scholarly journals Evaluation of Microphysics Parameterization for Convective Clouds in the NCAR Community Atmosphere Model CAM5

2012 ◽  
Vol 25 (24) ◽  
pp. 8568-8590 ◽  
Author(s):  
Xiaoliang Song ◽  
Guang J. Zhang ◽  
J.-L. F. Li
Keyword(s):  
Large Scale ◽  
Convective Cloud ◽  
Number Concentration ◽  
Liquid Water Path ◽  
Microphysics Scheme ◽  
Convective Clouds ◽  
Community Atmosphere Model ◽  
Atmosphere Model ◽  
Subtropical Oceans ◽  
The Impact

Abstract A physically based two-moment microphysics parameterization scheme for convective clouds is implemented in the NCAR Community Atmosphere Model version 5 (CAM5) to improve the representation of convective clouds and their interaction with large-scale clouds and aerosols. The explicit treatment of mass mixing ratio and number concentration of cloud and precipitation particles enables the scheme to account for the impact of aerosols on convection. The scheme is linked to aerosols through cloud droplet activation and ice nucleation processes and to stratiform cloud parameterization through convective detrainment of cloud liquid/ice water content (LWC/IWC) and droplet/crystal number concentration (DNC/CNC). A 5-yr simulation with the new convective microphysics scheme shows that both cloud LWC/IWC and DNC/CNC are in good agreement with observations, indicating the scheme describes microphysical processes in convection well. Moreover, the microphysics scheme is able to represent the aerosol effects on convective clouds such as the suppression of warm rain formation and enhancement of freezing when aerosol loading is increased. With more realistic simulations of convective cloud microphysical properties and their detrainment, the mid- and low-level cloud fraction is increased significantly over the ITCZ–southern Pacific convergence zone (SPCZ) and subtropical oceans, making it much closer to the observations. Correspondingly, the serious negative bias in cloud liquid water path over subtropical oceans observed in the standard CAM5 is reduced markedly. The large-scale precipitation is increased and precipitation distribution is improved as well. The long-standing precipitation bias in the western Pacific is significantly alleviated because of microphysics–thermodynamics feedbacks.

scholarly journals A unified parameterization of clouds and turbulence using CLUBB and subcolumns in the Community Atmosphere Model

2015 ◽  
Vol 8 (6) ◽  
pp. 5041-5088 ◽  
Author(s):  
K. Thayer-Calder ◽  
A. Gettelman ◽  
C. Craig ◽  
S. Goldhaber ◽  
P. A. Bogenschutz ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Climate Models ◽  
Convective Cloud ◽  
Global Climate Models ◽  
Liquid Water Path ◽  
Microphysics Scheme ◽  
Cloud Forcing ◽  
Community Atmosphere Model ◽  
Atmosphere Model ◽  
Cloud Parameterization

Abstract. Most global climate models parameterize separate cloud types using separate parameterizations. This approach has several disadvantages, including obscure interactions between parameterizations and inaccurate triggering of cumulus parameterizations. Alternatively, a unified cloud parameterization uses one equation set to represent all cloud types. Such cloud types include stratiform liquid and ice cloud, shallow convective cloud, and deep convective cloud. Vital to the success of a unified parameterization is a general interface between clouds and microphysics. One such interface involves drawing Monte Carlo samples of subgrid variability of temperature, water vapor, cloud liquid, and cloud ice, and feeding the sample points into a microphysics scheme. This study evaluates a unified cloud parameterization and a Monte Carlo microphysics interface that has been implemented in the Community Atmosphere Model (CAM) version 5.3. Results describing the mean climate and tropical variability from global simulations are presented. The new model shows a degradation in precipitation skill but improvements in short-wave cloud forcing, liquid water path, long-wave cloud forcing, precipitable water, and tropical wave simulation. Also presented are estimations of computational expense and investigation of sensitivity to number of subcolumns.

scholarly journals A unified parameterization of clouds and turbulence using CLUBB and subcolumns in the Community Atmosphere Model

2015 ◽  
Vol 8 (12) ◽  
pp. 3801-3821 ◽  
Author(s):  
K. Thayer-Calder ◽  
A. Gettelman ◽  
C. Craig ◽  
S. Goldhaber ◽  
P. A. Bogenschutz ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Climate Models ◽  
Convective Cloud ◽  
Global Climate Models ◽  
Liquid Water Path ◽  
Microphysics Scheme ◽  
Cloud Forcing ◽  
Community Atmosphere Model ◽  
Atmosphere Model ◽  
Cloud Parameterization

Abstract. Most global climate models parameterize separate cloud types using separate parameterizations. This approach has several disadvantages, including obscure interactions between parameterizations and inaccurate triggering of cumulus parameterizations. Alternatively, a unified cloud parameterization uses one equation set to represent all cloud types. Such cloud types include stratiform liquid and ice cloud, shallow convective cloud, and deep convective cloud. Vital to the success of a unified parameterization is a general interface between clouds and microphysics. One such interface involves drawing Monte Carlo samples of subgrid variability of temperature, water vapor, cloud liquid, and cloud ice, and feeding the sample points into a microphysics scheme. This study evaluates a unified cloud parameterization and a Monte Carlo microphysics interface that has been implemented in the Community Atmosphere Model (CAM) version 5.3. Model computational expense is estimated, and sensitivity to the number of subcolumns is investigated. Results describing the mean climate and tropical variability from global simulations are presented. The new model shows a degradation in precipitation skill but improvements in shortwave cloud forcing, liquid water path, long-wave cloud forcing, precipitable water, and tropical wave simulation.

scholarly journals The propagation of aerosol perturbations in convective cloud microphysics

2018 ◽  
Author(s):  
Max Heikenfeld ◽  
Bethan White ◽  
Laurent Labbouz ◽  
Philip Stier
Keyword(s):  
Cloud Condensation Nuclei ◽  
Cloud Droplet ◽  
Convective Cloud ◽  
Cloud Microphysics ◽  
Number Concentration ◽  
Microphysics Scheme ◽  
Microphysical Process ◽  
Convective Clouds ◽  
Wide Range ◽  
The Impact

Abstract. The impact of aerosols on ice- and mixed-phase processes in deep convective clouds remains highly uncertain and the wide range of interacting microphysical processes are still poorly understood. To understand these processes, we analyse diagnostic output of all individual microphysical process rates for two cloud microphysics schemes in the Weather and Research Forecasting model (WRF). We investigate the response of individual processes to changes in aerosol conditions and the propagation of perturbations through the microphysics all the way to the macrophysical development of the convective clouds. We perform simulations for two different cases of idealised supercells using two double-moment bulk microphysics schemes and a bin microphysics scheme. We use simulations with a comprehensive range of values for cloud droplet number concentration (CDNC) and cloud condensation nuclei (CCN) concentration as a proxy for aerosol effects on convective clouds. We have developed a new cloud tracking algorithm to analyse the morphology and time evolution of individually tracked convective cells in the simulations and their response to the aerosol perturbations. This analysis confirms an expected decrease in warm rain formation processes due to autoconversion and accretion for polluted conditions. The height at which the freezing occurs increases with increasing CDNC. However, there is no evidence of a significant increase in the total amount of latent heat release from freezing and riming. The cloud mass and the altitude of the cloud centre of gravity show contrasting responses to changes in proxies for aerosol number concentration between the different microphysics schemes.

Warm Cloud Evolution, Precipitation, and Their Weak Linkage in HadGEM3: New Process-Level Diagnostics using A-Train Observations

2021 ◽  
Author(s):  
Hanii Takahashi ◽  
Alejandro Bodas-Salcedo ◽  
Graeme Stephens
Keyword(s):  
Large Scale ◽  
Cloud Droplet ◽  
Formation Processes ◽  
Evaluation Tool ◽  
Liquid Water Path ◽  
Microphysics Scheme ◽  
Warm Rain ◽  
Weak Linkage ◽  
The Impact ◽  
Rain Formation

AbstractThe latest configuration of the Hadley Centre Global Environmental Model version 3 (HadGEM3) contains significant changes in the formulation of warm rain processes and aerosols. We evaluate the impacts of these changes in the simulation of warm rain formation processes using A-Train observations. We introduce a new model evaluation tool, quartile-based Contoured Frequency by Optical Depth Diagrams (CFODDs), in order to fill in some blind spots that conventional CFODDs have. Results indicate that HadGEM3 has weak linkage between the size of particle radius and warm rain formation processes, and switching to the new warm rain microphysics scheme causes more difference in warm rain formation processes than switching to the new aerosol scheme through reducing overly produced drizzle mode in HadGEM3. Finally, we run an experiment in which we perturb the second aerosol indirect effect (AIE) to study the rainfall-aerosol interaction in HadGEM3. Since the large changes in the cloud droplet number concentration (CDNC) appear in the AIE experiment, a large impact in warm rain diagnostics is expected. However, regions with large fractional changes in CDNC show a muted change in precipitation, arguably because large-scale constraints act to reduce the impact of such a big change in CDNC. The adjustment in cloud liquid water path to the AIE perturbation produces a large negative shortwave forcing in the midlatitudes.

scholarly journals MBL drizzle properties and their impact on cloud property retrievals

2015 ◽  
Vol 8 (4) ◽  
pp. 4307-4323
Author(s):  
P. Wu ◽  
X. Dong ◽  
B. Xi
Keyword(s):  
Liquid Water ◽  
Cloud Droplet ◽  
Number Concentration ◽  
Effective Radius ◽  
Liquid Water Path ◽  
Water Path ◽  
Cloud Property ◽  
Annual Means ◽  
Mean Differences ◽  
The Impact

Abstract. In this study, we retrieve and document drizzle properties, and investigate the impact of drizzle on cloud property retrievals from ground-based measurements at the ARM Azores site from June 2009 to December 2010. For the selected cloud and drizzle samples, the drizzle occurrence is 42.6% with a maximum of 55.8% in winter and a minimum of 35.6% in summer. The annual means of drizzle liquid water path LWPd, effective radius rd, and number concentration Nd for the rain (virga) samples are 5.48 (1.29) g m−2, 68.7 (39.5) μm, and 0.14 (0.38) cm−3. The seasonal mean LWPd values are less than 4% of the MWR-retrieved LWP values. The annual mean differences in cloud-droplet effective radius with and without drizzle are 0.12 and 0.38 μm, respectively, for the virga and rain samples. Therefore, we conclude that the impact of drizzle on cloud property retrievals is insignificant at the ARM Azores site.

scholarly journals A CloudSat–CALIPSO View of Cloud and Precipitation Properties across Cold Fronts over the Global Oceans

2015 ◽  
Vol 28 (17) ◽  
pp. 6743-6762 ◽  
Author(s):  
Catherine M. Naud ◽  
Derek J. Posselt ◽  
Susan C. van den Heever
Keyword(s):  
Large Scale ◽  
Cold Front ◽  
Conveyor Belt ◽  
Low Level ◽  
Scale Parameters ◽  
Convective Clouds ◽  
Cold Fronts ◽  
Surface Front ◽  
High Level ◽  
The Impact

Abstract The distribution of cloud and precipitation properties across oceanic extratropical cyclone cold fronts is examined using four years of combined CloudSat radar and CALIPSO lidar retrievals. The global annual mean cloud and precipitation distributions show that low-level clouds are ubiquitous in the postfrontal zone while higher-level cloud frequency and precipitation peak in the warm sector along the surface front. Increases in temperature and moisture within the cold front region are associated with larger high-level but lower mid-/low-level cloud frequencies and precipitation decreases in the cold sector. This behavior seems to be related to a shift from stratiform to convective clouds and precipitation. Stronger ascent in the warm conveyor belt tends to enhance cloudiness and precipitation across the cold front. A strong temperature contrast between the warm and cold sectors also encourages greater post-cold-frontal cloud occurrence. While the seasonal contrasts in environmental temperature, moisture, and ascent strength are enough to explain most of the variations in cloud and precipitation across cold fronts in both hemispheres, they do not fully explain the differences between Northern and Southern Hemisphere cold fronts. These differences are better explained when the impact of the contrast in temperature across the cold front is also considered. In addition, these large-scale parameters do not explain the relatively large frequency in springtime postfrontal precipitation.

scholarly journals The Midlatitude Continental Convective Clouds Experiment (MC3E) sounding network: operations, processing and analysis

2015 ◽  
Vol 8 (1) ◽  
pp. 421-434 ◽  
Author(s):  
M. P. Jensen ◽  
T. Toto ◽  
D. Troyan ◽  
P. E. Ciesielski ◽  
D. Holdridge ◽  
...  
Keyword(s):  
Large Scale ◽  
Scale Model ◽  
Data Sets ◽  
Central Plains ◽  
Data Set ◽  
Convective Systems ◽  
Convective Clouds ◽  
Quality Checks ◽  
Network Operations ◽  
The Impact

Abstract. The Midlatitude Continental Convective Clouds Experiment (MC3E) took place during the spring of 2011 centered in north-central Oklahoma, USA. The main goal of this field campaign was to capture the dynamical and microphysical characteristics of precipitating convective systems in the US Central Plains. A major component of the campaign was a six-site radiosonde array designed to capture the large-scale variability of the atmospheric state with the intent of deriving model forcing data sets. Over the course of the 46-day MC3E campaign, a total of 1362 radiosondes were launched from the enhanced sonde network. This manuscript provides details on the instrumentation used as part of the sounding array, the data processing activities including quality checks and humidity bias corrections and an analysis of the impacts of bias correction and algorithm assumptions on the determination of convective levels and indices. It is found that corrections for known radiosonde humidity biases and assumptions regarding the characteristics of the surface convective parcel result in significant differences in the derived values of convective levels and indices in many soundings. In addition, the impact of including the humidity corrections and quality controls on the thermodynamic profiles that are used in the derivation of a large-scale model forcing data set are investigated. The results show a significant impact on the derived large-scale vertical velocity field illustrating the importance of addressing these humidity biases.

scholarly journals A New Double-Moment Microphysics Parameterization for Application in Cloud and Climate Models. Part II: Single-Column Modeling of Arctic Clouds

2005 ◽  
Vol 62 (6) ◽  
pp. 1678-1693 ◽  
Author(s):  
H. Morrison ◽  
J. A. Curry ◽  
M. D. Shupe ◽  
P. Zuidema
Keyword(s):  
Climate Models ◽  
Heat Budget ◽  
Number Concentration ◽  
The Arctic ◽  
Liquid Water Path ◽  
Microphysics Scheme ◽  
Radiative Fluxes ◽  
Arctic Clouds ◽  
Single Column ◽  
Double Moment

Abstract The new double-moment microphysics scheme described in Part I of this paper is implemented into a single-column model to simulate clouds and radiation observed during the period 1 April–15 May 1998 of the Surface Heat Budget of the Arctic (SHEBA) and First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment–Arctic Clouds Experiment (FIRE–ACE) field projects. Mean predicted cloud boundaries and total cloud fraction compare reasonably well with observations. Cloud phase partitioning, which is crucial in determining the surface radiative fluxes, is fairly similar to ground-based retrievals. However, the fraction of time that liquid is present in the column is somewhat underpredicted, leading to small biases in the downwelling shortwave and longwave radiative fluxes at the surface. Results using the new scheme are compared to parallel simulations using other microphysics parameterizations of varying complexity. The predicted liquid water path and cloud phase is significantly improved using the new scheme relative to a single-moment parameterization predicting only the mixing ratio of the water species. Results indicate that a realistic treatment of cloud ice number concentration (prognosing rather than diagnosing) is needed to simulate arctic clouds. Sensitivity tests are also performed by varying the aerosol size, solubility, and number concentration to explore potential cloud–aerosol–radiation interactions in arctic stratus.

A Stochastic Parameter Perturbation Method to Represent Uncertainty in a Microphysics Scheme

2021 ◽  
Author(s):  
Gregory Thompson ◽  
Judith Berner ◽  
Maria Frediani ◽  
Jason A. Otkin ◽  
Sarah M. Griffin
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Random Perturbation ◽  
Longwave Radiation ◽  
Parameter Uncertainties ◽  
Microphysics Scheme ◽  
Convective Systems ◽  
Temporal Correlations ◽  
Precipitation Characteristics ◽  
The Impact

AbstractCurrent state-of-the art regional numerical weather forecasts are run at horizontal grid spacings of a few kilometers, which permits medium to large-scale convective systems to be represented explicitly in the model. With the convection parameterization no longer active, much uncertainty in the formulation of subgrid-scale processes moves to other areas such as the cloud microphysical, turbulence, and land-surface parameterizations. The goal of this study is to investigate experiments with stochastically-perturbed parameters (SPP) within a microphysics parameterization and the model’s horizontal diffusion coefficients. To estimate the “true” uncertainty due to parameter uncertainty, the magnitudes of the perturbations are chosen as realistic as possible and not with purposeful intent of maximal forecast impact as some prior work has done. Spatial inhomogeneities and temporal persistence are represented using a random perturbation pattern with spatial and temporal correlations. The impact on the distributions of various hydrometeors, precipitation characteristics, and solar/longwave radiation are quantified for a winter and summer case. In terms of upscale error growth, the impact is relatively small and consists primarily of triggering atmospheric instabilities in convectively unstable regions. In addition, small in situ changes with potentially large socio-economic impacts are observed in the precipitation characteristics such as maximum hail size. Albeit the impact of introducing physically-based parameter uncertainties within the bounds of aerosol uncertainties is small, their influence on the solar and longwave radiation balances may still have important implications for global model simulations of future climate scenarios.

Sign in / Sign up

Export Citation Format

Share Document