scholarly journals Skeletal class II malocclusion caused by mouth breathing in a pediatric patient undergoing treatment by interceptive guidance of occlusion

2021 ◽  
Vol 49 (6) ◽  
pp. 030006052110210
Author(s):  
Lihua Lyu ◽  
Zheshan Zhao ◽  
Qianwei Tang ◽  
Jingjing Zhao ◽  
Hua Huang
Keyword(s):  
Class Ii ◽  
Mouth Breathing ◽  
Interventional Treatment ◽  
Class Ii Malocclusion ◽  
Maxillary Expansion ◽  
Nasal Breathing ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Temporomandibular Joints ◽  
Mandibular Retrusion

A 7-year 10-month-old boy was evaluated for mouth breathing and snoring habits. Examination revealed soft convex tissues, maxillary protrusion, mandibular retrusion, and a class II sagittal osteofascial pattern. The patient failed a water holding test. He was clinically diagnosed with skeletal class II malocclusion caused by mouth breathing. Under interceptive guidance of occlusion (iGo), the malocclusion improved with fixed maxillary expansion using functional appliances and interventional treatment of mouth breathing by lip closure exercises. These treatments enabled the patient to gradually return to nasal breathing and guided him to develop physiological occlusion for a coordinated jaw-to-jaw relation. At the 5-year 2-month post-correction follow-up visit (at the age of 13 years), the patient had stable occlusion, a coordinated osteofascial pattern, and normal dentition, periodontium, and temporomandibular joints.

scholarly journals Treatment of a skeletal Class II malocclusion using fixed functional appliance with miniplate anchorage

2014 ◽  
Vol 08 (02) ◽  
pp. 276-280 ◽  
Author(s):  
Mevlut Celikoglu ◽  
Tuba Unal ◽  
Mehmet Bayram ◽  
Celal Candirli
Keyword(s):  
Class Ii ◽  
Class Ii Malocclusion ◽  
Functional Appliance ◽  
Present Case Report ◽  
Skeletal Class ◽  
Fixed Functional Appliance ◽  
Skeletal Class Ii ◽  
Fixed Appliances ◽  
Mandibular Retrusion ◽  
Leveling And Alignment

ABSTRACTBased on our literature search, we found that the use of miniplate anchorage with Forsus fatigue-resistance device (FRD) has not yet been reported. Therefore, the aim of the present case report was to present the treatment of a patient with skeletal Class II malocclusion with mandibular retrusion using Forsus FRD with miniplate anchorage. Fixed appliances with 0.022-inch slots were attached to the maxillary teeth and after 8 months of the leveling and alignment of the upper arch, 0.019 × 0.025-inch stainless steel archwire was inserted and cinched back. Two weeks after the placement of the miniplates bilaterally at the symphysis of the mandible, Forsus FRD was adjusted to the miniplates with a 35-mm length of rod chosen. Nine months after the skeletal anchored Forsus worn, Class I canine and molar relations were achieved and overjet was eliminated.

scholarly journals Twin block appliance: Effect on pharyngeal airway

2018 ◽  
Vol 7 (4) ◽  
pp. 147-152
Author(s):  
Vivek Bikram Thapa ◽  
Amrita Shrestha ◽  
Prabesh Sherchan ◽  
Prakash Poudel ◽  
Luna Joshi
Keyword(s):  
Soft Palate ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Twin Block ◽  
Skeletal Class ◽  
Pharyngeal Airway ◽  
Skeletal Class Ii ◽  
Obstructive Sleep ◽  
Lateral Cephalograms ◽  
Mandibular Retrusion

Background: Mandibular retrusion is the main cause of Skeletal Class II malocclusion characterized by skeletal retrusion of mandible with skeletal or dentoalveolar protrusion of maxillary. Objectives: This study was conducted to evaluate effect of treatment with twin-block appliances on pharyngeal dimensions. Methodology: This study was conducted in in the Department of Orthodontics & Dentofacial Orthopedics in Kathmandu Medical College. Twenty patients of age group 7 to 14 years with skeletal class II malocclusion with mandibular retrusion were selected. Variables evaluated were depth of nasopharynx; height of nasopharynx; depth of oropharynx; depth of hypopharynx; soft palate length; soft palate thickness and soft palate inclination. The lateral cephalograms were obtained for all subjects before the start of treatment and after a follow-up period of approximately three months in treatment. Results: Results showed that depth of nasopharynx increased by 1 mm, height of nasopharynx increased by 0.78 mm, depth of nasopharynx increased by 1.97 mm, depth of hypopharynx increased by 0.79 mm, soft palate length decreased by 4 mm, soft palate thickness increased by 2 mm and soft palate inclination decreased by 7.01 mm. The results for depth of pharynx and soft palate thickness were statistically significant. Conclusion: This study concluded that the use of twin block appliance for class II patients corrects sagittal dimension of oropharynx and hypopharynx. Early intervention for mandibular retrognathism in class II malocclusion helps enlarge the airway dimensions and decrease potential risk of obstructive sleep apnea syndrome for growing patients in the future.

Classe II, divisão 1 – da dentição mista à permanente com aparelho ortopédico funcional e fixo

2021 ◽  
Vol 14 (54) ◽  
pp. 62-72
Author(s):  
Ivan Pedro Taffarel ◽  
Fernando Augusto Casagrande ◽  
Itamar Antonio Taffarel ◽  
Thiago Martins Meira ◽  
Orlando Tanaka
Keyword(s):  
Orthodontic Treatment ◽  
Functional Results ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Maxillary Expansion ◽  
Two Phase ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Division 1 ◽  
The Face

Orthodontic treatment of Class II, division 1 malocclusion in one or two phases is still controversial in contemporary Orthodontics. The present clinical case presents the orthodontic treatment of a 6-year-old patient with aesthetic complaint regarding the smile and bullying, presenting skeletal Class II, Class II malocclusion, Angle division 1, overjet with exaggerated protrusion of the maxillary incisors, exaggerated overbite with the lower incisors touching the palatal mucosa, absence of lip sealing and concave inferior face profile. In Phase I, rapid maxillary expansion was performed with Hyrax-type expander together with the Herbst fixed functional orthopedic device for 11 months. In Phase II, the fixed orthodontic appliance associated with intermaxillary elastics was used for 13 months. The two-phase treatment of Class II malocclusion, division 1 showed to be effective after 24 months, establishing adequate occlusal and functional results and improving the aesthetics of the lower third of the face.

scholarly journals No Compliance Correction of Class II Malocclusion in Growing Patients Whit HERBST Appliance: A Case Report

2018 ◽  
Vol 12 (1) ◽  
pp. 605-613 ◽  
Author(s):  
M. Portelli ◽  
A. Militi ◽  
M. Cicciù ◽  
A. Lo Giudice ◽  
G. Cervino ◽  
...  
Keyword(s):  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Herbst Appliance ◽  
Functional Therapy ◽  
Deep Bite ◽  
Mandibular Growth ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Mandibular Retrusion

Background:Class II malocclusion is the most common sagittal skeletal discrepancy, with a prevalent skeletal pattern of mandibular retrusion. The correction of mandibular retrusion with functional removable appliance needs a good patient’s compliance; for this reason, some clinicians prefer to use no compliance apparatus.Objective:Objective of the present therapy note is to demonstrate that the use of no compliance apparatus can provide a good correction of skeletal class II malocclusion.Methods:In the present study, authors report a therapy note referred to a 10 years old patient, woman, affected by Class II, with mandibular retrusion and deep bite, treated in 2013 at the Dep. of Orthodontics of Messina University. An orthodontic treatment has been planned with the aim of stimulating mandibular growth; an Herbst appliance with a cantilever design, bonded on first maxillary and mandibular molars, has been used. After eleven months of functional therapy a bilateral molar class I have been obtained.Results:In the therapy note proposed, authors obtained a resolution of mandibular retrusion, a correction of overjet, overbite and dental crowding in both arches, and a bilateral molar and canine class I has been achieved.Conclusion:Herbst appliance seems to be efficient in the correction of II Class Malocclusion, independently from patient’s cooperation; moreover , early correction of Class II malocclusion with functional appliances produces several clinical advantages.

scholarly journals Timely Combination Therapy of Skeletal and Dental Class II malocclusion with Temporary Anchorage Device and Mesially Impacted Mandibular 2ndMolars: A Case-Report

2021 ◽  
Vol 20 (3) ◽  
pp. 682-690
Author(s):  
Norma Ab Rahman ◽  
Mohammad Khursheed Alam ◽  
Aida Nur Ashikin Ab Rahman ◽  
Wey Mang Chek
Keyword(s):  
Treatment Plan ◽  
Medical Science ◽  
Third Molar ◽  
Cost Effective ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Maxillary Expansion ◽  
Time Saving ◽  
Skeletal Class ◽  
Skeletal Class Ii

Introduction: Patient is a 14 years old Chinese boy presented with skeletal Class II with incompetent lips, severe dental Class II malocclusion and severe crowding complicated with both sides mesio-angular impacted of mandibular 2nd molars. Treatment Plan: Growth modification using functional appliance for skeletal Class II correction with maxillary arch expansion and correction of mandibular plane angle by intrusion of maxillary molars. Extraction of lower 1st premolars and 2nd molars on both sides was carried out in conjunction with fixed orthodontic alignment and to facilitate of spontaneous eruption of lower third molar. Midline correction was followed by space closure and finishing and detailing. Results: Alignment of upper arch in the regained space with maxillary expansion without any extraction was done. Anterior maxillary dentitions were retracted using Temporary Skeletal Anchorage Devices (TSADs). In lower arch 1st molars were mesially protracted by using class II elastics. 3rd molars spontaneously erupted in the extraction space of 2nd molar. Midline corrected with good facial profile and competent lips. Conclusions: Timely execution of expert treatment plan can bring cost effective and time saving results with minimum loss. By proper counseling, patient compliance and confidence can be boosted which could have a positive effect on the treatment outcome. Bangladesh Journal of Medical Science Vol.20(3) 2021 p.682-690

scholarly journals Evaluation of the effects of skeletal anchoraged Forsus FRD using miniplates inserted on mandibular symphysis: A new approach for the treatment of Class II malocclusion

2014 ◽  
Vol 85 (3) ◽  
pp. 413-419 ◽  
Author(s):  
Tuba Unal ◽  
Mevlut Celikoglu ◽  
Celal Candirli
Keyword(s):  
Class Ii ◽  
Prospective Clinical Study ◽  
Class Ii Malocclusion ◽  
New Approach ◽  
Mandibular Symphysis ◽  
Skeletal Class ◽  
Skeletal Changes ◽  
Skeletal Class Ii ◽  
Student’S T ◽  
Mandibular Retrusion

ABSTRACT Objective:  To evaluate the skeletal, dentoalveolar, and soft tissue effects of the Forsus Fatigue Resistant Device (FRD) appliance with miniplate anchorage for the treatment of skeletal Class II malocclusion. Material and Methods:  The prospective clinical study group included 17 patients (11 girls and 6 boys; mean age 12.96 ± 1.23 years) with Class II malocclusion due to mandibular retrusion and treated with skeletal anchoraged Forsus FRD. After 0.019 × 0.025-inch stainless steel archwire was inserted and cinched back in the maxillary arch, two miniplates were placed bilaterally on the mandibular symphysis. Then, the Forsus FRD EZ2 appliance was adjusted to the miniplates without leveling the mandibular arch. The changes in the leveling and skeletal anchoraged Forsus FRD phases were evaluated by means of the Paired and Student's t-tests using the cephalometric lateral films. Results:  The success rate of the miniplates was found to be 91.5% (38 of 42 miniplates). The mandible significantly moved forward (P < .001) and caused a significant restraint in the sagittal position of the maxilla (P < .001). The overjet correction (−5.11 mm) was found to be mainly by skeletal changes (A-VRL, −1.16 mm and Pog-VRL, 2.62 mm; approximately 74%); the remaining changes were due to the dentoalveolar contributions. The maxillary and mandibular incisors were significantly retruded (P < .001). Conclusion:  This new approach was an effective method for treating skeletal Class II malocclusion due to the mandibular retrusion via a combination of skeletal and dentoalveolar changes.

Uso de propulsor mandibular fixo Flex Developer como recurso no tratamento da Classe II em paciente não colaborador

2020 ◽  
Vol 13 (52) ◽  
pp. 40-51
Author(s):  
Renato Barcellos Rédua
Keyword(s):  
Upper Airway ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Advantages And Disadvantages ◽  
Skeletal Class Ii ◽  
High Incidence ◽  
Therapeutic Alternatives ◽  
Smile Aesthetics ◽  
Treatment Alternatives

Class II malocclusion has a high incidence in the population, which may compromise smile aesthetics, occlusion function and stability. Skeletal Class II may affect facial aesthetics and upper airway volume. Class II malocclusion is routinely associated with skeletal Class II condition, having as treatment alternatives the use of Extra Buccal Appliance (EBA) or removable or fixed propulsor appliance. This article describes a case of a patient who did not accept the use of EBA and so it was fitted a Flex Developer propulsor for Class II correction and discussed the advantages and disadvantages of therapeutic alternatives for Class II correction.

A Comparison of Five Different Methods for Describing Sagittal Jaw Relationship

1993 ◽  
Vol 20 (1) ◽  
pp. 13-17 ◽  
Author(s):  
Johannes Kirchner ◽  
Stephen Williams
Keyword(s):  
Correlation Analysis ◽  
Treatment Planning ◽  
Class Ii ◽  
Diagnosis And Treatment ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Accurate Picture

Analysis of sagittal jaw relationship is important in orthodontic diagnosis and treatment planning, and can be investigated by angular or linear parameters. In the present study an analysis was performed using profile cephalograms of 40 children with skeletal Class II malocclusion. A correlation analysis is presented, involving five different methods of expressing sagittal jaw relationships. Whilst some degree of agreement could be noted, it was not possible to suggest a pair of measurements, which in combination, could give a more accurate picture of sagittal jaw relationships.

Sign in / Sign up

Export Citation Format

Share Document