scholarly journals Combined Dynamical and Statistical Downscaling for High-Resolution Projections of Multiple Climate Variables in the Beijing–Tianjin–Hebei Region of China

2019 ◽  
Vol 58 (11) ◽  
pp. 2387-2403 ◽  
Author(s):  
Zhenyu Han ◽  
Ying Shi ◽  
Jia Wu ◽  
Ying Xu ◽  
Botao Zhou

AbstractHigh-resolution combined dynamical and statistical downscaling for multivariables (HDM) was performed in the Beijing–Tianjin–Hebei (BTH) region by using observations from China Meteorological Administration Land Data Assimilation System (CLDAS), a regional climate model (RCM), and quantile mapping. This resulted in the production of a daily product with six variables (daily mean, maximum, and minimum temperature; precipitation; relative humidity; and wind speed), five ensemble members, a multidecadal time span (1980–2099), and a high resolution (6.25 km) for climate change projections under the RCP4.5 scenario. The evaluation showed that the HDM output could reproduce well the mean states of all variables and most extreme indices except the consecutive dry and wet days. The biases in the magnitude of interannual variability in HDM were mostly inherited from the RCM. By using the HDM, future projection over BTH was conducted. The results indicated that the annual mean temperature and precipitation as well as extreme heat and heavy precipitation events will increase over most regions. The warming magnitudes over the mountainous and coastal area at the northern BTH and the wetting magnitudes over the Daqinghe River basin (DRB) within BTH will be relatively stronger. The increases in extreme heat events will be much larger in the plain area. More than one-half of regions with the large extreme precipitation increase will be located within DRB. Both the number of models with the same sign of change and the ensemble standard deviation were used to estimate the projection uncertainty. The projected changes and uncertainties over DRB and subregions and Xiong’an city within the basin for each season are also discussed.

Atmosphere ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 622
Author(s):  
Tugba Ozturk ◽  
F. Sibel Saygili-Araci ◽  
M. Levent Kurnaz

In this study, projected changes in climate extreme indices defined by the Expert Team on Climate Change Detection and Indices were investigated over Middle East and North Africa. Changes in the daily maximum and minimum temperature- and precipitation- based extreme indices were analyzed for the end of the 21st century compared to the reference period 1971–2000 using regional climate model simulations. Regional climate model, RegCM4.4 was used to downscale two different global climate model outputs to 50 km resolution under RCP4.5 and RCP8.5 scenarios. Results generally indicate an intensification of temperature- and precipitation- based extreme indices with increasing radiative forcing. In particular, an increase in annual minimum of daily minimum temperatures is more pronounced over the northern part of Mediterranean Basin and tropics. High increase in warm nights and warm spell duration all over the region with a pronounced increase in tropics are projected for the period of 2071–2100 together with decrease or no change in cold extremes. According to the results, a decrease in total wet-day precipitation and increase in dry spells are expected for the end of the century.


2020 ◽  
Vol 12 (4) ◽  
pp. 2959-2970
Author(s):  
Maialen Iturbide ◽  
José M. Gutiérrez ◽  
Lincoln M. Alves ◽  
Joaquín Bedia ◽  
Ruth Cerezo-Mota ◽  
...  

Abstract. Several sets of reference regions have been used in the literature for the regional synthesis of observed and modelled climate and climate change information. A popular example is the series of reference regions used in the Intergovernmental Panel on Climate Change (IPCC) Special Report on Managing the Risks of Extreme Events and Disasters to Advance Climate Adaptation (SREX). The SREX regions were slightly modified for the Fifth Assessment Report of the IPCC and used for reporting subcontinental observed and projected changes over a reduced number (33) of climatologically consistent regions encompassing a representative number of grid boxes. These regions are intended to allow analysis of atmospheric data over broad land or ocean regions and have been used as the basis for several popular spatially aggregated datasets, such as the Seasonal Mean Temperature and Precipitation in IPCC Regions for CMIP5 dataset. We present an updated version of the reference regions for the analysis of new observed and simulated datasets (including CMIP6) which offer an opportunity for refinement due to the higher atmospheric model resolution. As a result, the number of land and ocean regions is increased to 46 and 15, respectively, better representing consistent regional climate features. The paper describes the rationale for the definition of the new regions and analyses their homogeneity. The regions are defined as polygons and are provided as coordinates and a shapefile together with companion R and Python notebooks to illustrate their use in practical problems (e.g. calculating regional averages). We also describe the generation of a new dataset with monthly temperature and precipitation, spatially aggregated in the new regions, currently for CMIP5 and CMIP6, to be extended to other datasets in the future (including observations). The use of these reference regions, dataset and code is illustrated through a worked example using scatter plots to offer guidance on the likely range of future climate change at the scale of the reference regions. The regions, datasets and code (R and Python notebooks) are freely available at the ATLAS GitHub repository: https://github.com/SantanderMetGroup/ATLAS (last access: 24 August 2020), https://doi.org/10.5281/zenodo.3998463 (Iturbide et al., 2020).


2011 ◽  
Vol 12 (1) ◽  
pp. 84-100 ◽  
Author(s):  
Csaba Torma ◽  
Erika Coppola ◽  
Filippo Giorgi ◽  
Judit Bartholy ◽  
Rita Pongrácz

Abstract This paper presents a validation study for a high-resolution version of the Regional Climate Model version 3 (RegCM3) over the Carpathian basin and its surroundings. The horizontal grid spacing of the model is 10 km—the highest reached by RegCM3. The ability of the model to capture temporal and spatial variability of temperature and precipitation over the region of interest is evaluated using metrics spanning a wide range of temporal (daily to climatology) and spatial (inner domain average to local) scales against different observational datasets. The simulated period is 1961–90. RegCM3 shows small temperature biases but a general overestimation of precipitation, especially in winter; although, this overestimate may be artificially enhanced by uncertainties in observations. The precipitation bias over the Hungarian territory, the authors’ main area of interest, is mostly less than 20%. The model captures well the observed late twentieth-century decadal-to-interannual and interseasonal variability. On short time scales, simulated daily temperature and precipitation show a high correlation with observations, with a correlation coefficient of 0.9 for temperature and 0.6 for precipitation. Comparison with two Hungarian station time series shows that the model performance does not degrade when going to the 10-km gridpoint scale. Finally, the model reproduces the spatial distribution of dry and wet spells over the region. Overall, it is assessed that this high-resolution version of RegCM3 is of sufficiently good quality to perform climate change experiments over the Carpathian region—and, in particular, the Hungarian territory—for application to impact and adaptation studies.


2008 ◽  
Vol 21 (21) ◽  
pp. 5708-5726 ◽  
Author(s):  
Eric P. Salathé ◽  
Richard Steed ◽  
Clifford F. Mass ◽  
Patrick H. Zahn

Abstract Simulations of future climate scenarios produced with a high-resolution climate model show markedly different trends in temperature and precipitation over the Pacific Northwest than in the global model in which it is nested, apparently because of mesoscale processes not being resolved at coarse resolution. Present-day (1990–99) and future (2020–29, 2045–54, and 2090–99) conditions are simulated at high resolution (15-km grid spacing) using the fifth-generation Pennsylvania State University–NCAR Mesoscale Model (MM5) system and forced by ECHAM5 global simulations. Simulations use the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) A2 emissions scenario, which assumes a rapid increase in greenhouse gas concentrations. The mesoscale simulations produce regional alterations in snow cover, cloudiness, and circulation patterns associated with interactions between the large-scale climate change and the regional topography and land–water contrasts. These changes substantially alter the temperature and precipitation trends over the region relative to the global model result or statistical downscaling. Warming is significantly amplified through snow–albedo feedback in regions where snow cover is lost. Increased onshore flow in the spring reduces the daytime warming along the coast. Precipitation increases in autumn are amplified over topography because of changes in the large-scale circulation and its interaction with the terrain. The robustness of the modeling results is established through comparisons with the observed and simulated seasonal variability and with statistical downscaling results.


2018 ◽  
Vol 51 (9-10) ◽  
pp. 3559-3577 ◽  
Author(s):  
Steven C. Chan ◽  
Ron Kahana ◽  
Elizabeth J. Kendon ◽  
Hayley J. Fowler

2005 ◽  
Vol 18 (21) ◽  
pp. 4344-4354 ◽  
Author(s):  
Christopher A. T. Ferro ◽  
Abdelwaheb Hannachi ◽  
David B. Stephenson

Abstract Anthropogenic influences are expected to cause the probability distribution of weather variables to change in nontrivial ways. This study presents simple nonparametric methods for exploring and comparing differences in pairs of probability distribution functions. The methods are based on quantiles and allow changes in all parts of the probability distribution to be investigated, including the extreme tails. Adjusted quantiles are used to investigate whether changes are simply due to shifts in location (e.g., mean) and/or scale (e.g., variance). Sampling uncertainty in the quantile differences is assessed using simultaneous confidence intervals calculated using a bootstrap resampling method that takes account of serial (intraseasonal) dependency. The methods are simple enough to be used on large gridded datasets. They are demonstrated here by exploring the changes between European regional climate model simulations of daily minimum temperature and precipitation totals for winters in 1961–90 and 2071–2100. Projected changes in daily precipitation are generally found to be well described by simple increases in scale, whereas minimum temperature exhibits changes in both location and scale.


Sign in / Sign up

Export Citation Format

Share Document