scholarly journals Kinematic design of a translational parallel mechanism based on sub-kinematic chain determined workspace superposition

2021 ◽  
pp. 095440622110046
Author(s):  
Huiping Shen ◽  
Yinan Zhao ◽  
Guanglei Wu ◽  
Ju Li ◽  
Damien Chablat
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Inverse Kinematic ◽  
Parallel Mechanisms ◽  
Kinematic Modeling ◽  
Symbolic Model ◽  
Kinematic Design ◽  
Decoupled Motion ◽  
Topological Characteristics ◽  
Kinematic Solution

This paper presents the kinematic design of a translational parallel mechanism (PM) named Vari-Orthoglide by means of the workspace superposition, according to the sub-kinematic chain (SKC) based PM composition principle. The main topological characteristics of the manipulator with two SKCs under study, such as the position and orientation (POC) characteristics, degree of freedom (DOF) and coupling degree are analyzed, which turns out that the coupling degree equals to 1, implying the partially decoupled motion. With the topological characteristics based kinematic modeling principle, a symbolic model of the kinematics is established to derive its symbolic direct and inverse kinematic solutions. Based upon the direct kinematic solution, the workspaces for the two SKCs can be efficiently found. Moreover, the singularity loci are identified for finding the singularity-free workspace, where a regular workspace is fitted as the task workspace as expected. The presented work shows an approach to design translational parallel mechanisms considering motion decoupling and regular workspace, applicable to other types of parallel mechanisms.

scholarly journals Topological Design of an Asymmetric 3-Translational Parallel Mechanism With Zero Coupling Degree and Motion Decoupling

2018 ◽  
Author(s):  
Huiping Shen ◽  
Chengqi Wu ◽  
Damien Chablat ◽  
Guanglei Wu ◽  
Ting-li Yang
Keyword(s):  
Parallel Mechanism ◽  
Design Theory ◽  
Analytical Formula ◽  
Inverse Kinematic ◽  
Topology Design ◽  
Kinematic Chains ◽  
Topological Design ◽  
Decoupled Motion ◽  
Topological Characteristics ◽  
Zero Coupling

In this paper a new asymmetric 3-translational (3T) parallel manipulator, i.e., RPa(3R) 2R+RPa, with zero coupling degree and decoupled motion is firstly proposed according to topology design theory of parallel mechanism (PM) based on position and orientation characteristics (POC) equations. The main topological characteristics such as POC, degree of freedom and coupling degree are calculated. Then, the analytical formula for the direct and inverse kinematic are directly derived since coupling degree of the PM is zero. The study of singular configurations is simple because of the independence of the kinematic chains.

scholarly journals A Translational Three-Degrees-of-Freedom Parallel Mechanism With Partial Motion Decoupling and Analytic Direct Kinematics

2020 ◽  
Vol 12 (2) ◽  
Author(s):  
Huiping Shen ◽  
Damien Chablat ◽  
Boxiong Zeng ◽  
Ju Li ◽  
Guanglei Wu ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Design Theory ◽  
Degrees Of Freedom ◽  
Analytic Solutions ◽  
Inverse Kinematic ◽  
Kinematic Modeling ◽  
Topological Design ◽  
Prismatic Joints ◽  
Topological Characteristics ◽  
Three Degrees Of Freedom

Abstract According to the topological design theory and the method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper studied a three-degrees-of-freedom (3-DOF) translational PM that has three advantages, i.e., (i) it consists of three fixed actuated prismatic joints, (ii) the PM has analytic solutions to the direct and inverse kinematic problems, and (iii) the PM is of partial motion decoupling property. First, the main topological characteristics, such as the POC, degree-of-freedom, and coupling degree, were calculated for kinematic modeling. Thanks to these properties, the direct and inverse kinematic problems can be readily solved. Further, the conditions of the singular configurations of the PM were analyzed, which corresponds to its partial motion decoupling property.

scholarly journals Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

2019 ◽  
Vol 32 (1) ◽  
Author(s):  
Haitao Liu ◽  
Ke Xu ◽  
Huiping Shen ◽  
Xianlei Shan ◽  
Tingli Yang
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Analytic Solutions ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Real Time Control ◽  
Time Control ◽  
Topological Characteristics ◽  
Zero Coupling

Abstract Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest. Based on this purpose, this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism. With the aid of the theory of mechanism topology, the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented, which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism. Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed, resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree. One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics. The process of type synthesis is in the order of permutation and combination; therefore, there are no omissions. This method is also applicable to other configurations, and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

Inverse Kinematic Solution and Dynamic Model to 3PTT Parallel Mechanism

2014 ◽  
Vol 945-949 ◽  
pp. 1421-1425
Author(s):  
Xiu Qing Hao
Keyword(s):  
Dynamic Model ◽  
Dynamic Simulation ◽  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Euler Method ◽  
Research Subject ◽  
Adams Software ◽  
Inverse Kinematic Analysis ◽  
Simulation Results ◽  
Kinematic Solution

Take typical parallel mechanism 3PTT as research subject, its inverse kinematic analysis solution was gotten. Dynamic model of the mechanism was established by Newton-Euler method, and the force and torque equations were derived. Dynamic simulation of 3PTT parallel mechanism was done by using ADAMS software, and simulation results have verified the correctness of the theoretical conclusions.

The Manta and the Kanuk: Novel 4-DOF Parallel Mechanisms for Industrial Handling

1999 ◽  
Author(s):  
Luc H. Rolland
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Parallel Robot ◽  
Chain Structure ◽  
Parallel Robots ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Low Mass ◽  
Loading And Unloading ◽  
Very High

Abstract Two novel 4-DOF very fast parallel robots were designed. This paper introduces the new parallel mechanism designs which are named the Manta and the Kanuk. In order to reduce manipulator overall costs, the actuator and encoder numbers are minimized to the exact effective degrees-of-freedoms (DOF) which is usually not the case in most parallel robot designs. The robots allow end-effector displacements along the three Cartesian translations and one platform transversal rotation. The two remaining rotations are blocked by the intrinsic mechanical structure including the rotation along the platform normal which is always limited in range. The main advantages are high stiffness through the multiple kinematic chain structure which allow for low mass designs. Moreover, they feature simple mechanical construction. Thus, it shall be possible to achieve very high throughput since high accelerations are feasible. To circumvent the known workspace limitations, the actuators were selected to be prismatic along linear axes. The applications are automated warehouse manipulation, mediatheque manipulation, machine tool tool changers, loading and unloading.

Determination of Singularity-Free Zones in the Workspace of Planar Parallel Mechanisms with Revolute Actuators

2011 ◽  
Vol 121-126 ◽  
pp. 1992-1996 ◽  
Author(s):  
Shu Jun Li ◽  
Clément Gosselin
Keyword(s):  
Trajectory Planning ◽  
Parallel Mechanism ◽  
Numerical Results ◽  
Parallel Mechanisms ◽  
Kinematic Design ◽  
Cartesian Space ◽  
Singularity Locus

The singularity-free workspace of parallel mechanisms is important in the trajectory planning and the kinematic design of the mechanisms. The planar parallel mechanism with revolute actuators, which the expression for the singularity locus and the algorithms for determining the singularity-free zones involve both the Cartesian and the joint variables, has been studied in the paper. Algorithms are proposed here to simplify the determination of the singularity-free zones in Cartesian space. The methodology and procedures for determining the singularity-free zones of planar parallel mechanisms with revolute actuators are introduced. The numerical results show that the simplified algorithms and the techniques are correct and efficient in determining singularity-free zones in the workspace of planar parallel mechanisms.

Compositional Submanifolds of Prismatic–Universal–Prismatic and Skewed Prismatic–Revolute– Prismatic Kinematic Chains and Their Derived Parallel Mechanisms

2018 ◽  
Vol 10 (3) ◽  
Author(s):  
Xinsheng Zhang ◽  
Pablo López-Custodio ◽  
Jian S. Dai
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Planar Motion ◽  
Helical Motion ◽  
Parallel Mechanisms ◽  
Motion Group ◽  
Revolute Joint ◽  
Kinematic Chains ◽  
Prismatic Joint ◽  
Joint Axis

The kinematic chains that generate the planar motion group in which the prismatic-joint direction is always perpendicular to the revolute-joint axis have shown their effectiveness in type synthesis and mechanism analysis in parallel mechanisms. This paper extends the standard prismatic–revolute–prismatic (PRP) kinematic chain generating the planar motion group to a relatively generic case, in which one of the prismatic joint-directions is not necessarily perpendicular to the revolute-joint axis, leading to the discovery of a pseudo-helical motion with a variable pitch in a kinematic chain. The displacement of such a PRP chain generates a submanifold of the Schoenflies motion subgroup. This paper investigates for the first time this type of motion that is the variable-pitched pseudo-planar motion described by the above submanifold. Following the extraction of a helical motion from this skewed PRP kinematic chain, this paper investigates the bifurcated motion in a 3-prismatic–universal–prismatic (PUP) parallel mechanism by changing the active geometrical constraint in its configuration space. The method used in this contribution simplifies the analysis of such a parallel mechanism without resorting to an in-depth geometrical analysis and screw theory. Further, a parallel platform which can generate this skewed PRP type of motion is presented. An experimental test setup is based on a three-dimensional (3D) printed prototype of the 3-PUP parallel mechanism to detect the variable-pitched translation of the helical motion.

Mobility Analysis of a Novel 3-5R Parallel Mechanism Family

2004 ◽  
Vol 126 (1) ◽  
pp. 79-82 ◽  
Author(s):  
Q. C. Li ◽  
Z. Huang
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Kinematic Chain ◽  
Parallel Mechanisms ◽  
Mobility Analysis

Mobility analysis of a novel 3-5R parallel mechanism family whose limb consists of a 2R and a 3R parallel subchain is performed by the aid of screw theory. A mobility criterion applicable to such 3-leg parallel mechanisms in which each kinematic chain contains five kinematic pairs is proposed. It is shown that under different structural conditions, the 3-5R parallel mechanism can have 3, 4, or 5 DOF (degrees of freedom). The structural conditions that guarantee the full-cycle mobility are analyzed. The analysis and the method presented in this paper will be helpful in using such a 3-5R parallel mechanism family and introduce new insights into the mobility analysis of parallel mechanisms.

Workspace Analysis of New Type Parallel Mechanism with Serial Input

2011 ◽  
Vol 308-310 ◽  
pp. 2114-2119 ◽  
Author(s):  
Peng Lin Jing ◽  
Zhi You Feng
Keyword(s):  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Parallel Mechanisms ◽  
Constraint Force ◽  
Workspace Analysis ◽  
Inverse Solutions ◽  
New Type ◽  
Parallel Link ◽  
Branched Chain ◽  
The Impact

A new 4 DOF parallel mechanism with serial input limb is presented ——2UPS-RPU parallel mechanism, the limb with serial input is a less contrained active branched-chain,the number of its DOF is less than six,that is to say,the limbs not only transmitting driving force but also constraint force at the same time.Compared with traditional parallel mechanisms,the mechanism with serial input has greater number of DOF than the number of limbs and don’t lose the property of parallel mechanism. The inverse solutions to positions of the mechanism are modeled by inverse kinematic analysis in this paper, then the constraint conditions are established according to factors influencing the workspace of parallel mechanism,such as the limits of the hinge angle and the parallel link length.The workspace of 2UPS-RPU parallel mechanism can be obtained by using exetreme-boundary numerical algorithm in Matlab,the volume of workspace can be quantified by means of computation,and analyzing the impact of rod length ,circumradius of moving and fixed platform and motion pair rotation angle on the workspace.

Sign in / Sign up

Export Citation Format

Share Document