scholarly journals Midlatitude Wind Stress–Sea Surface Temperature Coupling in the Vicinity of Oceanic Fronts

2007 ◽  
Vol 20 (15) ◽  
pp. 3785-3801 ◽  
Author(s):  
Michael A. Spall
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Turbulent Mixing ◽  
Sea Surface ◽  
Strong Positive Correlation ◽  
Surface Winds ◽  
Near Surface ◽  
The Cross

Abstract The influences of strong gradients in sea surface temperature on near-surface cross-front winds are explored in a series of idealized numerical modeling experiments. The atmospheric model is the Naval Research Laboratory Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS) model, which is fully coupled to the Regional Ocean Modeling System (ROMS) ocean model. A series of idealized, two-dimensional model calculations is carried out in which the wind blows from the warm-to-cold side or the cold-to-warm side of an initially prescribed ocean front. The evolution of the near-surface winds, boundary layer, and thermal structure is described, and the balances in the momentum equation are diagnosed. The changes in surface winds across the front are consistent with previous models and observations, showing a strong positive correlation with the sea surface temperature and boundary layer thickness. The coupling arises mainly as a result of changes in the flux Richardson number across the front, and the strength of the coupling coefficient grows quadratically with the strength of the cross-front geostrophic wind. The acceleration of the winds over warm water results primarily from the rapid change in turbulent mixing and the resulting unbalanced Coriolis force in the vicinity of the front. Much of the loss/gain of momentum perpendicular to the front in the upper and lower boundary layer results from acceleration/deceleration of the flow parallel to the front via the Coriolis term. This mechanism is different from the previously suggested processes of downward mixing of momentum and adjustment to the horizontal pressure gradient, and is active for flows off the equator with sufficiently strong winds. Although the main focus of this work is on the midlatitude, strong wind regime, calculations at low latitudes and with weak winds show that the pressure gradient and turbulent mixing terms dominate the cross-front momentum budget, consistent with previous work.

Low-Level Cloud Response to the Gulf Stream Front in Winter Using CALIPSO*

2014 ◽  
Vol 27 (12) ◽  
pp. 4421-4432 ◽  
Author(s):  
Jing-Wu Liu ◽  
Shang-Ping Xie ◽  
Joel R. Norris ◽  
Su-Ping Zhang
Keyword(s):  
Boundary Layer ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Gulf Stream ◽  
Satellite Observations ◽  
Sea Surface ◽  
Warm Water ◽  
Low Level ◽  
Temperature Front ◽  
The Cross

Abstract A sharp sea surface temperature front develops between the warm water of the Gulf Stream and cold continental shelf water in boreal winter. This front has a substantial impact on the marine boundary layer. The present study analyzes and synthesizes satellite observations and reanalysis data to examine how the sea surface temperature front influences the three-dimensional structure of low-level clouds. The Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite captures a sharp low-level cloud transition across the Gulf Stream front, a structure frequently observed under the northerly condition. Low-level cloud top (<4 km) increases by about 500 m from the cold to the warm flank of the front. The sea surface temperature front induces a secondary low-level circulation through sea level pressure adjustment with ascending motion over the warm water and descending motion over cold water. The secondary circulation further contributes to the cross-frontal transition of low-level clouds. Composite analysis shows that surface meridional advection over the front plays an important role in the development of the marine atmospheric boundary layer and low-level clouds. Under cold northerly advection over the Gulf Stream front, strong near-surface instability leads to a well-mixed boundary layer over the Gulf Stream, causing southward deepening of low-level clouds across the sea surface temperature front. Moreover, the front affects the freezing level by transferring heat to the atmosphere and therefore influences the cross-frontal variation of the cloud phase.

Observations of Infrared Sea Surface Temperature and Air–Sea Interaction in Hurricane Edouard (2014) Using GPS Dropsondes

2017 ◽  
Vol 34 (6) ◽  
pp. 1333-1349 ◽  
Author(s):  
Jun A. Zhang ◽  
Joseph J. Cione ◽  
Evan A. Kalina ◽  
Eric W. Uhlhorn ◽  
Terry Hock ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Surface Flux ◽  
Surface Fluxes ◽  
Sea Surface ◽  
Intensity Change ◽  
Sensor Technology ◽  
Near Surface ◽  
Thermodynamic Structure

AbstractThis study highlights infrared sensor technology incorporated into the global positioning system (GPS) dropsonde platforms to obtain sea surface temperature (SST) measurements. This modified sonde (IRsonde) is used to improve understanding of air–sea interaction in tropical cyclones (TCs). As part of the Sandy Supplemental Program, IRsondes were constructed and then deployed during the 2014 hurricane season. Comparisons between SSTs measured by collocated IRsondes and ocean expendables show good agreement, especially in regions with no rain contamination. Surface fluxes were estimated using measurements from the IRsondes and AXBTs via a bulk method that requires measurements of SST and near-surface (10 m) wind speed, temperature, and humidity. The evolution of surface fluxes and their role in the intensification and weakening of Hurricane Edouard (2014) are discussed in the context of boundary layer recovery. The study’s result emphasizes the important role of surface flux–induced boundary layer recovery in regulating the low-level thermodynamic structure that is tied to the asymmetry of convection and TC intensity change.

Modeling the Atmospheric Boundary Layer Wind Response to Mesoscale Sea Surface Temperature Perturbations

2014 ◽  
Vol 142 (11) ◽  
pp. 4284-4307 ◽  
Author(s):  
Natalie Perlin ◽  
Simon P. de Szoeke ◽  
Dudley B. Chelton ◽  
Roger M. Samelson ◽  
Eric D. Skyllingstad ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Coupling Coefficient ◽  
Eddy Viscosity ◽  
Sea Surface ◽  
Coupling Coefficients ◽  
Wind Response ◽  
Speed Response

Abstract The wind speed response to mesoscale SST variability is investigated over the Agulhas Return Current region of the Southern Ocean using the Weather Research and Forecasting (WRF) Model and the U.S. Navy Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS) atmospheric model. The SST-induced wind response is assessed from eight simulations with different subgrid-scale vertical mixing parameterizations, validated using Quick Scatterometer (QuikSCAT) winds and satellite-based sea surface temperature (SST) observations on 0.25° grids. The satellite data produce a coupling coefficient of sU = 0.42 m s−1 °C−1 for wind to mesoscale SST perturbations. The eight model configurations produce coupling coefficients varying from 0.31 to 0.56 m s−1 °C−1. Most closely matching QuikSCAT are a WRF simulation with the Grenier–Bretherton–McCaa (GBM) boundary layer mixing scheme (sU = 0.40 m s−1 °C−1), and a COAMPS simulation with a form of Mellor–Yamada parameterization (sU = 0.38 m s−1 °C−1). Model rankings based on coupling coefficients for wind stress, or for curl and divergence of vector winds and wind stress, are similar to that based on sU. In all simulations, the atmospheric potential temperature response to local SST variations decreases gradually with height throughout the boundary layer (0–1.5 km). In contrast, the wind speed response to local SST perturbations decreases rapidly with height to near zero at 150–300 m. The simulated wind speed coupling coefficient is found to correlate well with the height-averaged turbulent eddy viscosity coefficient. The details of the vertical structure of the eddy viscosity depend on both the absolute magnitude of local SST perturbations, and the orientation of the surface wind to the SST gradient.

Idealized large-eddy simulations of stratocumulus advecting over cold water. Part 1: Boundary layer decoupling

2021 ◽  
Author(s):  
Youtong Zheng ◽  
Haipeng Zhang ◽  
Daniel Rosenfeld ◽  
Seoung-Soo Lee ◽  
Tianning Su ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Surface Temperature ◽  
Cold Water ◽  
Temperature Inversion ◽  
Atmospheric Modeling ◽  
Sea Surface ◽  
Entrainment Rate ◽  
Surface Cooling ◽  
Near Surface ◽  
Large Eddy

AbstractWe explore the decoupling physics of a stratocumulus-topped boundary layer (STBL) moving over cooler water, a situation mimicking the warm air advection (WADV). We simulate an initially well-mixed STBL over a doubly periodic domain with the sea surface temperature decreasing linearly over time using the System for Atmospheric Modeling large-eddy model. Due to the surface cooling, the STBL becomes increasingly stably stratified, manifested as a near-surface temperature inversion topped by a well-mixed cloud-containing layer. Unlike the stably stratified STBL in cold air advection (CADV) that is characterized by cumulus coupling, the stratocumulus deck in the WADV is unambiguously decoupled from the sea surface, manifested as weakly negative buoyancy flux throughout the sub-cloud layer. Without the influxes of buoyancy from the surface, the convective circulation in the well-mixed cloud-containing layer is driven by cloud-top radiative cooling. In such a regime, the downdrafts propel the circulation, in contrast to that in CADV regime for which the cumulus updrafts play a more determinant role. Such a contrast in convection regime explains the difference in many aspects of the STBLs including the entrainment rate, cloud homogeneity, vertical exchanges of heat and moisture, and lifetime of the stratocumulus deck, with the last being subject to a more thorough investigation in part 2. Finally, we investigate under what conditions a secondary stratus near the surface (or fog) can form in the WADV. We found that weaker subsidence favors the formation of fog whereas a more rapid surface cooling rate doesn’t.

scholarly journals Comparison of Satellite-Based Sea Surface Temperature to In Situ Observations Surrounding Coral Reefs in La Parguera, Puerto Rico

2020 ◽  
Vol 8 (6) ◽  
pp. 453
Author(s):  
Andrea M. Gomez ◽  
Kyle C. McDonald ◽  
Karsten Shein ◽  
Stephanie DeVries ◽  
Roy A. Armstrong ◽  
...  
Keyword(s):  
Puerto Rico ◽  
Coral Reefs ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Thermal Stresses ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Strong Positive Correlation ◽  
La Parguera

Coral reefs are among the most biologically diverse ecosystems on Earth. In the last few decades, a combination of stressors has produced significant declines in reef expanse, with declining reef health attributed largely to thermal stresses. We investigated the correspondence between time-series satellite remote sensing-based sea surface temperature (SST) datasets and ocean temperature monitored in situ at depth in coral reefs near La Parguera, Puerto Rico. In situ temperature data were collected for Cayo Enrique and Cayo Mario, San Cristobal, and Margarita Reef. The three satellite-based SST datasets evaluated were NOAA’s Coral Reef Watch (CoralTemp), the UK Meteorological Office’s Operational SST and Sea Ice Analysis (OSTIA), and NASA’s Jet Propulsion Laboratory (G1SST). All three satellite-based SST datasets assessed displayed a strong positive correlation (>0.91) with the in situ temperature measurements. However, all SST datasets underestimated the temperature, compared with the in situ measurements. A linear regression model using the SST datasets as the predictor for the in situ measurements produced an overall offset of ~1 °C for all three SST datasets. These results support the use of all three SST datasets, after offset correction, to represent the temperature regime at the depth of the corals in La Parguera, Puerto Rico.

scholarly journals Mean Biases, Variability, and Trends in Air–Sea Fluxes and Sea Surface Temperature in the CCSM4

2012 ◽  
Vol 25 (22) ◽  
pp. 7781-7801 ◽  
Author(s):  
Susan C. Bates ◽  
Baylor Fox-Kemper ◽  
Steven R. Jayne ◽  
William G. Large ◽  
Samantha Stevenson ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Time Scales ◽  
Hydrological Cycle ◽  
Sea Surface ◽  
Specific Humidity ◽  
Shortwave Radiation ◽  
Climate System Model ◽  
Frequency Bands

Abstract Air–sea fluxes from the Community Climate System Model version 4 (CCSM4) are compared with the Coordinated Ocean-Ice Reference Experiment (CORE) dataset to assess present-day mean biases, variability errors, and late twentieth-century trend differences. CCSM4 is improved over the previous version, CCSM3, in both air–sea heat and freshwater fluxes in some regions; however, a large increase in net shortwave radiation into the ocean may contribute to an enhanced hydrological cycle. The authors provide a new baseline for assessment of flux variance at annual and interannual frequency bands in future model versions and contribute a new metric for assessing the coupling between the atmospheric and oceanic planetary boundary layer (PBL) schemes of any climate model. Maps of the ratio of CCSM4 variance to CORE reveal that variance on annual time scales has larger error than on interannual time scales and that different processes cause errors in mean, annual, and interannual frequency bands. Air temperature and specific humidity in the CCSM4 atmospheric boundary layer (ABL) follow the sea surface conditions much more closely than is found in CORE. Sensible and latent heat fluxes are less of a negative feedback to sea surface temperature warming in the CCSM4 than in the CORE data with the model’s PBL allowing for more heating of the ocean’s surface.

scholarly journals Modeling the Near‐Surface Diurnal Cycle of Sea Surface Temperature in the Mediterranean Sea

2019 ◽  
Vol 124 (1) ◽  
pp. 171-183 ◽  
Author(s):  
S. Pimentel ◽  
W.‐H. Tse ◽  
H. Xu ◽  
D. Denaxa ◽  
E. Jansen ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Mediterranean Sea ◽  
Diurnal Cycle ◽  
Sea Surface ◽  
Near Surface ◽  
The Mediterranean
Sign in / Sign up

Export Citation Format

Share Document