scholarly journals Design of a system solution that modernizes legacy supervisory control and data acquisition systems as an early detection system

2018 ◽  
Vol 51 (7-8) ◽  
pp. 205-212 ◽  
Author(s):  
Beşir Demir ◽  
Ahmet Tumay ◽  
Mehmet Efe Ozbek ◽  
Enver Cavus
Keyword(s):  
Early Detection ◽  
Data Acquisition ◽  
Supervisory Control ◽  
High Speed ◽  
Data Transfer ◽  
Detection System ◽  
Data Acquisition Systems ◽  
Gateway System ◽  
System Solution ◽  
The Impact

Background In industrial disasters, early detection of problems and crisis management are critical for saving the lives of people and reducing the impact of disasters. Purpose In this study, we design a special gateway system that bridges the gap between different communication protocols and enables legacy supervisory control and data acquisition systems to function early detection systems for potential industrial disasters. Methods The system uses a new queue mechanism to substantially improve the problem of data loss found in conventional supervisory control and data acquisition systems and utilizes identification (ID) prioritization to enable early detection of problems. The proposed system is implemented and tested on a Linux-based, 3G-capable Modbus gateway system. Modbus is used as the communication protocol and 3G technology is utilized to provide high-speed wireless data transfer components. The Modbus gateway device uses an ARM-based EP9302 processor and has digital input/output, relay outputs, and RS485 outputs. Conclusion This study is significant as it is the first work to show the application of the priority query execution method for Modbus gateway devices.

Design of Data Transfer System Based on PCI Express Interface Applied in High-Speed Railway

2012 ◽  
Vol 229-231 ◽  
pp. 1543-1546
Author(s):  
Xiao Bo Zhou ◽  
Min Xia ◽  
Hai Long Cheng
Keyword(s):  
Data Acquisition ◽  
Data Transmission ◽  
High Speed ◽  
Data Transfer ◽  
Transmission Method ◽  
High Speed Railway ◽  
Pci Express ◽  
Data Acquisition Card ◽  
High Speed Data Acquisition ◽  
High Speed Data

To improve data transmission performance of the data acquisition card, a design of high-speed data transmission system is proposed in the thesis. Using FPGA of programmable logic devices, adopting Verilog HDL of hardware description language, the design of modularization and DMA transmission method is implemented in FPGA. Eventually the design implements the data transmission with high-speed through PCI Express interface. Through simulation and verification based on hardware system, this design is proved to be feasible and can satisfy the performance requirements of data transmission in the high-speed data acquisition card applied in high-speed railway communication. The design also has some value of application and reference for a universal data acquisition card.

Modulation and Demodulation Techniques in Indoor Visible Light Communication System

2014 ◽  
Vol 685 ◽  
pp. 306-309
Author(s):  
Hao Wang ◽  
Ze Yu Han
Keyword(s):  
Visible Light ◽  
Communication Technology ◽  
Communication System ◽  
High Speed ◽  
Data Transfer ◽  
Visible Light Communication ◽  
Communication Link ◽  
High Data ◽  
Modulation And Demodulation ◽  
The Impact

Visible light communication technology is a emerging wireless and optical communication technology developed after invention and application of white LED.In this paper, we have a research based on indoor visible light communication system of lighting white LED,discuss of the visible light communication channel characteristics,detailedly analysis of the indoor visible light communication link. This paper focuses on the modulation and demodulation method applied to visible light communication. In the past visible light communication is mainly used off keying modulation,however, the data transfer speed is limited due to the influence of ISI .This paper presents a solution based on OFDM modulation and demodulation, to reduce the impact brought from inter-symbol string under high data transfer speed.Based on data analysis and computer simulation,the program presented in this paper can be used as indoor lighting and high-speed data transmission.Finally, give scheme to achieve visible light communication modulation and demodulation,provide a theoretical basis for further experiments.

PC104 Interface Recommended for High Speed Data Acquisition Systems

2013 ◽  
Vol 332 ◽  
pp. 119-123
Author(s):  
Dorina Purcaru ◽  
Anca Purcaru
Keyword(s):  
Data Acquisition ◽  
High Speed ◽  
Low Cost ◽  
Sampling Rate ◽  
Signal Acquisition ◽  
Synchronized Sampling ◽  
Data Acquisition Systems ◽  
High Speed Data Acquisition ◽  
High Speed Data ◽  
Energetic Systems

The interface presented in this paper performs a synchronized sampling of all eight common-mode or differential analog inputs with a high sampling rate. This is a low cost interface, entirely controlled by the PC104 CPU. The paper is focused on design and operation aspects of the synchronized analog-to-digital conversion module. This interface is recommended for high speed data acquisition systems and finds its utility in energetic systems, for monitoring the power quality and for recording different specific transient events. Some programmable electronic modules which perform analog and digital signal acquisition in energetic systems already contain a PC104 interface with synchronized sampling of analog inputs; some experimental results are also presented in this paper.

scholarly journals Advances in Engine Test Capabilities at the NASA Glenn Research Center’s Propulsion Systems Laboratory

2006 ◽  
Author(s):  
Peter M. Pachlhofer ◽  
Joseph W. Panek ◽  
Dennis J. Dicki ◽  
Barry R. Piendl ◽  
Paul J. Lizanich ◽  
...  
Keyword(s):  
Data Acquisition ◽  
Control Systems ◽  
High Speed ◽  
Video Capture ◽  
Propulsion Systems ◽  
Data Acquisition Systems ◽  
Wide Range ◽  
High Speed Data Acquisition ◽  
High Speed Data ◽  
Simulation Systems

The Propulsion Systems Laboratory at the National Aeronautics and Space Administration (NASA) Glenn Research Center is one of the premier U.S. facilities for research on advanced aeropropulsion systems. The facility can simulate a wide range of altitude and Mach number conditions while supplying the aeropropulsion system with all the support services necessary to operate at those conditions. Test data are recorded on a combination of steady-state and high-speed data-acquisition systems. Recently a number of upgrades were made to the facility to meet demanding new requirements for the latest aeropropulsion concepts and to improve operational efficiency. Improvements were made to data-acquisition systems, facility and engine-control systems, test-condition simulation systems, video capture and display capabilities, and personnel training procedures. This paper discusses the facility’s capabilities, recent upgrades, and planned future improvements.

PC104 Interface Recommended for High Speed Data Acquisition Systems

2013 ◽  
Vol 325-326 ◽  
pp. 926-929 ◽  
Author(s):  
Dorina Purcaru ◽  
Cornelia Gordan ◽  
Romulus Reiz ◽  
Anca Purcaru
Keyword(s):  
Data Acquisition ◽  
High Speed ◽  
Low Cost ◽  
Sampling Rate ◽  
Digital Signal ◽  
Signal Acquisition ◽  
Synchronized Sampling ◽  
Data Acquisition Systems ◽  
High Speed Data Acquisition ◽  
High Speed Data

The interface presented in this paper is recommended for high speed data acquisition systems; it performs a synchronized sampling of all common-mode or differential analog inputs with a high sampling rate. This is a low cost interface, entirely controlled by the PC104 CPU. Programmable electronic modules that contain such PC104 interfaces can be found running in the energetic system from Romania; these dedicated equipments perform the analog and digital signal acquisition for monitoring and recording different specific transient events. Some experimental results obtained using the disturbance monitoring device PC-08/104 are also presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document