scholarly journals Internet of things (IoT) based smart garbage monitoring system

Author(s):  
Thangavel Bhuvaneswari ◽  
J. Hossen ◽  
NurAsyiqinbt. Amir Hamzah ◽  
P. Velrajkumar ◽  
Oo Hong Jack

<p>Garbage waste monitoring, collection and management is one of the primary concerns of the present era due to its detrimental effects on environment. The traditional way of manually monitoring and collecting the garbage is a cumbersome process as it requires considerable human effort and time leading to higher cost. In this paper, an IoT based garbage monitoring system using Thingspeak, an open IoT platform is presented. The system consists of an Arduino microcontroller, an ultrasonic sensor, a load cell and a Wi-Fi module. The Arduino microcontroller receives data from the ultrasonic sensor and load cell. The depth of the garbage in the bin is measured using ultrasonic sensor and the weight of the bin with garbage is measured from the load cell. The LCD screen is used to display the data. The Wi-Fi module transmits the above data to the internet. An open IoT platform Thingspeak is used to monitor the garbage system. With this system, the administrator can monitor and schedule garbage collection more efficiently. A prototype has been developed and tested. It has been found to work satisfactorily. The details are presented in this paper.</p>

SinkrOn ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 129
Author(s):  
Rudi Arif Candra ◽  
Devi Satria Saputra ◽  
Dirja Nur Ilham ◽  
Herry Setiawan ◽  
Hardisal Hardisal

This study discusses the infusion detection device in a hospital room. This tool is designed to help hospital nurses to cope more quickly to avoid problems due to the infusion. Load cell sensors are used as heavy detectors that send notifications to the nurses through the telegram application that has been installed. The nurse will get a notification message sent to the telegram if the sensor has read the weight. The tool is made using a load cell sensor and NodeMCU Wi-FiESP866 which functions to send notification of the results of sensor data input to the Internet of Things (IOT) platform namely Telegram. Nurses need to be connected to the internet network to get notifications on the telegram. Test results show that the time needed to send and receive notifications on Telegram takes about 2-5 seconds. The message will be sent 3 times, first the infusion WARNING is almost exhausted (alert), second the infusion WARNING is almost exhausted (standby) and the infusion WARNING is almost exhausted (please replace). If the infusion is not replaced by the nurse, it will be warned by Buzzer. However, time can be influenced by the available internet network connectivity. However, time can be affected by the available internet network.


Author(s):  
Kushal O. Wadatkar

“Swachh Bharat” is a national campaign by the statutory cities and towns to clean the roads streets and infrastructure of the country. When the massive amount of waste material is collected, it is difficult to separate and unhygienic. Now a day’s garbage is separately thrown i.e. dry and wet. The Internet of Things (IoT) shall be able to incorporate transparently and coherently a large number of different and heterogeneous end systems, while providing open access to selected subsets of data for the developing a digital services. Building a general architecture for the IoT is hence a very complex task, mainly because of the extremely large variety of devices, link layer technologies. One of the main concerns with our environment has been solid waste management which in addition to disturbing the balance of the environment also has adverse effects on the health of the society. The detection, monitoring and management of wastes are one of the primary problems of the present period. The traditional way of manually monitoring the wastes in waste bins is a complex, cumbersome process and utilizes more human effort, time and cost which is not compatible with the present day technologies in any way. This is an advanced method in which waste management is automated. In this “IOT based garbage monitoring system” The separate the wet and dry garbage using the moisturized sensor. This system is based on the separation and monitoring of garbage using Arduino Uno, Wi-Fi-module, ultrasonic sensor. Online identification of the garbage level using IOT, ultrasonic sensor and Wi-Fi module makes this system more effective than other system.


2020 ◽  
Author(s):  
Tanweer Alam ◽  
Mohamed Benaida

Building the innovative blockchain-based architecture across the Internet of Things (IoT) platform for the education system could be an enticing mechanism to boost communication efficiency within the 5 G network. Wireless networking would have been the main research area allowing people to communicate without using the wires. It was established at the start of the Internet by retrieving the web pages to connect from one computer to another computer Moreover, high-speed, intelligent, powerful networks with numerous contemporary technologies, such as low power consumption, and so on, appear to be available in today's world to connect among each other. The extension of fog features on physical things under IoT is allowed in this situation. One of the complex tasks throughout the area of mobile communications would be to design a new virtualization framework based on blockchain across the Internet of Things architecture. The goal of this research is to connect a new study for an educational system that contains Blockchain to the internet of things or keeping things cryptographically secure on the internet. This research combines with its improved blockchain and IoT to create an efficient interaction system between students, teachers, employers, developers, facilitators and accreditors on the Internet. This specified framework is detailed research's great estimation.


Sign in / Sign up

Export Citation Format

Share Document