A fatigue life prediction method from magnetic pole material to simulation part

2019 ◽  
Vol 28 (9) ◽  
pp. 1438-1454 ◽  
Author(s):  
Long Pan ◽  
Jian Chao Pang ◽  
Yu Jun Xie ◽  
Meng Xiao Zhang ◽  
Liang Liang Nie ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Prediction Method ◽  
Fatigue Life Prediction ◽  
Sensitivity Factor ◽  
Magnetic Pole ◽  
Element Analysis ◽  
Fatigue Notch Factor ◽  
Effect Of Surface ◽  
Good Agreement

Due to the higher reliability needs of the large moving component motor-generator rotor, the assessment of the service life has drawn more and more attention. After finite element analysis of the rotor, the simulation part which can represent the magnetic pole with the most dangerous position of the rotor was designed to investigate the S–N curves. Compared with the conventional specimen, considering the main influencing factors of fatigue life for simulation part, the comprehensive factor was proposed to establish the fatigue life relationship between magnetic pole material and simulation part. It was found that the calculation method of fatigue notch factor based on the notch sensitivity factor is relatively simple and practical, and there is no significant effect of surface roughness on high and low cycle fatigues for low roughness ( R a is about 1 µm), and the dimension factor changes linearly with the scale factor. Based on those results, a fatigue life prediction method was proposed and validated, and the predicted results were in good agreement with the experimental data. This study will provide a reasonable reference to determine the fatigue life prediction of large moving components.

scholarly journals Research on the Fatigue Life Prediction Method of Thrust Rod

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
Guoyu Feng ◽  
Wenku Shi ◽  
Henghai Zhang ◽  
Qinghua Zu ◽  
Teng Teng ◽  
...  
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Fatigue Damage ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Equivalent Stress ◽  
Prediction Method ◽  
Fatigue Life Prediction ◽  
Model Parameters ◽  
Element Analysis

Purpose of this paper is to investigate the fatigue life prediction method of the thrust rod based on the continuum damage mechanics. The equivalent stress used as damage parameters established rubber fatigue life prediction model. Through the finite element simulation and material test, the model parameters and the fatigue damage dangerous positions were obtained. By equivalent stress life model, uniaxial fatigue life of the V-type thrust rod is analyzed to predict the ratio of life and the life of the test was 1.73, within an acceptable range, and the fatigue damage occurring position and finite element analysis are basically the same. Fatigue life analysis shows that the method is of correct, theoretical, and practical value.

Fatigue Life Prediction of Buckling String with Cracks in Horizontal Wells of Mining Engineering

2012 ◽  
Vol 577 ◽  
pp. 127-131 ◽  
Author(s):  
Peng Wang ◽  
Tie Yan ◽  
Xue Liang Bi ◽  
Shi Hui Sun
Keyword(s):  
Fatigue Life ◽  
Prediction Model ◽  
Life Prediction ◽  
Horizontal Well ◽  
Drill Pipe ◽  
Prediction Method ◽  
Drill String ◽  
Fatigue Life Prediction ◽  
Mining Engineering ◽  
Life Prediction Model

Fatigue damage in the rotating drill pipe in the horizontal well of mining engineering is usually resulted from cyclic bending stresses caused by the rotation of the pipe especially when it is passing through curved sections or horizontal sections. This paper studies fatigue life prediction method of rotating drill pipe which is considering initial crack in horizontal well of mining engineering. Forman fatigue life prediction model which considering stress ratio is used to predict drill string fatigue life and the corresponding software has been written. The program can be used to calculate the stress of down hole assembly, can predict stress and alternating load in the process of rotating-on bottom. Therefore, establishing buckling string fatigue life prediction model with cracks can be a good reference to both operation and monitor of the drill pipe for mining engineering.

TTK Chitra tilting disc heart valve model TC2: An assessment of fatigue life and durability

2017 ◽  
Vol 231 (8) ◽  
pp. 758-765 ◽  
Author(s):  
NN Subhash ◽  
Adathala Rajeev ◽  
Sreedharan Sujesh ◽  
CV Muraleedharan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Heart Valve ◽  
Life Prediction ◽  
Heart Valves ◽  
Failure Modes ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Valve Model

Average age group of heart valve replacement in India and most of the Third World countries is below 30 years. Hence, the valve for such patients need to be designed to have a service life of 50 years or more which corresponds to 2000 million cycles of operation. The purpose of this study was to assess the structural performance of the TTK Chitra tilting disc heart valve model TC2 and thereby address its durability. The TC2 model tilting disc heart valves were assessed to evaluate the risks connected with potential structural failure modes. To be more specific, the studies covered the finite element analysis–based fatigue life prediction and accelerated durability testing of the tilting disc heart valves for nine different valve sizes. First, finite element analysis–based fatigue life prediction showed that all nine valve sizes were in the infinite life region. Second, accelerated durability test showed that all nine valve sizes remained functional for 400 million cycles under experimental conditions. The study ensures the continued function of TC2 model tilting disc heart valves over duration in excess of 50 years. The results imply that the TC2 model valve designs are structurally safe, reliable and durable.

The Fatigue Life Prediction Method for Multi-Spot-Welded Structures

1993 ◽  
Author(s):  
Y. Rui ◽  
R. S. Borsos ◽  
R. Gopalakrishnan ◽  
H. N. Agrawal ◽  
C. Rivard
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Prediction Method ◽  
Fatigue Life Prediction ◽  
Welded Structures ◽  
Spot Welded
Sign in / Sign up

Export Citation Format

Share Document