High Performance Top-Emission Quantum Dot Light-Emitting Diodes with Mg-Doped ZnO Nanoparticles Used as an Electron Transport Layer

2021 ◽  
Vol 21 (7) ◽  
pp. 3747-3752
Author(s):  
Bada Kim ◽  
Dohyeong Lee ◽  
Boram Hwang ◽  
Yebin Eun ◽  
Mi-Young Ha ◽  
...  

In this paper, we reported superior performance of solution-processed top-emission quantum dot light-emitting diodes (TE-QLEDs) with Mg-doped ZnO nanoparticle (NP) electron transport layer (ETL). The Mg-doped ZnO NPs were synthesized by the sol-gel method. Transmission electron microscopy (TEM) analysis of the Mg-doped ZnO NPs with 0 wt%, 5 wt%, 10 wt%, and 15 wt% Mg-doping concentrations revealed average diameters of 5.86 nm, 5.33 nm, 4.52 nm, and 4.37 nm, respectively. The maximum luminance, the current efficiency, and external quantum efficiency (EQE) were 178,561.8 cd/m2, 56.0 cd/A, and 14.43%, respectively. However, for the best performance of TE-QLED without Mg-doping in the ZnO NPs, the maximum luminance was only 101,523.4 cd/m2, the luminous efficiency was 27.8 cd/A, and the EQE was 6.91%. The improvement of the performance is attributed to the suppression of electron transfer by an increase in the energy barrier between the cathode and Mg-doped ZnO NP ETL and the reduction in the Hall mobility of electron with increasing the Mg-doping in the ZnO NPs, resulting in the enhanced charge balance in the quantum dot (QD) emitting layer (EML).

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1246
Author(s):  
Binbin Zhang ◽  
Yu Luo ◽  
Chaohuang Mai ◽  
Lan Mu ◽  
Miaozi Li ◽  
...  

An environment-friendly inverted indium phosphide red quantum dot light-emitting diode (InP QLED) was fabricated using Mg-doped zinc oxide (ZnMgO) as the electron transport layer (ETL). The effects of ZnMgO ETL on the performance of InP QLED were investigated. X-ray diffraction (XRD) analysis indicated that ZnMgO film has an amorphous structure, which is similar to zinc oxide (ZnO) film. Comparison of morphology between ZnO film and ZnMgO film demonstrated that Mg-doped ZnO film remains a high-quality surface (root mean square roughness: 0.86 nm) as smooth as ZnO film. The optical band gap and ultraviolet photoelectron spectroscopy (UPS) analysis revealed that the conduction band of ZnO shifts to a more matched position with InP quantum dot after Mg-doping, resulting in the decrease in turn-on voltage from 2.51 to 2.32 V. In addition, the ratio of irradiation recombination of QLED increases from 7% to 25% using ZnMgO ETL, which can be attributed to reduction in trap state by introducing Mg ions into ZnO lattices. As a result, ZnMgO is a promising material to enhance the performance of inverted InP QLED. This work suggests that ZnMgO has the potential to improve the performance of QLED, which consists of the ITO/ETL/InP QDs/TCTA/MoO3/Al, and Mg-doping strategy is an efficient route to directionally regulate ZnO conduction bands.


2019 ◽  
Vol 75 ◽  
pp. 105411 ◽  
Author(s):  
Rashed Alsharafi ◽  
Yangbin Zhu ◽  
Fushan Li ◽  
Zhongwei Xu ◽  
Hailong Hu ◽  
...  

2021 ◽  
Vol 59 (7) ◽  
pp. 476-480
Author(s):  
Moonbon Kim ◽  
Jiwan Kim

We report highly efficient and robust quantum dot light-emitting diodes (QLEDs) with Li-doped TiO2 nanoparticles (NPs) as an electron transport layer (ETL). As core materials, ZnO-based inorganic NPs can enhance the performance of QLEDs due to their suitable energy level and solution processability. However, their fast electron mobility and instability in organic solvents are two main obstacles to practical display applications. The colloidal stability of TiO2 NPs in ethanol was confirmed after three day-storage, while ZnO NPs showed severe agglomeration. Inverted structure QLEDs using 3% Li-doped TiO2 NP were successfully fabricated and their optical/electrical properties were investigated. With 3% Li-doped TiO2 NPs, the charge balance in the emitting layer of the QLEDs was improved, which resulted in a maximum luminance of 159,840 cd/m2 and external quantum efficiency (EQE) of 9.12%. These results were comparable to the performance of QLEDs with commonly used ZnO NPs. Moreover, the QLEDs with the Li-doped TiO2 NPs showed more stable characteristics than those with ZnO NPs after 7 days in ambient conditions. The EQE of the QLEDs with Li-doped TiO2 NPs was reduced by only 4.9%. These results indicate that Li-doped TiO2 NPs show great promise for use as a solution based inorganic ETL for QLEDs.


2021 ◽  
Vol MA2021-01 (23) ◽  
pp. 897-897
Author(s):  
Hyung Seok Choi ◽  
Yohan Kim ◽  
Jiyong Kim ◽  
André Geßner ◽  
Armin Wedel

Sign in / Sign up

Export Citation Format

Share Document