scholarly journals Experimental study on fracture propagation of hydraulic fracturing for tight sandstone outcrop

2020 ◽  
pp. 014459872097251
Author(s):  
Wenguang Duan ◽  
Baojiang Sun ◽  
Deng Pan ◽  
Tao Wang ◽  
Tiankui Guo ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Fracture Propagation ◽  
Fracture Network ◽  
Injection Rate ◽  
Oil Reservoirs ◽  
Variable Rate ◽  
Tight Sandstone ◽  
Complex Fracture ◽  
Hf Propagation ◽  
Complex Fracture Network

The tight sandstone oil reservoirs characterized by the low porosity and permeability must be hydraulically fractured to obtain the commercial production. Nevertheless, the post-fracturing production of tight oil reservoirs is not always satisfactory. The influence mechanism of various factors on the fracture propagation in the tight oil reservoirs needs further investigation to provide an optimized fracturing plan, obtain an expected fracture morphology and increase the oil productivity. Thus, the horizontal well fracturing simulations were carried out in a large-scale true tri-axial test system with the samples from the Upper Triassic Yanchang Fm tight sandstone outcrops in Yanchang County, Shaanxi, China, and the results were compared with those of fracturing simulations of the shale outcrop in the 5th member of Xujiahe Fm (abbreviated as the Xu 5th Member) in the Sichuan Basin. The effects of the natural fracture (NF) development degree, horizontal in-situ stress conditions, fracturing treatment parameters, etc. on the hydraulic fracture (HF) propagation morphology were investigated. The results show that conventional hydraulic fracturing of the tight sandstone without NFs only produces a single double-wing primary fracture. The fracture propagation path in the shale or the tight sandstone with developed NFs is controlled by the high horizontal differential stress. The higher stress difference (<12MPa) facilitates forming the complex fracture network. It is recommended to fracture the reservoir with developed NFs by injecting the high-viscosity guar gum firstly and the low-viscosity slick water then to increase the SRV. The low-to-high variable rate fracturing method is recommended as the low injection rate facilitates the fracturing fluid filtration into the NF system, and the high injection rate increases the net pressure within the fracture. The dual-horizontal well simultaneous fracturing increases the HF density and enhances the HF complexity in the reservoir, and significantly increases the possibility of forming the complex fracture network. The fracturing pressure curves reflect the fracture propagation status. According to statistical analysis, the fracturing curves are divided into types corresponding to multi-bedding plane (BP) opening, single fracture generation, multi-fracture propagation under variable rate fracturing, and forming of the fracture network through communicating the HF with NFs. The results provide a reference for the study of the HF propagation mechanism and the fracturing design in the tight sandstone reservoirs.

scholarly journals Semianalytical Coupled Model of Transient Pressure Behavior for Horizontal Well with Complex Fracture Networks in Tight Oil Reservoirs

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Ren Zongxiao ◽  
Du Kun ◽  
Shi Junfeng ◽  
Liu Wenqiang ◽  
Qu Zhan ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Variable Mass ◽  
Fracture Network ◽  
Fracture Networks ◽  
Transient Pressure ◽  
Pressure Behavior ◽  
Complex Fracture ◽  
Complex Fracture Network ◽  
Horizontal Wellbore ◽  
Seepage Model

Due to a large number of natural fractures in tight oil reservoir, many complex fracture networks are generated during fracturing operation. There are five kinds of flow media in the reservoir: “matrix, natural fracture, hydraulic fracture network, perforation hole, and horizontal wellbore”. How to establish the seepage model of liquid in multiscale medium is a challenging problem. Firstly, this paper establishes the dual medium seepage model based on source function theory, principle of superposition, and Laplace transformation and then uses the “star-triangle” transform method to establish the transient pressure behavior model in the complex fracture network. After that, perforating seepage model and variable mass flow in horizontal wellbore were established. Finally, continuous condition was used to couple the seepage model of dual medium seepage model, transient pressure behavior model in the complex fracture network, perforation seepage model, and the variable mass seepage model in horizontal wellbore, to establish a semianalytical coupled seepage model for horizontal well in tight reservoir. This paper provides theoretical basis for field application of horizontal well with complex fracture networks.

scholarly journals Study on Deliverability Evaluation of Staged Fractured Horizontal Wells in Tight Oil Reservoirs

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5857
Author(s):  
Siyu Liu ◽  
Shengchun Xiong ◽  
Dingwei Weng ◽  
Peng Song ◽  
Rou Chen ◽  
...  
Keyword(s):  
Network Structure ◽  
Horizontal Wells ◽  
Fracture Network ◽  
Stress Sensitivity ◽  
Oil Reservoirs ◽  
Tight Oil ◽  
Complex Fracture ◽  
Complex Fracture Network ◽  
Tight Oil Reservoirs ◽  
Fractured Horizontal Wells

At present, the existing deliverability evaluation models mainly consider the impact of specific factors on production, and the description of the complex fracture network structure primarily remains at the stage of an ideal dual-pore medium with uniform distribution. However, this cannot reflect the actual fracture network structure and fluid flow law of fractured horizontal wells. Thus, in this paper, a non-uniform fracture network structure is proposed considering the influence of the threshold pressure gradient and stress sensitivity characteristics on the production performance of horizontal wells. The stress sensitivity and the fractal theory are combined to characterize the permeability of the complex fracture network, and a three-zone compound unsteady deliverability model for staged fractured horizontal wells in tight oil reservoirs is successfully developed. Laplace transformation, perturbation theory, and numerical inversion are applied to obtain the semi-analytical solution of the proposed deliverability model. The reliability and accuracy of the analytical solution are verified by the classical tri-linear flow model and an oil field example. The effects of related influential parameters on the production of horizontal wells are analyzed. The deliverability evaluation method proposed in this paper can provide a theoretical basis for formulating rational development technology policies for tight oil reservoirs.

Numerical model on predicting hydraulic fracture propagation in low-permeability sandstone

2020 ◽  
pp. 105678952096320
Author(s):  
Ji Shi ◽  
Jianhua Zhang ◽  
Chunyang Zhang ◽  
Tingting Jiang ◽  
Gang Huang
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Fracture Network ◽  
Natural Fracture ◽  
Low Permeability ◽  
Zone Method ◽  
Crustal Stress ◽  
Complex Fracture ◽  
Complex Fracture Network ◽  
Hydraulic Fracture Propagation

Hydraulic fracture propagation is hard to predict due to natural joints and crustal stress. This process may lead to uncontrollable changes in hydrogeological conditions. Therefore, prediction and control of fracture propagation are paramount to permeability increase in ore-bearing reservoir. The coupled fluid-solid model was utilized to predict the hydraulic fracture propagation in low-permeability sandstone of a uranium mine. For this study, the model was modified to allow fractures to propagate randomly by using the cohesive zone method. The simulation was developed on a three-step process. First, geological data required to run the model, including crustal stress, strength and permeability, were assembled. Next, fracture propagation under different conditions of stress and injection volume were simulated. In the final step, experimental data required to validate the model were obtained. The simulation results indicate that the principal stress, distribution and orientation of natural fracture have vital influence on fracture propagation and induced complex fracture network. This work provides a theoretical basis for the application of hydraulic fracture in low-permeability sandstone reservoir and ensures the possibility to predict the generation of complex fracture network.

scholarly journals Experimental Investigation on Hydraulic Fractures in the Layered Shale Formation

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Jingyin Wang ◽  
Ying Guo ◽  
Kaixun Zhang ◽  
Guangying Ren ◽  
Jinlong Ni
Keyword(s):  
Acoustic Emission ◽  
Hydraulic Fracturing ◽  
Fracture Network ◽  
Injection Rate ◽  
Vertical Stress ◽  
Hydraulic Fractures ◽  
Stress Difference ◽  
Complex Fracture ◽  
Fracturing Process ◽  
Complex Fracture Network

Multistage fracturing of horizontal wells to form a complex fracture network is an essential technology in the exploitation of shale gas. Different from the conventional reservoirs, the mechanical characteristics of shale rock have significant heterogeneity due to the existence of beddings, which makes it difficult to predict the fracture geometry in the shale reservoir. Based on the laboratory experiments, the factors that affect fracture propagation were analyzed. The experimental results revealed that the hydraulic fracture would cross the beddings under the high vertical stress difference, while it would propagate along with the bedding under the low vertical stress difference; besides, the low injection rate and viscosity of the fracturing fluid were beneficial to generate a complex fracture network. Under the high injection rate and viscosity, a planar fracture was created, while a nonplanar fracture was observed under the low injection rate and viscosity, and branch fracture was created. According to the acoustic emission events, the shear events were the main events that occurred during the hydraulic fracturing process, and the acoustic emission events could be adopted to describe the fracture network. Lastly, the supercritical carbon dioxide fracturing was more effective compared with the hydraulic fracturing because the fracture network was more complex.

Numerical Simulation of Complex Fracture Network Development by Hydraulic Fracturing in Naturally Fractured Ultratight Formations

2013 ◽  
Author(s):  
Hannes Hofmann ◽  
Tayfun Babadagli ◽  
Günter Zimmermann
Keyword(s):  
Fracture Network ◽  
Natural Fracture ◽  
Fracture Networks ◽  
Network Development ◽  
Complex Fracture ◽  
Fracture Patterns ◽  
Fracture Systems ◽  
Fracture Development ◽  
Complex Fracture Network ◽  
Treatment Designs

The creation of large complex fracture networks by hydraulic fracturing is imperative for enhanced oil recovery from tight sand or shale reservoirs, tight gas extraction, and Hot-Dry-Rock (HDR) geothermal systems to improve the contact area to the rock matrix. Although conventional fracturing treatments may result in bi-wing fractures, there is evidence by microseismic mapping that fracture networks can develop in many unconventional reservoirs, especially when natural fracture systems are present and the differences between the principle stresses are low. However, not much insight is gained about fracture development as well as fluid and proppant transport in naturally fractured tight formations. In order to clarify the relationship between rock and treatment parameters, and resulting fracture properties, numerical simulations were performed using a commercial Discrete Fracture Network (DFN) simulator. A comprehensive sensitivity analysis is presented to identify typical fracture network patterns resulting from massive water fracturing treatments in different geological conditions. It is shown how the treatment parameters influence the fracture development and what type of fracture patterns may result from different treatment designs. The focus of this study is on complex fracture network development in different natural fracture systems. Additionally, the applicability of the DFN simulator for modeling shale gas stimulation and HDR stimulation is critically discussed. The approach stated above gives an insight into the relationships between rock properties (specifically matrix properties and characteristics of natural fracture systems) and the properties of developed fracture networks. Various simulated scenarios show typical conditions under which different complex fracture patterns can develop and prescribe efficient treatment designs to generate these fracture systems. Hydraulic stimulation is essential for the production of oil, gas, or heat from ultratight formations like shales and basement rocks (mainly granite). If natural fracture systems are present, the fracturing process becomes more complex to simulate. Our simulation results reveal valuable information about main parameters influencing fracture network properties, major factors leading to complex fracture network development, and differences between HDR and shale gas/oil shale stimulations.

Utilizing Microseismic to Monitor Fracture Geometry in a Horizontal Well in a Tight Sandstone Formation

2021 ◽  
Author(s):  
Abu M. Sani ◽  
Hatim S. AlQasim ◽  
Rayan A. Alidi
Keyword(s):  
Horizontal Well ◽  
Fracture Propagation ◽  
Horizontal Stress ◽  
Height Growth ◽  
Tight Sandstone ◽  
Fracture Geometry ◽  
Fracture Length ◽  
Sandstone Formation ◽  
Fracture Height ◽  
Maximum Horizontal Stress

Abstract This paper presents the use of real-time microseismic (MS) monitoring to understand hydraulic fracturing of a horizontal well drilled in the minimum stress direction within a high-temperature high-pressure (HTHP) tight sandstone formation. The well achieved a reservoir contact of more than 3,500 ft. Careful planning of the monitoring well and treatment well setup enabled capture of high quality MS events resulting in useful information on the regional maximum horizontal stress and offers an understanding of the fracture geometry with respect to clusters and stage spacing in relation to fracture propagation and growth. The maximum horizontal stress based on MS events was found to be different from the expected value with fracture azimuth off by more than 25 degree among the stages. Transverse fracture propagation was observed with overlapping MS events across stages. Upward fracture height growth was dominant in tighter stages. MS fracture length and height in excess of 500 ft and 100 ft, respectively, were created for most of the stages resulting in stimulated volumes that are high. Bigger fracture jobs yielded longer fracture length and were more confined in height growth. MS events fracture lengths and heights were found to be on average 1.36 and 1.30 times, respectively, to those of pressure-match.

scholarly journals Performance-based fractal fracture model for complex fracture network simulation

2017 ◽  
Vol 15 (1) ◽  
pp. 126-134 ◽  
Author(s):  
Wen-Dong Wang ◽  
Yu-Liang Su ◽  
Qi Zhang ◽  
Gang Xiang ◽  
Shi-Ming Cui
Keyword(s):  
Network Simulation ◽  
Fracture Network ◽  
Fracture Model ◽  
Complex Fracture ◽  
Complex Fracture Network ◽  
Fractal Fracture

scholarly journals A New Approach for Automatic Optimization of Complex Fracture Network in Shale Reservoirs

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 1) ◽  
Author(s):  
Haibo Wang ◽  
Tong Zhou ◽  
Fengxia Li
Keyword(s):  
Shale Gas ◽  
Flow Model ◽  
Optimization Method ◽  
Fracture Network ◽  
Gas Reservoirs ◽  
Fracture Length ◽  
Complex Fracture ◽  
Shale Gas Reservoirs ◽  
Automatic Optimization ◽  
Complex Fracture Network

Abstract Shale gas reservoirs have gradually become the main source for oil and gas production. The automatic optimization technology of complex fracture network in fractured horizontal wells is the key technology to realize the efficient development of shale gas reservoirs. In this paper, based on the flow model of shale gas reservoirs, the porosity/permeability of the matrix system and natural fracture system is characterized. The fracture network morphology is finely characterized by the fracture network expansion calculation method, and the flow model was proposed and solved. On this basis, the influence of matrix permeability, matrix porosity, fracture permeability, fracture porosity, and fracture length on the production of shale gas reservoirs is studied. The optimal design of fracture length and fracture location was carried, and the automatic optimization method of complex fracture network parameters based on simultaneous perturbation stochastic approximation (SPSA) was proposed. The method was applied in a shale gas reservoir, and the results showed that the proposed automatic optimization method of the complex fracture network in shale gas reservoirs can automatically optimize the parameters such as fracture location and fracture length and obtain the optimal fracture network distribution matching with geological conditions.

Sign in / Sign up

Export Citation Format

Share Document