still contain ineffective costs. Through the Business Process Mechanism, these non value added activities can be managed so that the process cycle becomes more efficient and cost effectiveness is achieved. The result of the effective cycle calculation after the management activities implementation is 100%. This means that the cost of natural material procurement process has become effective. The result of calculation of the estimated cost reduction as a result of management activity is as much as Rp249.026.635,90 per year.

scholarly journals Relation between process and service logics

2013 ◽  
Vol 61 (2) ◽  
pp. 411-416
Author(s):  
Milan Mišovič ◽  
Jan Turčínek
Keyword(s):  
Information Systems ◽  
Business Process ◽  
Business Processes ◽  
Process Analysis ◽  
Information Modeling ◽  
General Context ◽  
Enterprise Information ◽  
Business Services ◽  
Enterprise Information Systems ◽  
Information Engineering

It is generally accepted that the process control of a small and medium-sized manufacturing business enterprise is the foundation of high quality care of firm’s business processes. Any business process is seen as an indivisible sequence of activity steps designed to perform complex business activities. In its statutory documents the company should have concise descriptions of at least the main processes, along with their contexts in a given department of the company and the employee position.The main business processes, of course many others, are not immutable, on the contrary, they are very often changing. Many processes occur, others are modified others disappear as antiquated and useless to support strategic business objectives. All this is a consequence of the firms’ effort needed to maintain competitiveness in the harsh and dynamic consumer market.Business processes are not isolated, many of them are part of a relatively large process chains, so-called enterprise services, see (Erl, 2005). The discipline of Software Engineering responded to the possibility of consolidating enterprise functionality with enterprise services with the method SOA (Service Oriented Architecture) leading to new applications for enterprise information systems.In contrast to business processes, business services are still not sufficiently recognized in the statutory documents of enterprises. Informaticians, producing software applications for enterprise information systems, must draw on company management knowledge relating to the general context and processes together with management to prepare business services. There are therefore more relevant questions based on the emergence of corporate services and information modeling in the discipline of Information Engineering. Acceptable responses are not included in a lot of publications or in publications of the doyen of SOA Thomas Erl, see (Erl, 2006) and thus the proposed SOA paradigm suffers from the same problem.The present article tries to give an answer to those questions and show the relevant theoretical basis for finding service solutions of business process logic. Furthermore, this article wants to show possible conversions of known methods of process analysis of Information Engineering disciplines, such as the method Eriksson – Penker Business Extensions, or the method ARIS by prof. Scheer, into the platform of enterprise services.

Sign in / Sign up

Export Citation Format

Share Document