Application of macromolecular chain extender and contribution to the toughening of poly(ethylene terephthalate)

2014 ◽  
Vol 29 (6) ◽  
pp. 833-849 ◽  
Author(s):  
Zhiyong Tan ◽  
Shichun Liu ◽  
Xiuli Cui ◽  
Shulin Sun ◽  
Huixuan Zhang
Keyword(s):  
Ethylene Terephthalate ◽  
Chain Extender ◽  
Macromolecular Chain ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

Tensile and Impact Properties of Recycled Poly(Ethylene Terephthalate) and Polycarbonate Composites Reinforced with Silane Treated Hollow Glass Microspheres

2018 ◽  
Vol 772 ◽  
pp. 33-37
Author(s):  
Nattakarn Hongsriphan ◽  
Pajaera Patanathabutr ◽  
Kanyakarn Lappokachai
Keyword(s):  
Mechanical Properties ◽  
Interfacial Adhesion ◽  
Ethylene Terephthalate ◽  
Chain Extender ◽  
Glass Microspheres ◽  
Hollow Glass Microspheres ◽  
Hollow Glass ◽  
Poly Ethylene Terephthalate ◽  
Fixed Composition ◽  
Poly Ethylene

Recycled poly (ethylene terephthalate) or R-PET is conventionally melt blended with polycarbonate with the presence of chain extender in order to produce polymer blend that provides good mechanical properties and cost effectiveness. This research was carried out to improve properties of such a blend by compounding them with silane treated hollow glass microspheres (HGMs), which mixing procedure was emphasized how it could affect mechanical properties. R-PET/PC/HGM composites of a fixed composition were melt compounded with three different mixing procedures. It was found that the compounding HGMs with PC and then R-PET obtained the most rigidity specimens than the all-in-one compounding or the compounding HGMs with R-PET and then PC. Silane treated HGMs were well distributed in the polymer matrix presenting good interfacial adhesion. However, the notched impact strength of all composites were inspected to be in the same range.

Improving the properties of recycled PET/PEN blends by using different chain extenders

2016 ◽  
Vol 36 (6) ◽  
pp. 615-624 ◽  
Author(s):  
Simge Can ◽  
N. Gamze Karsli ◽  
Sertan Yesil ◽  
Ayse Aytac
Keyword(s):  
Ethylene Terephthalate ◽  
Chain Extender ◽  
Degree Of Crystallinity ◽  
Recycled Pet ◽  
H Nmr ◽  
Loading Level ◽  
Poly Ethylene Terephthalate ◽  
Chain Extenders ◽  
Izod Impact ◽  
Poly Ethylene

Abstract The main aim of this study was to improve the mechanical properties of the recycled poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) (r-PET/PEN) blends by enhancing the miscibility between PET and PEN with the usage of chain extenders. This idea was novel for the recycled PET-based r-PET/PEN blends, as investigation of the effects of the chain extender usage on the properties of r-PET/PEN blends has not been studied in the literature, according to our knowledge. 1,4-Phenylene-bis-oxazoline (PBO), 1,4-phenylene-di-isocyanate (PDI), and triphenyl phosphite (TPP) were selected as chain extenders. The maximum tensile strength value was observed for the 1.0PDI sample. Moreover, PDI-based blends exhibited better Izod impact strength when compared with all other samples. The miscibility and degree of crystallinity values of all blends were discussed by means of thermal analysis. 1H-nuclear magnetic resonance (1H-NMR) analysis was carried out to determine transesterification reaction levels. According to 1H-NMR results, the increase in the level of transesterification was around 40% with the usage of PDI. The optimum loading level for selected chain extenders was determined as 1 wt.%, and PDI-based blends exhibited better properties when compared with those of the blends based on PBO and TPP at this loading level.

Reactive extrusion of recycled poly(ethylene terephthalate) with polycarbonate by addition of chain extender

2007 ◽  
Vol 104 (4) ◽  
pp. 2602-2607 ◽  
Author(s):  
Xianwen Tang ◽  
Weihong Guo ◽  
Guorong Yin ◽  
Binyao Li ◽  
Chifei Wu
Keyword(s):  
Ethylene Terephthalate ◽  
Reactive Extrusion ◽  
Chain Extender ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

scholarly journals Synthesis of 1,2-bis(2-oxazolinyl-2)ethane and its application as chain extender for poly(ethylene terephthalate)

1993 ◽  
Vol 30 (1) ◽  
pp. 13-18 ◽  
Author(s):  
Ton Loontjens ◽  
Wil Belt ◽  
Dirk Stanssens ◽  
Pierre Weerts
Keyword(s):  
Ethylene Terephthalate ◽  
Chain Extender ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

A study on the fracture, mechanical and thermal properties of chain extended recycled poly(ethylene terephthalate)

2015 ◽  
Vol 30 (8) ◽  
pp. 1157-1172 ◽  
Author(s):  
Nevin Gamze Karsli
Keyword(s):  
Thermal Properties ◽  
Ethylene Terephthalate ◽  
Chain Extender ◽  
Mechanical And Thermal Properties ◽  
Ftir Analysis ◽  
Dsc Analysis ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Impact Modifier ◽  
Poly Ethylene

The aim of this study is to simultaneously improve the mechanical strength and fracture toughness properties of recycled poly(ethylene terephthalate) (r-PET). For this purpose, Joncryl® was used as chain extender and Lotader® was used as impact modifier. The combined effect of chain extender and impact modifier on the chemical, fractural, mechanical, and thermal properties of r-PET was investigated. Fourier transformed infrared spectroscopy (FTIR) analysis, EWF analysis, tensile test, and differential scanning calorimetry (DSC) analysis were performed. FTIR analysis revealed that all the epoxy groups in the Joncryl® were consumed during the compounding. EWF results showed that while toughness of r-PET decreased with the addition of Joncryl®, toughness was increased with addition of impact modifier Lotader®. It was found that 2.5% Lotader® usage at the same time with Joncryl® increased the tensile strength of r-PET as well as toughness. It was observed from DSC analysis that chain extender and impact modifier addition did not change the thermal transition temperatures of r-PET.

scholarly journals Film Blowing of Linear and Long-Chain Branched Poly(ethylene terephthalate)

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1605 ◽  
Author(s):  
Michael Härth ◽  
Andrea Dörnhöfer
Keyword(s):  
Film Thickness ◽  
Ethylene Terephthalate ◽  
Reactive Extrusion ◽  
Chain Extender ◽  
Product Performance ◽  
Film Blowing ◽  
Melt Strength ◽  
Thickness Uniformity ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

Film blowing of Poly(ethylene terephthalate) (PET) is challenging due its inherently low melt viscosity and poor melt strength. In this study, it is shown how the rheological properties of a commercial PET can be altered by reactive extrusion using either pyromellitic dianhydride (PMDA) or a multifunctional epoxy (Joncryl® ADR 4368) as chain extender, in order to improve the processing behavior during film blowing. The modified materials were characterized by shear and elongation rheometry and relevant processing characteristics, like melt pressure, bubble stability, and film thickness uniformity, were used to assess the influence of the type of modifier on processing and product performance. It is shown that PMDA is useful to increase the melt strength which leads to an improved bubble stability, while epoxy modified PET shows a reduced drawability that can cause problems at high take-up ratios. On the other hand, the epoxy modifier indicates a pronounced strain hardening during elongational deformation, and therefore leads to a better film thickness uniformity compared to the neat PET and the PET modified with PMDA. The differences with respect to processing performance are discussed and ascribed to the molecular structure of the materials.

Sign in / Sign up

Export Citation Format

Share Document